Oukitel WP5 Pro

Search This thread

SwedishForenger

Senior Member
Mar 26, 2021
264
49
Is there a way to get rid of the orange state message on each boot-up?
.

Yes. just reboot your phone in to Fastboot. Open the Install Android folder, Right click inside of it and select ´Open powershell´. Copy and paste these 3 commands and press enter. Plug in your USB cable

Code:
./fastboot flash lk lk-verified.img
./fastboot flash lk2 lk-verified.img
./fastboot reboot

For Linux Terminal
Code:
fastboot flash lk lk-verified.img
fastboot flash lk2 lk-verified.img
fastboot reboot

Done

.
 

Attachments

  • Android Installer.zip
    70.6 MB · Views: 13
Last edited:

arturenas

Member
May 28, 2022
20
0
.

Yes. just reboot your phone in to Fastboot. Open the Install Android folder, Right click inside of it and select ´Open powershell´. Copy and paste these 3 commands and press enter. Plug in your USB cable

Code:
./fastboot flash lk lk-verified.img
./fastboot flash lk2 lk-verified.img
./fastboot reboot

For Linux Terminal
Code:
fastboot flash lk lk-verified.img
fastboot flash lk2 lk-verified.img
fastboot reboot

Done

.

I typed this in and after reboot phone ended up bricked in white screen (no errors in script).

When you first made DotOs script, do you remember if it included flashing lk-verified.img? Cause when I used your newest install script I kept getting white screen. But when I used your old script to install (possibly without lk-verified.img command) custom rom flashing worked. Should I maybe try a different lk-verified.img from oukitel 11 instead of 10? What do you think?
 
Last edited:

SwedishForenger

Senior Member
Mar 26, 2021
264
49
I typed this in and after reboot phone ended up bricked in white screen (no errors in script).

When you first made DotOs script, do you remember if it included flashing lk-verified.img? Cause when I used your newest install script I kept getting white screen. But when I used your old script to install (possibly without lk-verified.img command) custom rom flashing worked. Should I maybe try a different lk-verified.img from oukitel 11 instead of 10? What do you think?
.

The vbmeta.img

The vbmeta is akin to SecureBoot, it uses hashes for each stage of the boot process to ensure that the final operating environment hasn't been tampered with at any stage of the startup process. By flashing a blank / Nulled universal vbmeta.img, you are basically telling the phone that there are no hashes / keys associated with this version of Android and the phone skips the verification process and allows you to boot the phone. If you do NOT flash this vbmeta.img file, the phone detects that you have modified the system and you end up in ´RED STATE´ on the phone and it enters the boot loop. To prevent you from using unverified android versions that could damage the phones flash-drive and the drivers used for controlling the phones hardware functions, like buttons and the screen Etc Etc.

lk-verified.img

Verified boot. Verified Boot strives to ensure all executed code comes from a trusted source (usually device factory), rather than from an attacker or corruption. As soon as you tick the Unlock OEM in settings and flash the command: fastboot --disable-verification flash boot boot.img have you also turned off the phone's internal security system, meant to warn you, that your phone is compromised, and ending up in a ORANGE STATE message during boot, prolonging the boot-up sequence with 5 seconds, to warn you about the corrupted system.

By flashing blank / Nulled universal lk-verified.img, are you telling your system that you are aware of the problem and now turnd off the alert. The phone sees your message in lk-verified.img during boot, and now lets you boot up your phone without ORANGE STATE message.

It is technically just 2 signed files with 4 rows of code inside.
These 2 files are universal for any flashable phones that have roms that use these files.
However ...! Many people sign their own files, instead of using these universal ones.
But for our phone, these files work just fine.


_____________________________________________________________

It's hard for me to know exactly what you're doing when it's not working for you.
I have had thousands of private PMs from people who liked this install script and how it worked perfectly for them with my instructions on the first try, fast en simple.

Let's try installing your GSI in 2 part instead on your phone :)
Download Install script.zip and move the 2 files inside to Android Install folder you have on your desktop. Or download the Android installer with these 2 files already inside.

Step 1. Put your phone in Fastboot mode and connect the USB cable.

Step 2. Put your GSI file you want to flash in to the Android Install folder.

Step 3. Double-click AA * Part 1- install GSI.bat ---- Installing the GSI now ....

Step 4. Enter the settings and enable OEM Unlock and USB debugging.

Step 5. Reboot the phone in to FastBoot mode and connect the USB cable again.

Step 6. Double-click AA * Part 2- install GSI.bat

Done .....



.
 

Attachments

  • Android Installer.zip
    70.6 MB · Views: 15
  • Install script.zip
    679 bytes · Views: 12
Last edited:

SwedishForenger

Senior Member
Mar 26, 2021
264
49
I typed this in and after reboot phone ended up bricked in white screen (no errors in script).

When you first made DotOs script, do you remember if it included flashing lk-verified.img? Cause when I used your newest install script I kept getting white screen. But when I used your old script to install (possibly without lk-verified.img command) custom rom flashing worked. Should I maybe try a different lk-verified.img from oukitel 11 instead of 10? What do you think?
.

When you copying and pasting commands, do you use ./ before your commandsin Windows?
Like this:

./fastboot flashing unlock

Ore

fastboot flashing unlock

.
 
Last edited:

arturenas

Member
May 28, 2022
20
0
.

The vbmeta.img

The vbmeta is akin to SecureBoot, it uses hashes for each stage of the boot process to ensure that the final operating environment hasn't been tampered with at any stage of the startup process. By flashing a blank / Nulled universal vbmeta.img, you are basically telling the phone that there are no hashes / keys associated with this version of Android and the phone skips the verification process and allows you to boot the phone. If you do NOT flash this vbmeta.img file, the phone detects that you have modified the system and you end up in ´RED STATE´ on the phone and it enters the boot loop. To prevent you from using unverified android versions that could damage the phones flash-drive and the drivers used for controlling the phones hardware functions, like buttons and the screen Etc Etc.

lk-verified.img

Verified boot. Verified Boot strives to ensure all executed code comes from a trusted source (usually device factory), rather than from an attacker or corruption. As soon as you tick the Unlock OEM in settings and flash the command: fastboot --disable-verification flash boot boot.img have you also turned off the phone's internal security system, meant to warn you, that your phone is compromised, and ending up in a ORANGE STATE message during boot, prolonging the boot-up sequence with 5 seconds, to warn you about the corrupted system.

By flashing blank / Nulled universal lk-verified.img, are you telling your system that you are aware of the problem and now turnd off the alert. The phone sees your message in lk-verified.img during boot, and now lets you boot up your phone without ORANGE STATE message.

It is technically just 2 signed files with 4 rows of code inside.
These 2 files are universal for any flashable phones that have roms that use these files.
However ...! Many people sign their own files, instead of using these universal ones.
But for our phone, these files work just fine.


_____________________________________________________________

It's hard for me to know exactly what you're doing when it's not working for you.
I have had thousands of private PMs from people who liked this install script and how it worked perfectly for them with my instructions on the first try, fast en simple.

Let's try installing your GSI in 2 part instead on your phone :)
Download Install script.zip and move the 2 files inside to Android Install folder you have on your desktop. Or download the Android installer with these 2 files already inside.

Step 1. Put your phone in Fastboot mode and connect the USB cable.

Step 2. Put your GSI file you want to flash in to the Android Install folder.

Step 3. Double-click AA * Part 1- install GSI.bat ---- Installing the GSI now ....

Step 4. Enter the settings and enable OEM Unlock and USB debugging.

Step 5. Reboot the phone in to FastBoot mode and connect the USB cable again.

Step 6. Double-click AA * Part 2- install GSI.bat

Done .....



.

I'll try this out some day and say what the results are. Either way I am very thankful for the custom rom I can run now : )
 

arturenas

Member
May 28, 2022
20
0
.

The vbmeta.img

The vbmeta is akin to SecureBoot, it uses hashes for each stage of the boot process to ensure that the final operating environment hasn't been tampered with at any stage of the startup process. By flashing a blank / Nulled universal vbmeta.img, you are basically telling the phone that there are no hashes / keys associated with this version of Android and the phone skips the verification process and allows you to boot the phone. If you do NOT flash this vbmeta.img file, the phone detects that you have modified the system and you end up in ´RED STATE´ on the phone and it enters the boot loop. To prevent you from using unverified android versions that could damage the phones flash-drive and the drivers used for controlling the phones hardware functions, like buttons and the screen Etc Etc.

lk-verified.img

Verified boot. Verified Boot strives to ensure all executed code comes from a trusted source (usually device factory), rather than from an attacker or corruption. As soon as you tick the Unlock OEM in settings and flash the command: fastboot --disable-verification flash boot boot.img have you also turned off the phone's internal security system, meant to warn you, that your phone is compromised, and ending up in a ORANGE STATE message during boot, prolonging the boot-up sequence with 5 seconds, to warn you about the corrupted system.

By flashing blank / Nulled universal lk-verified.img, are you telling your system that you are aware of the problem and now turnd off the alert. The phone sees your message in lk-verified.img during boot, and now lets you boot up your phone without ORANGE STATE message.

