Overclocked to high

[Yriel40k]

Hi,
today I load omapclockkeep and used it. And I set the speed to 300Mhz. But after that the mobile freezes and after reboot it hangs every time and restarts . I dont no what to do.

 

[Yriel40k]

Ok i did with a hard reset. I had to make a compination of pushing buttons while the mobile starts and now it restarts. Here you can see if you want:
hardreset.eu/htc_touch_viva_opal_hard_reset_soft_reset_en.html

 

[Diagrax]

Hi,
today I load omapclockkeep and used it. And I set the speed to 300Mhz. But after that the mobile freezes and after reboot it hangs every time and restarts . I dont no what to do.

Lol on an Omap Device I believe 300Mhz is way to high...

 

[GFX]

Besides, any frequency higher than 216 MHz will introduce the infamous camera bug, which is not solved till now. (i.e. you can't use the camera above 216 MHz)

However, I'm able to run my OMAP @ 240 MHz, and it's stable, but you'll have to deal with a shortened battery life. But the performance increase is WELL worth it!

 

[Diagrax]

Besides, any frequency higher than 216 MHz will introduce the infamous camera bug, which is not solved till now. (i.e. you can't use the camera above 216 MHz)

However, I'm able to run my OMAP @ 240 MHz, and it's stable, but you'll have to deal with a shortened battery life. But the performance increase is WELL worth it!

Well Said my friend.

 

[zuperxtreme]

I recommend Homescreen++, it has an awesome dynamic overclock function called CPU scaler. My phone is running 195 minimum, 273 max and 286 boost.

It'll lower the frequency when it's idle, push it to 286 when it's doing something intensive and then it'll hover around the original 201 and 273 max.

Plus you can add camera.exe to the exception list so it'll clock it to 201 and you won't get any kind of artifacts in your image.