No, I don't know about that. I never need to craft my phone software. I need it now, due to only one reason, prevent my phone to killing background apps after 30mins. Still believe that vendor will fix it.
Question Oukitel WP5 Pro
- Thread starter aviplokos84
- Start date
What version of the OS do you have?
V3 V4 V5 ?
If V3 ... you can root yor system by the guide for WP5 ....
.
Last edited:
I wrote it few times before. Android 10 (oukitel V5). Phone in Czech has been distributed with V6, but I has been hope that installing vendor official one (V5) will solve my issue, but not. Currently have open ticket to local vendor to get V6 software back (for testing purpose, for all of you - it makes touch screen more accurate).
No...sorry, have no solution for you.
However you can learn how to use AVBtools, and by now be rooted and stop asking questions... and posting solutions instead...
You keep saying V6 ... ?
When version 5 is under development... ?
And my phone direct from the factory have V4.
How can you then have V6 on your phone?
Last edited:
I know how to use ABD, but there is no root solution, as you tested with TWRP and Magisk. If vendor will not solve my issue, it is time to get reffung, or get another pohone and wait for solution.
Please RME help...
Here you have my entire TWRP project and keyes.
Google Drive: Sign-in
Access Google Drive with a Google account (for personal use) or Google Workspace account (for business use).
drive.google.com
Last edited:
AVBTools did not provide solution, at-least as I know. If you know how to do that, just post guide. Wrong step may kill the phone, no one want this.
????? It's called trial and error for a reason !!
you don't demand a solution from a community!!
You participate and develop it....
.
Last edited:
I visit this community, explain my issue and hope that someone is on the same and have solution. Currently seem not. I will wait, and also vendor working on it - if vendor give me solution, I will share it for all.
For system root Using AVBtool.
Learn using AVBtool here:
forum.hovatek.com
forum.hovatek.com
forum.hovatek.com
forum.hovatek.com
Create and Port TWRP...
www.droidwin.com
cd@cd:~/Desktop/avbtool$ python3 avbtool.py info_image --image vbmeta.img
Minimum libavb version: 1.0
Header Block: 256 bytes
Authentication Block: 320 bytes
Auxiliary Block: 3264 bytes
Public key (sha1): cdbb77177f731920bbe0a0f94f84d9038ae0617d
Algorithm: SHA256_RSA2048
Rollback Index: 0
Flags: 0
Rollback Index Location: 0
Release String: 'avbtool 1.1.0'
Descriptors:
Chain Partition descriptor:
Partition Name: recovery
Rollback Index Location: 1
Public key (sha1): 0aa0987116fc792f36bc909b0a4d530413f02a54
Chain Partition descriptor:
Partition Name: vbmeta_system
Rollback Index Location: 2
Public key (sha1): fa41159a5d696abdef93176a07d0b0d001263f01
Chain Partition descriptor:
Partition Name: vbmeta_vendor
Rollback Index Location: 4
Public key (sha1): 9577bc6c0772975ecce93c4d8a178662c728dadf
Chain Partition descriptor:
Partition Name: boot
Rollback Index Location: 3
Public key (sha1): 9d808b0995768d0677fccb1efcddb7cf9e153d99
Hash descriptor:
Image Size: 49776 bytes
Hash Algorithm: sha256
Partition Name: dtbo
Salt: 836908ce5dc44be62c8cee40cff79fb14aef98065e181ab6f909dd7fd2f1e89e
Digest: 9e4eb8d861f2c6b3d0a46c1d524470fbd18a4935b3bbcd72b945e2143c587da5
Flags: 0
Here are all the files you need for this project:
drive.google.com
.