It is technically just 2 signed files with 4 rows of code inside.
These 2 files are universal for any flashable phones that have roms that use these files.
However ...! Many people sign their own files, instead of using these universal ones.
But for our phone, these files work just fine.


_____________________________________________________________

It's hard for me to know exactly what you're doing when it's not working for you.
I have had thousands of private PMs from people who liked this install script and how it worked perfectly for them with my instructions on the first try, fast en simple.

Let's try installing your GSI in 2 part instead on your phone :)
Download Install script.zip and move the 2 files inside to Android Install folder you have on your desktop. Or download the Android installer with these 2 files already inside.

Step 1. Put your phone in Fastboot mode and connect the USB cable.

Step 2. Put your GSI file you want to flash in to the Android Install folder.

Step 3. Double-click AA * Part 1- install GSI.bat ---- Installing the GSI now ....

Step 4. Enter the settings and enable OEM Unlock and USB debugging.

Step 5. Reboot the phone in to FastBoot mode and connect the USB cable again.

Step 6. Double-click AA * Part 2- install GSI.bat

Done .....



.

Tried on my other oukitel wp5 pro with android 10 and stock rom. But double clicking AA * Part 1- install GSI.bat and AA * Part 2- install GSI.bat does nothing. (well more like cmd.exe pops up for like 1 second and closes)
 
Last edited:

SwedishForenger

Senior Member
Mar 26, 2021
264
49
Tried on my other oukitel wp5 pro with android 10 and stock rom. But double clicking AA * Part 1- install GSI.bat and AA * Part 2- install GSI.bat does nothing. (well more like cmd.exe pops up for like 1 second and closes)

.

No... You need to put the two files in the Install Android Script folder, with the GSI.img file before, opening them.

.
 

alexshestakov

Member
Mar 25, 2017
11
0
Motorola Defy (2021)
Hello. I have no experience with flashing firmware. Tried to install GSI.img to stock V12, never updated to V15. and got a gray screen at startup, then started dancing with a tambourine. allowed formatting + through SP_Flash_Tool_exe_Windows_v5.2020.00.000 flashed by him on the stock V11 which he took on the official site, as a result I now have V11 installed and the red text DEBUG MODE.

After two days of reading the forum, I came to the conclusion that I definitely need to flash the stock version of V15, but I can’t find it anywhere.

Dear forum users, please give me a link to the stock V15.



Sorry for my English, I use google translator.
 

SwedishForenger

Senior Member
Mar 26, 2021
264
49
Hello. I have no experience with flashing firmware. Tried to install GSI.img to stock V12, never updated to V15. and got a gray screen at startup, then started dancing with a tambourine. allowed formatting + through SP_Flash_Tool_exe_Windows_v5.2020.00.000 flashed by him on the stock V11 which he took on the official site, as a result I now have V11 installed and the red text DEBUG MODE.

After two days of reading the forum, I came to the conclusion that I definitely need to flash the stock version of V15, but I can’t find it anywhere.

Dear forum users, please give me a link to the stock V15.



Sorry for my English, I use google translator.

.

It's Ok ... We're all been beginners at some point. I will try to answer all your questions, guide you or give you advice.

There is no V15. You install V11 and update the Firmware 2 times, by connecting the phone to your WiFi an opening Wireless update, and and updates 2 times, and u get V15.

software_ui_apps_2.png


.
 

alexshestakov

Member
Mar 25, 2017
11
0
Motorola Defy (2021)
I tried this many times before I decided to seek help. Used different WiFi connections, and also tried over a mobile network, with different SIM cards, but the result is always the same "You use the latest version"

Out of the box I had the android 11 v12 and it wasn't updated to v15. Firmware v12 from the manufacturer is a complete failure, and I decided to experiment, well, how is firewood broken (

After an unsuccessful firmware through Android installer.zip, he could not normally turn off the phone and flashed it in format + download mode in the SP flash tool, and I erased something important to go because the imei disappeared, most likely I erased the nvram section.

Then I recovered imei, updated all the drivers and once again 10 tried to install various GSI.img using Android installer, the firmware process itself runs smoothly, but after rebooting the screen lights up in light gray, makes sounds and reacts with the sensor, but does not show anything (. As I understood the fact is that I did not receive v15 updates and there are not enough files in the phone.
.

It's Ok ... We're all been beginners at some point. I will try to answer all your questions, guide you or give you advice.

There is no V15. You install V11 and update the Firmware 2 times, by connecting the phone to your WiFi an opening Wireless update, and and updates 2 times, and u get V15.



