ok this is the guide from Qzytor
http://forum.xda-developers.com/showthread.php?t=725290&page=120
Install NetRippers Msm7kCpuSpeed V.2 App. in your Device -- (I'm using v.1 becouse with v.2 i didn't get above 700mhz)
Install oruam57s SetCpuSpeed v1.0d on SD card.
Take SD card out and soft reset the phone.
Open registry.
Go to HKLM\Software\Msm7kCpuSpeed.
Edit the values as below:
BootTime = 90000 (This is important. This value gives enough time for the
phone to fully boot up. The phone has to fully boot up
before the OC kicks in)
CheckTime = 20 (Stable at 20, otherwise yoyos between base and OCed
cpu speed)
Command = 0
PerfomanceLevel = 35 (This speed is stable for me without SOD)
ScreenOffPerfomanceLevel = 27
SettlingTime = 10
Close Registry editor, insert SD card in the phone and soft reset the phone.
Once the phone has fully boot up, give it a minute before opening NetRippers Msm7kCpuSpeed and you should see your OCed cpu speed.
If your OC cpu speed isnt stable then take your SD card out,soft reset the phone and registry edit PerfomanceLevel to a lower value.
To restore back to phone default speed:
Open File Explorer.
Go to Windows\Startup folder and delete SetCpuSpeed.
Soft reset the phone and phone default speed will be restored.
Before deleting SetCpuSpeed from Windows\Startup folder , save it in Documents folder so if you want to overclock again, copy and paste it from Documents folder to Windows\Startup folder.
SKTools Benchmark at 672 MHz:
Intiger = 416.5933 Moves/25 usec.(At stock speed Intiger = 332.6351)
Floating point = 9.56 MWIPS. (At stock speed Floating point = 7.47 MWIPS)
I haven't tested it but this should also work on SEX1 and Touch Diamond.
OVERCLOCK AT YOUR OWN RISK.
ok thats Qzytor post which is really great and i'm very thankfull for this
this is my setting and i try this on energy and valkyrie rom working on xperia
BootTime = 90000
CheckTime = 20
Command = 0
PerfomanceLevel = 39 (thats 744mhz and it's stabel for me )
ScreenOffPerfomanceLevel = 27
SettlingTime = 10
but i'm using msm7kcpuspped v1 not v2 .....
you don't need to plug in the phone especially when the phone boots up (thats was may first mistake i never wait the phone to fully boot up , and i was allways presing some buttons and that's way my phone was freezing so just wait and you will see for yourself
http://forum.xda-developers.com/showthread.php?t=725290&page=120
Install NetRippers Msm7kCpuSpeed V.2 App. in your Device -- (I'm using v.1 becouse with v.2 i didn't get above 700mhz)
Install oruam57s SetCpuSpeed v1.0d on SD card.
Take SD card out and soft reset the phone.
Open registry.
Go to HKLM\Software\Msm7kCpuSpeed.
Edit the values as below:
BootTime = 90000 (This is important. This value gives enough time for the
phone to fully boot up. The phone has to fully boot up
before the OC kicks in)
CheckTime = 20 (Stable at 20, otherwise yoyos between base and OCed
cpu speed)
Command = 0
PerfomanceLevel = 35 (This speed is stable for me without SOD)
ScreenOffPerfomanceLevel = 27
SettlingTime = 10
Close Registry editor, insert SD card in the phone and soft reset the phone.
Once the phone has fully boot up, give it a minute before opening NetRippers Msm7kCpuSpeed and you should see your OCed cpu speed.
If your OC cpu speed isnt stable then take your SD card out,soft reset the phone and registry edit PerfomanceLevel to a lower value.
To restore back to phone default speed:
Open File Explorer.
Go to Windows\Startup folder and delete SetCpuSpeed.
Soft reset the phone and phone default speed will be restored.
Before deleting SetCpuSpeed from Windows\Startup folder , save it in Documents folder so if you want to overclock again, copy and paste it from Documents folder to Windows\Startup folder.
SKTools Benchmark at 672 MHz:
Intiger = 416.5933 Moves/25 usec.(At stock speed Intiger = 332.6351)
Floating point = 9.56 MWIPS. (At stock speed Floating point = 7.47 MWIPS)
I haven't tested it but this should also work on SEX1 and Touch Diamond.
OVERCLOCK AT YOUR OWN RISK.
ok thats Qzytor post which is really great and i'm very thankfull for this
this is my setting and i try this on energy and valkyrie rom working on xperia
BootTime = 90000
CheckTime = 20
Command = 0
PerfomanceLevel = 39 (thats 744mhz and it's stabel for me )
ScreenOffPerfomanceLevel = 27
SettlingTime = 10
but i'm using msm7kcpuspped v1 not v2 .....
you don't need to plug in the phone especially when the phone boots up (thats was may first mistake i never wait the phone to fully boot up , and i was allways presing some buttons and that's way my phone was freezing so just wait and you will see for yourself
Attachments
Last edited:
