[OVERCLOCK] GPU overclocking | Upgrade your Red Magic 3 to Red Magic 3s | Unleash the Beast

[never00miss]

Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!!​

i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021.
Goals : for overclock and unleash all inside the beast in my new secondhand red magic 3

Note : I am using Macbook to do all of this, and working adb

THIS ACTION WILL IMPACT TO YOUR HARDWARE DEVICE, PLEASE MONITOR YOUR DEVICE TEMPERATURE, AND DO AT YOUR OWN RISK!!!

check adb command with :

adb devices

Step by Step​

1. Flash Global Rom (in my case, is still using global android 9) to China Rom : China Rom
note : using MD5:FB9ABF42A4711962272606E0437AFA12 v5.13

Optional installing GAPPS:​

1.1 if you are using same ROM version as mine, install GAPPS with NIKGAPPS and put nikgapps.config to root /
1.2 run command

adb push nikgapps.config /
adb push NikGapps-core-arm64-11-20201231-signed.zip  /

1.3 flash with twrp with install > install zip > pick <nikgapps zip>
2. Installing TWRP // for restoring boot.img if disaster happen : TWRP
3. Installing Magisk // for root access : Magisk, After all you have done with above step, do this :
4. Installing Konabess // set frequency GPU : Konabess APK, wanna some research with Konabess? do fork and star the author on Github: github

${FREQ} = move step by step from 650 to 800, [675, 700, 725, 750, 775, 800]. try this : set 650 restart play genshin/Antutu, monitor your temperature. repeat and repeat. youtube tutorial

4.a. open konabess
4.b. pick "EDIT GPU FREQ TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, bus-freq: 11, bus-min: 11, bus-max: 11, need to research more about this
4.c. pick "EDIT GPU VOLT TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, voltage level : NOM_L1, need to research more about this

nb : Please aware of this voltage table, this voltage table is from here, need to re-adjust for our Red Magic 3.

4.d. and then final "Backup old image" > remember your current path for boot.img, if disaster happen, boot to bootloader > recovery, and install <your backup boot.img> with target "boot" partition.
4.e. pick "REPACK AND FLASH NEW IMAGE"

Note: i am using 700Mhz for gaming daily driver, for PUBG and GENSHIN IMPACT "RATA KANAN"

Antutu V9​

- stock rom : 510k
- before OC : 528k
- after OC : 588k

Antutu V8​

- before OC : 431k
- after OC : 482k

Supporting Apps :​

- Kernel auditor // set frequency if not in use
-- my setting for OOM (Out of Memory/Low memory killer is "Aggresive")

Additional Hardware :​

- Black Shark fan Pro // tested well on frequency 850Mhz, NOM_L2

CN ROM Version V5.13 Report​

Works :
- shoulder button
- rotation
- no flicker
- many of them is stable
- sensor : Light, Proximity

Not works :
- sensor : Accelerometer, Magnetometer, Compass, Gyro. // was doin all of things "Wipe all on twrp except system"

 

[Deleted member 11588735]

Works with Poco X3 Pro ? Snapdragon 860 is just 855+ ?

 

[never00miss]

Works with Poco X3 Pro ? Snapdragon 860 is just 855+ ?

Idk bro, I don't have poco X3 pro

It's not recommended do that after someone expert doin that.

On poco X3 pro, you just need to remove cpu throttle to improve stability performance if you don't care about heat issue

 

[Deleted member 11588735]

Idk bro, I don't have poco X3 pro

It's not recommended do that after someone expert doin that.

On poco X3 pro, you just need to remove cpu throttle to improve stability performance if you don't care about heat issue

Thanks for Answer How do you remove it ? Magisk Module or someting else ?

 

[never00miss]

Thanks for Answer How do you remove it ? Magisk Module or someting else ?

yup, you can use magisk module or something, the difference between gaming phone and standard phone is on heat management.
cause on standard android phone that use powerful SOC not designed to minimize heat issue.
so buy gaming phone instead of standard phone cause designed for heat issue. hahaha.

 

[SilentDevGuy]

Have you completed further research on the subject?