.
I tried this many times before I decided to seek help. Used different WiFi connections, and also tried over a mobile network, with different SIM cards, but the result is always the same "You use the latest version"

Out of the box I had the android 11 v12 and it wasn't updated to v15. Firmware v12 from the manufacturer is a complete failure, and I decided to experiment, well, how is firewood broken (

After an unsuccessful firmware through Android installer.zip, he could not normally turn off the phone and flashed it in format + download mode in the SP flash tool, and I erased something important to go because the imei disappeared, most likely I erased the nvram section.

Then I recovered imei, updated all the drivers and once again 10 tried to install various GSI.img using Android installer, the firmware process itself runs smoothly, but after rebooting the screen lights up in light gray, makes sounds and reacts with the sensor, but does not show anything (. As I understood the fact is that I did not receive v15 updates and there are not enough files in the phone.
 

Attachments

  • Screenshot_20220624-082535.png
    Screenshot_20220624-082535.png
    73 KB · Views: 8

SwedishForenger

Senior Member
Mar 26, 2021
264
49
I tried this many times before I decided to seek help. Used different WiFi connections, and also tried over a mobile network, with different SIM cards, but the result is always the same "You use the latest version"

Out of the box I had the android 11 v12 and it wasn't updated to v15. Firmware v12 from the manufacturer is a complete failure, and I decided to experiment, well, how is firewood broken (

After an unsuccessful firmware through Android installer.zip, he could not normally turn off the phone and flashed it in format + download mode in the SP flash tool, and I erased something important to go because the imei disappeared, most likely I erased the nvram section.

Then I recovered imei, updated all the drivers and once again 10 tried to install various GSI.img using Android installer, the firmware process itself runs smoothly, but after rebooting the screen lights up in light gray, makes sounds and reacts with the sensor, but does not show anything (. As I understood the fact is that I did not receive v15 updates and there are not enough files in the phone.

I tried this many times before I decided to seek help. Used different WiFi connections, and also tried over a mobile network, with different SIM cards, but the result is always the same "You use the latest version"

Out of the box I had the android 11 v12 and it wasn't updated to v15. Firmware v12 from the manufacturer is a complete failure, and I decided to experiment, well, how is firewood broken (

After an unsuccessful firmware through Android installer.zip, he could not normally turn off the phone and flashed it in format + download mode in the SP flash tool, and I erased something important to go because the imei disappeared, most likely I erased the nvram section.

Then I recovered imei, updated all the drivers and once again 10 tried to install various GSI.img using Android installer, the firmware process itself runs smoothly, but after rebooting the screen lights up in light gray, makes sounds and reacts with the sensor, but does not show anything (. As I understood the fact is that I did not receive v15 updates and there are not enough files in the phone.
.

To be honest with you, I don't know if their are updates for the Russian market up to V15.
But what you can do, is flash the European version of Android and update.


.
 

SwedishForenger

Senior Member
Mar 26, 2021
264
49
I stitched through the SP Flash Tool Android11 V05 Updates by air are not available to me at all.

I can update to V11 only through the SP Flash Tool
.

Seems like updates to Russia are blocked. However. For flashing GSI, V11 is more than enough.
Hundreds of people have already done this and written to me afterwards. But a little unsure why you have such big problems with this ?. Your phone is exactly the same with hardware and drivers as the others. I suspect it's something you missing during the process of flashing.

Flash V11 and Unlock the boot loader, put your phone in Fastboot mode and open Android Install folder.

Unzip this file and put it in to the Install folder and run it.

Code:
fastboot flashing unlock
fastboot flashing unlock_critical
fastboot flash recovery recovery.img
fastboot --disable-verification flash boot boot.img
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot -w
fastboot erase system
fastboot delete-logical-partition product
fastboot --disable-verity --disable-verification flash system GSI.img
fastboot reboot bootloader
fastboot --disable-verification flash boot boot2.img
fastboot flash vbmeta meta.img
fastboot flash recovery recovery2.img
fastboot reboot
.
 

Attachments

  • AA - Install Android.bat.zip
    415 bytes · Views: 5

alexshestakov

Member
Mar 25, 2017
11
0
Motorola Defy (2021)
.

Seems like updates to Russia are blocked. However. For flashing GSI, V11 is more than enough.
Hundreds of people have already done this and written to me afterwards. But a little unsure why you have such big problems with this ?. Your phone is exactly the same with hardware and drivers as the others. I suspect it's something you missing during the process of flashing.

Flash V11 and Unlock the boot loader, put your phone in Fastboot mode and open Android Install folder.

Unzip this file and put it in to the Install folder and run it.