Learn using AVBtool here:
How to create a custom signed vbmeta.img for Unisoc using AVBtool
If you're into rooting and flashing custom recoveries then Android Verified Boot (AVB) or dmverity is something you should be aware of. We'd dropped a blog post on why dmverity could be causing your p
forum.hovatek.com
How to use Magisk Manager & boot.img to root Android
In this tutorial, we are going to show how one can root an Android device by patching the stock boot.img using Magisk Manager. This comes in particularly handy for those on Lollipop and above where on
forum.hovatek.com
How to use AVBtool and a private key to sign a Unisoc (SPD) image
This guide will explain how to sign Unisoc / Spreadtrum (SPD) images (e.g boot, recovery etc) using a private key and AVBtool. This guide is ideal for those with vbmeta-sign.img in their firmware as s
forum.hovatek.com
Help to create a custom signed vbmeta
Hello, sorry for my bad English I've created my vbmeta but when I going to flash I stuck at ''writing in fastboot'' I have followed these steps: - I have verified the content of my vbmeta image: And I
forum.hovatek.com
How to Create and Port TWRP Recovery to any Android Device
In this tutorial, we will show you detailed steps to create and port TWRP Recovery for any Android Device using Android Image Kitchen tool.
cd@cd:~/Desktop/avbtool$ python3 avbtool.py info_image --image vbmeta.img
Minimum libavb version: 1.0
Header Block: 256 bytes
Authentication Block: 320 bytes
Auxiliary Block: 3264 bytes
Public key (sha1): cdbb77177f731920bbe0a0f94f84d9038ae0617d
Algorithm: SHA256_RSA2048
Rollback Index: 0
Flags: 0
Rollback Index Location: 0
Release String: 'avbtool 1.1.0'
Descriptors:
Chain Partition descriptor:
Partition Name: recovery
Rollback Index Location: 1
Public key (sha1): 0aa0987116fc792f36bc909b0a4d530413f02a54
Chain Partition descriptor:
Partition Name: vbmeta_system
Rollback Index Location: 2
Public key (sha1): fa41159a5d696abdef93176a07d0b0d001263f01
Chain Partition descriptor:
Partition Name: vbmeta_vendor
Rollback Index Location: 4
Public key (sha1): 9577bc6c0772975ecce93c4d8a178662c728dadf
Chain Partition descriptor:
Partition Name: boot
Rollback Index Location: 3
Public key (sha1): 9d808b0995768d0677fccb1efcddb7cf9e153d99
Hash descriptor:
Image Size: 49776 bytes
Hash Algorithm: sha256
Partition Name: dtbo
Salt: 836908ce5dc44be62c8cee40cff79fb14aef98065e181ab6f909dd7fd2f1e89e
Digest: 9e4eb8d861f2c6b3d0a46c1d524470fbd18a4935b3bbcd72b945e2143c587da5
Flags: 0
Here are all the files you need for this project:
files - Google Drive
.
Last edited:
Can't ANSWER calls !.
Have detected a problem of "uninstalling" the defult old Contacts and Dialer and installing other on this phone unrooted. When someone calls you, there is no way to answer the call, cost by the Contact and Dialer apps shuting down after 30 minutes.
If you encounter this problem!.
To rectify this, reinstall the old default Contact by ADB this command:
And set the default app for answering your calls to (system default) app in default app menu.
Have detected a problem of "uninstalling" the defult old Contacts and Dialer and installing other on this phone unrooted. When someone calls you, there is no way to answer the call, cost by the Contact and Dialer apps shuting down after 30 minutes.
If you encounter this problem!.
To rectify this, reinstall the old default Contact by ADB this command:
adb shell cmd package install-existing com.android.contactsAnd set the default app for answering your calls to (system default) app in default app menu.
Last edited:
Ok, I have finely managed to get partial root on this phone. Using the latest android 10
OUKITEL_WP5Pro_EEA_V05_20201126_125003 build and latest release.
You can download this here.....
No more shutting down apps after 30 min Etc...
Start by downloading the latest magic manager here....
magiskmanager.com
Download vbmeta.img and boot.img and flash them to your phone... Done
I am currently working on a fix for the Orange state message during boot, coming soon.