 

[never00miss]

Have you completed further research on the subject?

for the deep research, i am not be able to do that cause my work as a programmer and have tight time to do my works.
but i was using 775 mhz for daily use,
and its was stable until this day.

whats the poin you ask that? that i can help you sir? @SilentDevGuy

 

[SilentDevGuy]

for the deep research, i am not be able to do that cause my work as a programmer and have tight time to do my works.
but i was using 775 mhz for daily use,
and its was stable until this day.

whats the poin you ask that? that i can help you sir? @SilentDevGuy

Id like to know the temperature effects. Such as how hot it runs on a heavy load for extended period of time and frame rate results

 

[never00miss]

Id like to know the temperature effects. Such as how hot it runs on a heavy load for extended period of time and frame rate results

750mhz Overclock

PUBG mobile - playing on 3.40 hours result :
- max temp : 78C
- avg temp : 65C
- min temp : 55C
Misc : using external fan

 

[SilentDevGuy]

Thank you so much! How does the temperature spread across components? When at 78c is it uncomfy? I am creating a custom rom for red magic and will implement this gpu overclock

750mhz Overclock

PUBG mobile - playing on 3.40 hours result :
- max temp : 78C
- avg temp : 65C
- min temp : 55C
Misc : using external fans

 

[SilentDevGuy]

Are these battery temps, cpu temps, or gpu temps? How is your nand temperature? It is suppose to be never go past 50c(internal storage/memory)

750mhz Overclock

PUBG mobile - playing on 3.40 hours result :
- max temp : 78C
- avg temp : 65C
- min temp : 55C
Misc : using external fan

 

[Rebinaziz]

Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!!​

i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021.
Goals : for overclock and unleash all inside the beast in my new secondhand red magic 3

Note : I am using Macbook to do all of this, and working adb

THIS ACTION WILL IMPACT TO YOUR HARDWARE DEVICE, PLEASE MONITOR YOUR DEVICE TEMPERATURE, AND DO AT YOUR OWN RISK!!!

check adb command with :

adb devices

Step by Step​

1. Flash Global Rom (in my case, is still using global android 9) to China Rom : China Rom
note : using MD5:FB9ABF42A4711962272606E0437AFA12 v5.13

Optional installing GAPPS:​

1.1 if you are using same ROM version as mine, install GAPPS with NIKGAPPS and put nikgapps.config to root /
1.2 run command

adb push nikgapps.config /
adb push NikGapps-core-arm64-11-20201231-signed.zip  /

1.3 flash with twrp with install > install zip > pick <nikgapps zip>
2. Installing TWRP // for restoring boot.img if disaster happen : TWRP
3. Installing Magisk // for root access : Magisk, After all you have done with above step, do this :
4. Installing Konabess // set frequency GPU : Konabess APK, wanna some research with Konabess? do fork and star the author on Github: github



4.a. open konabess
4.b. pick "EDIT GPU FREQ TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, bus-freq: 11, bus-min: 11, bus-max: 11, need to research more about this
4.c. pick "EDIT GPU VOLT TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, voltage level : NOM_L1, need to research more about this

4.d. and then final "Backup old image" > remember your current path for boot.img, if disaster happen, boot to bootloader > recovery, and install <your backup boot.img> with target "boot" partition.
4.e. pick "REPACK AND FLASH NEW IMAGE"

Antutu V9​

- stock rom : 510k
- before OC : 528k
- after OC : 588k

Antutu V8​

- before OC : 431k
- after OC : 482k

Supporting Apps :​

- Kernel auditor // set frequency if not in use
-- my setting for OOM (Out of Memory/Low memory killer is "Aggresive")

Additional Hardware :​

- Black Shark fan Pro // tested well on frequency 850Mhz, NOM_L2

CN ROM Version V5.13 Report​

so i flashed the latest cn rom and now my gyroscope with other components are not working and then I rolled back to global and it still not working what should I do I am really stuck here please help me it bugges me its been over a week problem after problems accruing I really regret buying this pice of crap

 

[SilentDevGuy]

so i flashed the latest cn rom and now my gyroscope with other components are not working and then I rolled back to global and it still not working what should I do I am really stuck here please help me it bugges me its been over a week problem after problems accruing I really regret buying this pice of crap

Its hard to help with so little information and you cant call something a piece of crap because you broke it. What rom are you on right now?