Code:
fastboot flashing unlock
fastboot flashing unlock_critical
fastboot flash recovery recovery.img
fastboot --disable-verification flash boot boot.img
fastboot --disable-verification flash vbmeta vbmeta.img
fastboot -w
fastboot erase system
fastboot delete-logical-partition product
fastboot --disable-verity --disable-verification flash system GSI.img
fastboot reboot bootloader
fastboot --disable-verification flash boot boot2.img
fastboot flash vbmeta meta.img
fastboot flash recovery recovery2.img
fastboot reboot
.
I did as you recommended to me, unpacked
and replaced the AA-Install Android file.bat, put the factory unlock and USB debugging sliders, flashed. I started stock firmware V11, but completely without Google junk, and access to the network.
Screenshot_20220625-211318.png
Screenshot_20220625-211337.png
Screenshot_20220625-211401.png
Screenshot_20220625-211423.png

TWRP has been installed on the phone, but it does not mount the system and vendor partitions.

Screenshot_2022-06-25-11-17-58.png


All day I've been experimenting with different firmware on different PCs on WIN7 and WIN10 on one of the laptops, I completely reinstalled windows, put drivers on a clean Windows, and everywhere one outcome is a gray screen, one inscription is alarming when flashing via Install Android ->
Новый точечный рисунок.jpg
 

alexshestakov

Member
Mar 25, 2017
11
0
Motorola Defy (2021)
Perhaps at his first attempt to flash GSI.img, I made a gross mistake and erased something very important when I tried to restore my smartphone. I followed the Format All + Download path in SP Flashtool by installing stock V11.

After that, I had to restore the Imei.

When downgrading the firmware from V11 -> V05 SP, FlashTool also did not allow me to flash in any way other than Format All + Download

How to flash through utilities from the manufacturer, I never figured out ((( today I will view and study this option.
 

SwedishForenger

Senior Member
Mar 26, 2021
264
49
Perhaps at his first attempt to flash GSI.img, I made a gross mistake and erased something very important when I tried to restore my smartphone. I followed the Format All + Download path in SP Flashtool by installing stock V11.

After that, I had to restore the Imei.

When downgrading the firmware from V11 -> V05 SP, FlashTool also did not allow me to flash in any way other than Format All + Download

How to flash through utilities from the manufacturer, I never figured out ((( today I will view and study this option.
.

No. Formatting the flash memory of you phone does not damage the phones critical files or drivers, which are stored on a locked part of the memory. I format and flash the phone in SP flash tool, every time I try a new rom without any problems.

There are 2 versions of Aftersale, the MTK Oukitel software.
I added them to the file you can download below.


Flashing WP5 Pro using Smart Phone Multi-Port down loader tool.

1. Open the software.
2.png

3.png


2. Click on the Scatter File button to chose a file.

4.png


3. Go in to V11 firmware folder and double click on the scatter file.
5.png

6.png


4. Turn off your phone and connect the cable to the phone.
Click 'Scan button in the program and now connect the cable to the computer and let the program detect your phone.4. Click 'Scan button in the program and now connect the cable to the computer and let the program detect your phone.
7.png


5. 'Scan success, Software found your phone. Now disconnect your phone from the cable.
Click 'Start all button. Program will load the firmware in to the software.
8.png

9.png


6. Wen you see the seconds start counting, now you connect your cable back in to your phone, and the flashing begins.

10.png



DONE...

.
 

Attachments

  • Flashing tools.rar
    22.3 MB · Views: 11

Top Liked Posts

  • 1
    Ok.
    Some Features:
    TWRP is installed only after removing the stock recovery - /vendor/ect/recovery.img
    there is a ready-made vendor with encryption disabled and stock recovery removed. Flash via fastbootd
    After installation TWRP , do not forget to format the data using yes
    Later I will give links to the firmware and mod vendor. Be patient......
  • 1
    Ok.
    Some Features:
    TWRP is installed only after removing the stock recovery - /vendor/ect/recovery.img
    there is a ready-made vendor with encryption disabled and stock recovery removed. Flash via fastbootd
    After installation TWRP , do not forget to format the data using yes
    Later I will give links to the firmware and mod vendor. Be patient......
  • 4
    Hi all... Until we get ROOT to this phone.

    I have been using WP5 Pro as my daily driver for 9 months now, and am super happy with it.
    However... After 3 months, the large 8000Ah battery didn't last as long as it should.
    So I opened it up in ADB :
    adb shell 'pm list packages -f' | sed -e 's/.*=//' | sort
    ore
    adb shell pm list packages
    and took a closer look at the pre installed crap on the phone. And I was shocked by all the unnecessary s*it i found. com.mediatek.atmwifimeta : Why is all my Wifi traffic logged and sent to a remote server !!!.

    To you who are interested in removing bloatware on your phone.
    I put together a list of crap you can delete without affecting your daily use of the phone.

    Just Copy & Paste in terminal and restart the phone.

    adb shell pm uninstall -k --user 0 com.ssui.chdmodel adb shell pm uninstall -k --user 0 com.android.companiondevicemanager adb shell pm uninstall -k --user 0 com.android.dynsystem adb shell pm uninstall -k --user 0 com.android.wallpaper.livepicker adb shell pm uninstall -k --user 0 com.google.android.apps.tachyon adb shell pm uninstall -k --user 0 com.google.android.apps.docs adb shell pm uninstall -k --user 0 com.google.android.apps.googleassistant adb shell pm uninstall -k --user 0 com.google.android.apps.wellbeing adb shell pm uninstall -k --user 0 com.google.android.apps.youtube.music adb shell pm uninstall -k --user 0 com.elephanttek.faceunlock adb shell pm uninstall -k --user 0 com.android.emergency adb shell pm uninstall -k --user 0 com.android.nfc adb shell pm uninstall -k --user 0 com.elephanttek.faceunlock adb shell pm uninstall -k --user 0 com.adups.privacypolicy adb shell pm uninstall -k --user 0 com.android.backupconfirm adb shell pm uninstall -k --user 0 com.adups.fota adb shell pm uninstall -k --user 0 com.android.bips adb shell pm uninstall -k --user 0 com.android.cts.ctsshim adb shell pm uninstall -k --user 0 com.android.cts.priv.ctsshim adb shell pm uninstall -k --user 0 com.android.localtransport adb shell pm uninstall -k --user 0 com.android.partnerbrowsercustomizations.example adb shell pm uninstall -k --user 0 com.android.printspooler adb shell pm uninstall -k --user 0 com.android.sharedstoragebackup adb shell pm uninstall -k --user 0 com.android.wallpaperbackup adb shell pm uninstall -k --user 0 com.debug.loggerui adb shell pm uninstall -k --user 0 com.android.traceur adb shell pm uninstall -k --user 0 com.android.htmlviewer adb shell pm uninstall -k --user 0 com.google.android.apps.restore adb shell pm uninstall -k --user 0 com.google.android.apps.restore adb shell pm uninstall -k --user 0 com.google.android.feedback adb shell pm uninstall -k --user 0 com.google.android.onetimeinitializer adb shell pm uninstall -k --user 0 com.google.android.gms.location.history adb shell pm uninstall -k --user 0 com.google.android.videos adb shell pm uninstall -k --user 0 com.mediatek.atmwifimeta adb shell pm uninstall -k --user 0 com.android.calllogbackup adb shell pm uninstall -k --user 0 com.ssui.setupwizard adb shell pm uninstall -k --user 0 com.ssui.sos

    You can Reinstall one or all apps again by putting:
    adb shell cmd package install-existing com.app name

    With USB Debugging enabled on your phone.....
    There is a lot to copy and paste, so I created a script that cleans your phone in 10 seconds from all this bloatware. Download it at the bottom of this post to your desktop, unzip it to your desktop, connect phone and double-click the Claning file.


    The default launcher on this phone is terrible. Here is a good alternative...
    Using Mod SMART LAUNCHER 5 PRO
    You can download it here: here.... here.... ore here..... just incase here too......

    photo_2021-03-26_04-47-14.jpgphoto_2021-03-26_04-47-19.jpgphoto_2021-03-26_04-48-57.jpg

    2.png
    3

    SOLUTION: DISSAPPEARING NOTIFICATIONS AFTER APPS UPDATES THROUGH THE GOOGLE STORE


    I do not understand what was the reason to make such a ****ty software by Oukitel, but finally i found a way to fix this. It was so annoying, when You have to check if notifications settings are all right every few days.