Update: Orange state message fixt. Just flash lk-verified.img
OUKITEL_WP5Pro_EEA_V05_20201126_125003 build and latest release.
You can download this here.....
No more shutting down apps after 30 min Etc...
Start by downloading the latest magic manager here....
Downloading Magisk App... | Magisk Manager
The download will automatically start in 5 seconds, please click here to access the download URL directly. If you are confused and want to know how to install the Magisk Manager on your phone you can click here.
magiskmanager.com
Download vbmeta.img and boot.img and flash them to your phone... Done
I am currently working on a fix for the Orange state message during boot, coming soon.
Update: Orange state message fixt. Just flash lk-verified.img
Last edited:
Hello,Ok, I have finely managed to get partial root on this phone. Using the latest android 10
OUKITEL_WP5Pro_EEA_V05_20201126_125003 build and latest release.
You can download this here.....
No more shutting down apps after 30 min Etc...
Start by downloading the latest magic manager here....
Downloading Magisk App... | Magisk Manager
The download will automatically start in 5 seconds, please click here to access the download URL directly. If you are confused and want to know how to install the Magisk Manager on your phone you can click here.
Download vbmeta.img and boot.img and flash them to your phone... Done
I am currently working on a fix for the Orange state message during boot, coming soon.
so I just replace vbmeta.img and boot.img in folder with original firmware files, then flash it? After that install magisk apk, and thats all? What you mean with orange state message during boot? Can be root hidden, I mean i can fully use my phone with banking apps, google play apps etc?.
Mean time I'm in touch with vendor, they are fully aware about 30mins shut down apps problem, they provided some solution using phone manager (built in), but it did not works. Not only wp5 pro is affected, they are preparing new firmware version.
Guide to get partial root... Working on complete system root
This is what I did...
Downloaded the latest Magisc manager from here..... and put the apk file on my SD card.
Using the SP_flash tool you can download here....
DO NOT FORMAT ORE FLASH THE HOLE Android 10 WITH SP_Flash_Tool !!!!!!
Lets partial root the phone ...
Step 1. Turn On your phone.
Step 2. Go in to your settings/My devices/tap build number 7 times and go 1 step back.
Step 3. go down to system/Developer options. turn on OEM unlocking and USB debugging.
Step 4. Turn OFF the phone and wait for 30 seconds
Step 5. Hold down volume+ and power button at the same time, a menu appears, select fastboot, press volume down to confirm.
Open Terminal ore CMD in windows and use the command :
Step 6. In SP tool, unmark all files except vbmeta. Load in my modified vbmeta ....
It is important to flash one file at a time and in the right order. Click the download button and with usb cable connected, press and hold the phones power button until the phone turns off, release the power button and the flashing will start of this vbmeta file.
Step 7. Remove the cable from the phone "DONT START IT" Now we flash my boot image....
Uncheck the vbmeta and check the boot and load in my modified boot image file...
Pres Download button and insert thmodifiede cable to the phone and the flashing start.
Step 8. Remove the cable from the phone "DONT START IT" Now we flash my modified lk file.
This file will remove the Orange State message you get because you have unlocked the bootloader and modified files on the phone. Uncheck the boot and check the lk and lk2 and load my modified lk image. Click Download and insert the usb cable and the flashing will start.
Step 9. Start your phone, Go through the Start guide. Install Magic Manager from your SD card and verify root on your phone. This root will not interfere with banking apps / Netflix or anything else, The root is invisible.
This is what I did...
Downloaded the latest Magisc manager from here..... and put the apk file on my SD card.
Using the SP_flash tool you can download here....
DO NOT FORMAT ORE FLASH THE HOLE Android 10 WITH SP_Flash_Tool !!!!!!
Lets partial root the phone ...
Step 1. Turn On your phone.
Step 2. Go in to your settings/My devices/tap build number 7 times and go 1 step back.
Step 3. go down to system/Developer options. turn on OEM unlocking and USB debugging.