 

[1366gh]

i have same problem, my sensors not working bro, plz.. help

 

[1366gh]

Before do all of this tutorial, Please keep in mind, that if you are dont have basic on Unix System dont do this!!​

i am buy this device just for gaming only, and i am buy secondhand on 20 April 2021.
Goals : for overclock and unleash all inside the beast in my new secondhand red magic 3

Note : I am using Macbook to do all of this, and working adb

THIS ACTION WILL IMPACT TO YOUR HARDWARE DEVICE, PLEASE MONITOR YOUR DEVICE TEMPERATURE, AND DO AT YOUR OWN RISK!!!

check adb command with :

adb devices

Step by Step​

1. Flash Global Rom (in my case, is still using global android 9) to China Rom : China Rom
note : using MD5:FB9ABF42A4711962272606E0437AFA12 v5.13

Optional installing GAPPS:​

1.1 if you are using same ROM version as mine, install GAPPS with NIKGAPPS and put nikgapps.config to root /
1.2 run command

adb push nikgapps.config /
adb push NikGapps-core-arm64-11-20201231-signed.zip  /

1.3 flash with twrp with install > install zip > pick <nikgapps zip>
2. Installing TWRP // for restoring boot.img if disaster happen : TWRP
3. Installing Magisk // for root access : Magisk, After all you have done with above step, do this :
4. Installing Konabess // set frequency GPU : Konabess APK, wanna some research with Konabess? do fork and star the author on Github: github



4.a. open konabess
4.b. pick "EDIT GPU FREQ TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, bus-freq: 11, bus-min: 11, bus-max: 11, need to research more about this
4.c. pick "EDIT GPU VOLT TABLE", > "ADD NEW" > SET Freq : ${FREQ}Mhz, voltage level : NOM_L1, need to research more about this

4.d. and then final "Backup old image" > remember your current path for boot.img, if disaster happen, boot to bootloader > recovery, and install <your backup boot.img> with target "boot" partition.
4.e. pick "REPACK AND FLASH NEW IMAGE"

Antutu V9​

- stock rom : 510k
- before OC : 528k
- after OC : 588k

Antutu V8​

- before OC : 431k
- after OC : 482k

Supporting Apps :​

- Kernel auditor // set frequency if not in use
-- my setting for OOM (Out of Memory/Low memory killer is "Aggresive")

Additional Hardware :​

- Black Shark fan Pro // tested well on frequency 850Mhz, NOM_L2

CN ROM Version V5.13 Report​

bro plz help , my sensores not working ,

 

[Rebinaziz]

Its hard to help with so little information and you cant call something a piece of crap because you broke it. What rom are you on right now

You are right i was kinda out of my mind but anyways, i flashed it using red magic 3 unbrick tool it flashes the oldest rom which is 1.11 and worked my way to NX629J_ENcommon V1.21 cuz i thought it would fix it but it didn't, and changed a lots of gsi roms and used latest cn rom but that aslo throw me in the hole, and i read some posts here they said that you have ro flash persist.img in twrp (which comes with fastboot rom) and i couldn't find it anywhere and someone said you have to wipe everything and it fixs it but that also didn't work, its been a week and half I've read everything online even other phones having same problem but they alway fix theirs with flashing persist.img and i can't find it in the rom which they provide in their website

 

[never00miss]

Are these battery temps, cpu temps, or gpu temps? How is your nand temperature? It is suppose to be never go past 50c(internal storage/memory)

CPU temps,

And so far so good.

so i flashed the latest cn rom and now my gyroscope with other components are not working and then I rolled back to global and it still not working what should I do I am really stuck here please help me it bugges me its been over a week problem after problems accruing I really regret buying this pice of crap

View attachment 5357549i have same problem, my sensors not working bro, plz.. help

bro plz help , my sensores not working ,

You are right i was kinda out of my mind but anyways, i flashed it using red magic 3 unbrick tool it flashes the oldest rom which is 1.11 and worked my way to NX629J_ENcommon V1.21 cuz i thought it would fix it but it didn't, and changed a lots of gsi roms and used latest cn rom but that aslo throw me in the hole, and i read some posts here they said that you have ro flash persist.img in twrp (which comes with fastboot rom) and i couldn't find it anywhere and someone said you have to wipe everything and it fixs it but that also didn't work, its been a week and half I've read everything online even other phones having same problem but they alway fix theirs with flashing persist.img and i can't find it in the rom which they provide in their website

Do my thread, I am rollback to v3.xx latest, and do all wipe on all partition.

[Guide][Stable] How to clean Install CN ROM + TWRP + ROOT + GAPPS on our Nubia Red Magic 3

Hello guys, welcome again to my thread this thread will be my tutorial too for reminder how to reinstalling my Nubia Red Magic 3 i will tell you how to do step by step guide how to do clean Install : Requirement : - ADB installed, check with...

forum.xda-developers.com

 

[serikar]

i m using red magic 3 on android 11 china rom i m used your
Konabess,,,apk
i m expriance many frequencys