    Quick tutorial:
    1. You need root privileges. Installing Magisk was described some many times that i will skip this part.
    2. You need list of packages names for the apps, where You want to keep notifications settings all the time. You can obtain it for example through the shell:
    adb shell "pm list packages|cut -f 2 -d ":""
    You can also use some 3rd party app manager, which shows installed package names or check it via Google store. It does not matter.
    3. Now it is time to pull & edit /data/system/ssui_notification file.
    This is content of my ssui_notification:
    {packageName='com.ssui.keyguard', mainSwitch=1, lockScreenSwitch=0, showDetailSwitch=0, handsupSwitch=0, cornerSwitch=2, userOptSwitch=1, listType=1, status=1, userOperated=0}
    {packageName='com.ssui.launcher3', mainSwitch=0, lockScreenSwitch=0, showDetailSwitch=0, handsupSwitch=0, cornerSwitch=2, userOptSwitch=1, listType=1, status=1, userOperated=0}
    {packageName='com.android.music', mainSwitch=1, lockScreenSwitch=0, showDetailSwitch=0, handsupSwitch=0, cornerSwitch=1, userOptSwitch=1, listType=1, status=1, userOperated=0}
    *
    *
    *
    {packageName='com.twitter.android', mainSwitch=1, lockScreenSwitch=0, showDetailSwitch=0, handsupSwitch=1, cornerSwitch=1, userOptSwitch=1, listType=1, status=1, userOperated=0}
    {packageName='com.android.email', mainSwitch=1, lockScreenSwitch=0, showDetailSwitch=0, handsupSwitch=1, cornerSwitch=1, userOptSwitch=1, listType=1, status=1, userOperated=0}
    {packageName='com.linkedin.android', mainSwitch=1, lockScreenSwitch=0, showDetailSwitch=0, handsupSwitch=1, cornerSwitch=1, userOptSwitch=1, listType=1, status=1, userOperated=0}

    All You have to do is copy one line for example:
    {packageName='com.facebook.orca', mainSwitch=1, lockScreenSwitch=0, showDetailSwitch=0, handsupSwitch=1, cornerSwitch=1, userOptSwitch=1, listType=1, status=1, userOperated=0}
    and past it on the bottom with changed package name:
    {packageName='YOUR.APP.PACKAGE.NAME', mainSwitch=1, lockScreenSwitch=0, showDetailSwitch=0, handsupSwitch=1, cornerSwitch=1, userOptSwitch=1, listType=1, status=1, userOperated=0}
    This is example for Signal messenger:
    {packageName='org.thoughtcrime.securesms', mainSwitch=1, lockScreenSwitch=0, showDetailSwitch=0, handsupSwitch=1, cornerSwitch=1, userOptSwitch=1, listType=1, status=1, userOperated=0}
    Repeat this for all apps with disappearing notifications and save the file.
    4. After that You have to overwrite stock ssui_notification with just modified file. If You can not do this because of permission denied error, try to first delete stock file and after that copy modified file to the /data/system. It works for me.
    5. Reboot your phone*
    * I do not know if it is necessary step, but i did it to make sure that it will work.

    Voila, your notifications should not disappear anymore after apps update. I have checked it on few apps and so far it works!

    Unfortunately, this is not the best solution and You have to repeat this procedure after installing new apps, but probably most of people do not install new apps very often. I think it will be not a problem to make easy script to add automatically every installed app to the ssui_notification file, but the best solution will be if we will find which exactly process is responsible for this and just kill it. Maybe somebody will find that.

    I hope that it will be helpful for the rest of frustrated Oukitel users ;) Good Luck!
    3
    Ok.
    You need the latest stock firmware (v15) with unlocked bootloader. Install all drivers.
    To unlock bootloader you need to do this:
    1. In setting - About Phone - tap several times on Build number (developer options)
    2. In Satting - System - Developer options set OEM unlocking and USB debbuging.
    Reboot to bootloader -Vol UP+ Power and select fastboot (Vol Up- select, Vol Down -confirmation)
    In platform-tools ( I copyed cmd.exe to this folder)
    Code:
    fastboot flashing unlock
    Code:
    fastboot flashing unlock_critical
    (Every time you need confirm with Vol UP)
    !WARNING! All data will be lost.
    Reboot to system.
    Repeat steps 1 and 2.
    Then we install GSI (with TWRP or without).
    Boot.img must be from stock firmware.
    You must have vbmetaAndroidSC_mod.img and Havoc-OS-v3.12-20201230-Official-GApps-arm64-ab.img in platform-tool folder.
    Link for Havos 3.12 - https://sourceforge.net/projects/havoc-os/files/arm64-ab/ ( second with Gapps). Extract img from zip.
    Reboot to fastboot.
    In fastboot mode
    Code:
    fastboot --disable-verification flash vbmeta vbmetaAndroidSC_mod.img
    Code:
    fastboot -w
    Reboot to fastbootd
    Code:
    fastboot reboot fastboot
    In fastbootd
    Code:
    fastboot erase system
    Code:
    fastboot delete-logical-partition product
    Code:
    fastboot --disable-verity --disable-verification flash system Havoc-OS-v3.12-20201230-Official-GApps-arm64-ab.img
    Code:
    fastboot -w
    Return to normal fastboot
    Code:
    fastboot reboot bootloader
    In fastboot
    Code:
    fastboot erase userdata
    Code:
    fastboot reboot