Step 4. Turn OFF the phone and wait for 30 seconds
Step 5. Hold down volume+ and power button at the same time, a menu appears, select fastboot, press volume down to confirm.
Open Terminal ore CMD in windows and use the command :
fastboot flashing unlock Pres volume+ to confirm the bootloader unlocking.Step 6. In SP tool, unmark all files except vbmeta. Load in my modified vbmeta ....
It is important to flash one file at a time and in the right order. Click the download button and with usb cable connected, press and hold the phones power button until the phone turns off, release the power button and the flashing will start of this vbmeta file.
Step 7. Remove the cable from the phone "DONT START IT" Now we flash my boot image....
Uncheck the vbmeta and check the boot and load in my modified boot image file...
Pres Download button and insert thmodifiede cable to the phone and the flashing start.
Step 8. Remove the cable from the phone "DONT START IT" Now we flash my modified lk file.
This file will remove the Orange State message you get because you have unlocked the bootloader and modified files on the phone. Uncheck the boot and check the lk and lk2 and load my modified lk image. Click Download and insert the usb cable and the flashing will start.
Step 9. Start your phone, Go through the Start guide. Install Magic Manager from your SD card and verify root on your phone. This root will not interfere with banking apps / Netflix or anything else, The root is invisible.
Last edited:
For those of you who need a Root Explorer, but are tired of apps from the play store with advertising or don't want to spend a fortune on paid apps which turns out to be crap anyway.
I'll give you my full FX Explorer. Install it on everything you can install apk files on.
I'll give you my full FX Explorer. Install it on everything you can install apk files on.
Last edited:
Please tell me someone else out there also has this issue even after formatting!
I have text at the bottom of the screen saying 'Debugging Mode'.
*Edit* Could it be the scatter file being as my CPU is MT6762D and the downloaded scatter is MT6765?
SwedishForenger, you're doing incredible work!
Attachments
Last edited:
This is what i recognized also.
Scatter file from firmware has 65in name "MT6765_Android_Scatter.txt".
general: MTK_PLATFORM_CFG
info:
- config_version: V1.1.2
platform: MT6765
project: d937d
storage: EMMC
boot_channel: MSDC_0
block_size: 0x20000
My phone reporting MT6762V/WD. So oukitel is ok to provide firmware MT6465 as original for WP5pro.
Does watermak has been displayed after you tried rooting with SwedishForenger guide?
Yes the watermark still remains after following SwedishForenger's guide and I still have the watermark regardless of any other attempt so far.
Last edited:
Debugging Mode .... RED txt
Flashing the latest firmware OUKITEL_WP5Pro_EEA_V05_20201126_125003
Sorry to hear that you have this problem. I have not experienced this, so I decide to try to get my phone to show red txt by flashing the firmware in different programs. And here's what I found.
You can use different flashing programs for boot / recovery / lk / vbmeta etc.
But for full firmware install, the super.img are using the checksum as part of the authentication process. This firmware is tied to a specific flashing tool and CheckSum. flashing it in other tools misses the CheckSum part and the firmware recognizes this and gives a red warning txt.
To flash this firmware and not get red text, use these SP_MDT tools below with the CheckSum file. Try both SP_MDT flashing tools, but do not format before flashing. Flash the firmware back to back until the red text disappears. If I remember correctly, I flashsd with RomVerify_SP_MDT_v3 without any problems.
I put together a small clip that shows how I did it.
If you have formatted the memory on the phone during the flashing process, you probably have also lost your IMEI number. Not a big deal. Just follow my guide to retrieve it.
Restore your IMEI
Don't forget to Root the phone afterword
.
Flashing the latest firmware OUKITEL_WP5Pro_EEA_V05_20201126_125003
Sorry to hear that you have this problem. I have not experienced this, so I decide to try to get my phone to show red txt by flashing the firmware in different programs. And here's what I found.
You can use different flashing programs for boot / recovery / lk / vbmeta etc.
But for full firmware install, the super.img are using the checksum as part of the authentication process. This firmware is tied to a specific flashing tool and CheckSum. flashing it in other tools misses the CheckSum part and the firmware recognizes this and gives a red warning txt.
To flash this firmware and not get red text, use these SP_MDT tools below with the CheckSum file. Try both SP_MDT flashing tools, but do not format before flashing. Flash the firmware back to back until the red text disappears. If I remember correctly, I flashsd with RomVerify_SP_MDT_v3 without any problems.
I put together a small clip that shows how I did it.
If you have formatted the memory on the phone during the flashing process, you probably have also lost your IMEI number. Not a big deal. Just follow my guide to retrieve it.
Restore your IMEI
Don't forget to Root the phone afterword
.
Last edited:
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
6Hi all... Until we get ROOT to this phone.
I have been using WP5 Pro as my daily driver for 9 months now, and am super happy with it.
However... After 3 months, the large 8000Ah battery didn't last as long as it should.
So I opened it up in ADB :
adb shell 'pm list packages -f' | sed -e 's/.*=//' | sort
ore
adb shell pm list packages
and took a closer look at the pre installed crap on the phone. And I was shocked by all the unnecessary s*it i found. com.mediatek.atmwifimeta : Why is all my Wifi traffic logged and sent to a remote server !!!.
To you who are interested in removing bloatware on your phone.
I put together a list of crap you can delete without affecting your daily use of the phone.
Just Copy & Paste in terminal and restart the phone.
adb shell pm uninstall -k --user 0 com.ssui.chdmodel adb shell pm uninstall -k --user 0 com.android.companiondevicemanager adb shell pm uninstall -k --user 0 com.android.dynsystem adb shell pm uninstall -k --user 0 com.android.wallpaper.livepicker adb shell pm uninstall -k --user 0 com.google.android.apps.tachyon adb shell pm uninstall -k --user 0 com.google.android.apps.docs adb shell pm uninstall -k --user 0 com.google.android.apps.googleassistant adb shell pm uninstall -k --user 0 com.google.android.apps.wellbeing adb shell pm uninstall -k --user 0 com.google.android.apps.youtube.music adb shell pm uninstall -k --user 0 com.elephanttek.faceunlock adb shell pm uninstall -k --user 0 com.android.emergency adb shell pm uninstall -k --user 0 com.android.nfc adb shell pm uninstall -k --user 0 com.elephanttek.faceunlock adb shell pm uninstall -k --user 0 com.adups.privacypolicy adb shell pm uninstall -k --user 0 com.android.backupconfirm adb shell pm uninstall -k --user 0 com.adups.fota adb shell pm uninstall -k --user 0 com.android.bips adb shell pm uninstall -k --user 0 com.android.cts.ctsshim adb shell pm uninstall -k --user 0 com.android.cts.priv.ctsshim adb shell pm uninstall -k --user 0 com.android.localtransport adb shell pm uninstall -k --user 0 com.android.partnerbrowsercustomizations.example adb shell pm uninstall -k --user 0 com.android.printspooler adb shell pm uninstall -k --user 0 com.android.sharedstoragebackup adb shell pm uninstall -k --user 0 com.android.wallpaperbackup adb shell pm uninstall -k --user 0 com.debug.loggerui adb shell pm uninstall -k --user 0 com.android.traceur adb shell pm uninstall -k --user 0 com.android.htmlviewer adb shell pm uninstall -k --user 0 com.google.android.apps.restore adb shell pm uninstall -k --user 0 com.google.android.apps.restore adb shell pm uninstall -k --user 0 com.google.android.feedback adb shell pm uninstall -k --user 0 com.google.android.onetimeinitializer adb shell pm uninstall -k --user 0 com.google.android.gms.location.history adb shell pm uninstall -k --user 0 com.google.android.videos adb shell pm uninstall -k --user 0 com.mediatek.atmwifimeta adb shell pm uninstall -k --user 0 com.android.calllogbackup adb shell pm uninstall -k --user 0 com.ssui.setupwizard adb shell pm uninstall -k --user 0 com.ssui.sos
You can Reinstall one or all apps again by putting:
adb shell cmd package install-existing com.app name
With USB Debugging enabled on your phone.....