    The system will boot in a few minutes
    But your phone won't have a Googl Play certificate.
    To fix this problem I did this:
    Install Magisk-v23.0.apk (disabled Check Updates and in Update Chanel set Custom Channel)
    Reflash boot.img to magisk_patched_boot.img by @xmucio
    In fastboot
    Code:
    fastboot flash boot magisk_patched_boot.img
    Code:
    fastboot --disable-verification flash vbmeta vbmetaAndroidSC_mod.img
    In Magisk set MagiskHide.
    From Magisk repository I installed Riru, BusyBox, MagiskHide Props Config and manualy SafetyNet Fix 2.1.1 (via Install from storage). Then I dissabled all Googl apps (Play market and so on).
    With help from MagiskHide Props Config I made a substitution of the phone and installed the certificate.
    In Termix I done this:
    Code:
    su
    Code:
    props
    You will seen like on picture.
    At first I done 2 (Forse BASIC key attestation)
    2
    d - (pick value from device list)
    3 - (Ulefone, becouse I have it)
    All confirmed.
    Then I done 1 (Edit device fingerprint
    1
    f
    3 - Ulefone
    Then enabled Google apps
    SafetyNet passed. The device is certified.
    2
    Runing on old Android 10?

    WP5 pro are being shipped with Android 10 V3 and V4 version of the firmware.
    However, ther is a new release of Android 10 V5 available for this phone!.

    Android 10 V5 can be downloaded here

    And all the tools needed to make the upgrade possible, you can find it here
    If you are wondering if it is difficult to do the update, you can watch a video on how to do it in this tool folder to.

    photo_2021-04-02_13-28-28.jpg
    2
    OUKITEL IMEI recovery
    1,1.jpg
    Had trouble making calls after flashing the Oukitel firmware to the phone.
    and daild *#06# and discovered that I had lost my IMEI number, which is used to register my phone on the carrier network. Without an IMEI number, you can either call, text or surf the internet. So it's crucial that you restore that number. Here is a small guide on how to reset your IMEI number on ALL smart phones, As long as you have USB drivers for that specific phon.
    I will use Windows 10 in this example, as this is the most common operating system to date. If linux users want a guide too, send me a pm.
    Ok, that out of the way, let's begin....

    Drivers...
    Is the key component for your phone to communicate with a computer, and for communicating with the different chipsets in your phone.

    Oukitel uses Mediatek drivers and can be downloaded here..…
    Extract the folder to your desktop. You will need a copy of the OUKITEL firmware.

    Oukitel WP5 here... and Oukitel WP5 pro here...


    Right click on windows taskbar icon, and click on Device manager.

    1.png


    Click on Action and on Add legacy hardware.
    2.png


    Click on install ....
    3.png


    Click on Brows...
    5.png

    Go in to the Mediatek folder you downloaded earlier and double-click on the android driver.
    You can do this for one or all the drivers, and the drivers in the 64 folder to.
    Reboot the computer....

    Now it's time to fix the missing IMEI number issue....
    To make this job as easy as possible for us, we will use the SN Write Tool.
    There are a lot of versions and editions of this tool for different phones, but for WP5 and WP5 pro we use v1-1924 which can be downloaded here ....
    Ok, let's begin....

    Open the SN_Write_Tool_v1.2020.00 folder and open the SN_Writ program.
    6.png


    Click on System Config.
    0Ww25wWsuT.png


    Onely IMEI and Dule IMEI is checkt.
    Now we need to tell the program to retrieve all the necessary information about your phone from the firmware databases. Now click on the MD1_DB button, and go in to the download OUKITEL firmware folder and in to the database folder.

    7.png

    8.png


    Double click on the MDDB file. Go to the next button AP_DB and add the next database file APDB file. Click the SAVE button.
    9.png


    Now we are ready to write the IMEI number to the phone. Click on the STRT button.
    Now enter your IMEI number. If you have not written it down, you can find it on the packaging the phone came with. Turn off your phone and prepare the USB-c cable.
    11.png


    Ckick OK button , and plug the USB cable into the computer and phone and wait a few seconds. A small text is displayed on the phone screen at the bottom left.
    12.jpg


    The program will verify with the database, before writing the IMEI number to the phone, This may take up to 1 min. If the program finds errors in your IMEI number, you will receive an error message. you can check your number or click OK.
    13.png


    When everything is ready, you will get a green light from the program.
    14.png


    Restart the phone and you now have a new IMEI numbers.....
    1,2.jpg