There is a lot to copy and paste, so I created a script that cleans your phone in 10 seconds from all this bloatware. Download it at the bottom of this post to your desktop, unzip it to your desktop, connect phone and double-click the Claning file.
The default launcher on this phone is terrible. Here is a good alternative...
Using Mod SMART LAUNCHER 5 PRO
You can download it here: here.... here.... ore here..... just incase here too......
3SOLUTION: DISSAPPEARING NOTIFICATIONS AFTER APPS UPDATES THROUGH THE GOOGLE STORE
I do not understand what was the reason to make such a ****ty software by Oukitel, but finally i found a way to fix this. It was so annoying, when You have to check if notifications settings are all right every few days.
Quick tutorial:
1. You need root privileges. Installing Magisk was described some many times that i will skip this part.
2. You need list of packages names for the apps, where You want to keep notifications settings all the time. You can obtain it for example through the shell:
You can also use some 3rd party app manager, which shows installed package names or check it via Google store. It does not matter.
3. Now it is time to pull & edit /data/system/ssui_notification file.
This is content of my ssui_notification:
All You have to do is copy one line for example:
and past it on the bottom with changed package name:
This is example for Signal messenger:
Repeat this for all apps with disappearing notifications and save the file.
4. After that You have to overwrite stock ssui_notification with just modified file. If You can not do this because of permission denied error, try to first delete stock file and after that copy modified file to the /data/system. It works for me.
5. Reboot your phone*
* I do not know if it is necessary step, but i did it to make sure that it will work.
Voila, your notifications should not disappear anymore after apps update. I have checked it on few apps and so far it works!
Unfortunately, this is not the best solution and You have to repeat this procedure after installing new apps, but probably most of people do not install new apps very often. I think it will be not a problem to make easy script to add automatically every installed app to the ssui_notification file, but the best solution will be if we will find which exactly process is responsible for this and just kill it. Maybe somebody will find that.
I hope that it will be helpful for the rest of frustrated Oukitel users
Good Luck!3Ok.
You need the latest stock firmware (v15) with unlocked bootloader. Install all drivers.
To unlock bootloader you need to do this:
1. In setting - About Phone - tap several times on Build number (developer options)
2. In Satting - System - Developer options set OEM unlocking and USB debbuging.
Reboot to bootloader -Vol UP+ Power and select fastboot (Vol Up- select, Vol Down -confirmation)
In platform-tools ( I copyed cmd.exe to this folder)
Code:fastboot flashing unlock(Every time you need confirm with Vol UP)Code:fastboot flashing unlock_critical
!WARNING! All data will be lost.
Reboot to system.
Repeat steps 1 and 2.
Then we install GSI (with TWRP or without).
Boot.img must be from stock firmware.
You must have vbmetaAndroidSC_mod.img and Havoc-OS-v3.12-20201230-Official-GApps-arm64-ab.img in platform-tool folder.
Link for Havos 3.12 - https://sourceforge.net/projects/havoc-os/files/arm64-ab/ ( second with Gapps). Extract img from zip.
Reboot to fastboot.
In fastboot mode
Code:fastboot --disable-verification flash vbmeta vbmetaAndroidSC_mod.imgReboot to fastbootdCode:fastboot -w
In fastbootdCode:fastboot reboot fastboot
Code:fastboot erase systemCode:fastboot delete-logical-partition productCode:fastboot --disable-verity --disable-verification flash system Havoc-OS-v3.12-20201230-Official-GApps-arm64-ab.imgReturn to normal fastbootCode:fastboot -w
In fastbootCode:fastboot reboot bootloader
Code:fastboot erase userdataCode:fastboot reboot
The system will boot in a few minutes
But your phone won't have a Googl Play certificate.
To fix this problem I did this:
Install Magisk-v23.0.apk (disabled Check Updates and in Update Chanel set Custom Channel)
Reflash boot.img to magisk_patched_boot.img by @xmucio
In fastboot
Code:fastboot flash boot magisk_patched_boot.imgIn Magisk set MagiskHide.Code:fastboot --disable-verification flash vbmeta vbmetaAndroidSC_mod.img
From Magisk repository I installed Riru, BusyBox, MagiskHide Props Config and manualy SafetyNet Fix 2.1.1 (via Install from storage). Then I dissabled all Googl apps (Play market and so on).
With help from MagiskHide Props Config I made a substitution of the phone and installed the certificate.
In Termix I done this:
Code:suYou will seen like on picture.Code:props
At first I done 2 (Forse BASIC key attestation)
2
d - (pick value from device list)
3 - (Ulefone, becouse I have it)
All confirmed.
Then I done 1 (Edit device fingerprint
1
f
3 - Ulefone
Then enabled Google apps
SafetyNet passed. The device is certified.2OUKITEL IMEI recovery
Had trouble making calls after flashing the Oukitel firmware to the phone.
and daild *#06# and discovered that I had lost my IMEI number, which is used to register my phone on the carrier network. Without an IMEI number, you can either call, text or surf the internet. So it's crucial that you restore that number. Here is a small guide on how to reset your IMEI number on ALL smart phones, As long as you have USB drivers for that specific phon.
I will use Windows 10 in this example, as this is the most common operating system to date. If linux users want a guide too, send me a pm.
Ok, that out of the way, let's begin....
Drivers...
Is the key component for your phone to communicate with a computer, and for communicating with the different chipsets in your phone.
Oukitel uses Mediatek drivers and can be downloaded here..…
Extract the folder to your desktop. You will need a copy of the OUKITEL firmware.
Oukitel WP5 here... and Oukitel WP5 pro here...
Right click on windows taskbar icon, and click on Device manager.
Go in to the Mediatek folder you downloaded earlier and double-click on the android driver.
Click on Action and on Add legacy hardware.
Click on install ....
Click on Brows...
You can do this for one or all the drivers, and the drivers in the 64 folder to.
Reboot the computer....
Now it's time to fix the missing IMEI number issue....
To make this job as easy as possible for us, we will use the SN Write Tool.
There are a lot of versions and editions of this tool for different phones, but for WP5 and WP5 pro we use v1-1924 which can be downloaded here ....
Ok, let's begin....
Open the SN_Write_Tool_v1.2020.00 folder and open the SN_Writ program.
Click on System Config.
Onely IMEI and Dule IMEI is checkt.
Now we need to tell the program to retrieve all the necessary information about your phone from the firmware databases. Now click on the MD1_DB button, and go in to the download OUKITEL firmware folder and in to the database folder.
Double click on the MDDB file. Go to the next button AP_DB and add the next database file APDB file. Click the SAVE button.
Now we are ready to write the IMEI number to the phone. Click on the STRT button.
Now enter your IMEI number. If you have not written it down, you can find it on the packaging the phone came with. Turn off your phone and prepare the USB-c cable.
Ckick OK button , and plug the USB cable into the computer and phone and wait a few seconds. A small text is displayed on the phone screen at the bottom left.
The program will verify with the database, before writing the IMEI number to the phone, This may take up to 1 min. If the program finds errors in your IMEI number, you will receive an error message. you can check your number or click OK.
When everything is ready, you will get a green light from the program.
Restart the phone and you now have a new IMEI numbers.....
2Runing on old Android 10?
WP5 pro are being shipped with Android 10 V3 and V4 version of the firmware.
However, ther is a new release of Android 10 V5 available for this phone!.
Android 10 V5 can be downloaded here
1.41 GB file on MEGA
mega.nz
And all the tools needed to make the upgrade possible, you can find it here
If you are wondering if it is difficult to do the update, you can watch a video on how to do it in this tool folder to.
