That's for OxygenOS 4.1.1
That should be it. Haven't had the opportunity to test yet as I am on vacation in the North of Portugal with a 500MB 128kbps data connection.
OxygenOS 4.1.3 (7.1.1) OTA for OnePlus 3 (Download Links Mega+ GDrive+ OP OTA Server)
- Thread starter theduke7
- Start date
No. If youre phone does not boot to twrp, after installing the rom, root, twrp. Press & keep pressed power button till the first vibration. Then press vol. down & choose :
1. Bootloader, if you have PC. The best way to flash recovery. After flashing, reboot to Bootloader, then reboot to recovery.
or
2. Recovery. Flash recovery from recovery.
Yeah, that is what I usually do. But what I tried to say is another thing. In most devices, when you install a stock rom from twrp, this is replaced by stock recovery so, before doing reboot system, you have to reinstall twrp from twrp and then, you can reboot system. In this way, you won't lose twrp. However, in oneplus 3, it is different because in spite of twrp seems to be reinstalling after the rom, when you try it, what really remains installed is stock recovery and then, you will have to install TWRP from adb. So, my question was about if there was possible to reinstall twrp from twrp instead of from adb. This is what I couldn't get everytime I changed the room. Of course, I'm speaking about stock roms.
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Last edited:
Hi,
Wipe system will lose twrp and get stock recovery and no root, so you can update:
1/ Wipe cache and dalvik :
Flash rom and su, reboot system
2/ Wipe cache, dalvik and system :
Flash rom, flash twrp, reboot twrp, flash su, reboot system
Yeah, I usually perform the second method you describe, but I do not install Su, but Magisk. In any case, the steps I give are the following ...Hi,
Wipe system will lose twrp and get stock recovery and no root, so you can update:
1/ Wipe cache and dalvik :
Flash rom and su, reboot system
2/ Wipe cache, dalvik and system :
Flash rom, flash twrp, reboot twrp, flash su, reboot system
1.Wipes Davilk, System and Cache
2. Install rom
3. Install TWRP (apparently seems to be installed)
4. Reboot system (twrp has been lost and recovery Stock remains).
5. Restart bootloader and install twrp by Adb.
6. Install Magisk + MagiskSu from Twrp
The question is... Why I'm losing twrp? Am I doing something wrong? I even tried to install Magisk after rom but I couldn't. It gave me error. Any idea..?
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
you need reboot twrp after flash it, see my previous post
Ok. Thanks, mate. Now, I'm not completely sure, but I think I've done that in another occasions without success. Anyway, tomorrow I will install the rom and I will try it in that way. Let's see if there's good luck this time ...you need reboot twrp after flash it, see my previous post
Thank you very much.Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Any one here from OB13 flashed this and tried this 4.1.3?
any better than the openbeta?
any better than the openbeta?
From OB13 to 4.1.3 and an hour later back to OB13, absolutely no advantage for 4.1.3
OB13 seems a little bit faster (touch latency fixed), and has some experimental things (automatic night mode, new launcher..)
Both are stable.
Same here OB13 is the tits!! And has been super stable and good battery for me.
Why not use official TWRP 3.1.0.0? I've been running that on 4.1.1 without issue.
Hi again mate! I have just finished of installing the rom and as I suspected, I couldn't install twrp directly from twrp after the rom. I followed the steps you told me but it didn't work, at least using 3.0.4-1 twrp version and previous ones. I installed the rom, then twrp and then, I rebooted recovery but instead of rebooting twrp, it restarted system. Therefore, I turned off the device and I went into recovery. As I told you yesterday, stock recovery was installed so, I had to reinstall twrp from adb, like always. Well... it doesn't matter. The way you told me is the normal way I have been using with another devices but I could never install twrp from twrp after installing a stock rom in oneplus 3. I can't understand why...you need reboot twrp after flash it, see my previous post
Anyway, thanks you for your help :good:
Hi,Hi again mate! I have just finished of installing the rom and as I suspected, I couldn't install twrp directly from twrp after the rom. I followed the steps you told me but it didn't work, at least using 3.0.4-1 twrp version and previous ones. I installed the rom, then twrp and then, I rebooted recovery but instead of rebooting twrp, it restarted system. Therefore, I turned off the device and I went into recovery. As I told you yesterday, stock recovery was installed so, I had to reinstall twrp from adb, like always. Well... it doesn't matter. The way you told me is the normal way I have been using with another devices but I could never install twrp from twrp after installing a stock rom in oneplus 3. I can't understand why...
Anyway, thanks you for your help :good:
Ok, strange or it's because I'm on eng.stk's twrp.
I switch from OOS to OB and vice versa and it works for me.
Last edited:
Yeah, I think it's due to the official twrp. Maybe I should change it... [emoji57]Hi,
Ok, strange or it's because I'm on eng.stk's twrp.
I switch from OOS to OB and vice versa and it works for me.
Is 3.0.2-0 Blu Spark v11 op3 the last version?
Enviado desde mi ONEPLUS A3003 mediante Tapatalk
Last edited:
Arf, nan!
it's twrp-3.1.0-x_blu_spark_v26-op3_op3t.img here: https://forum.xda-developers.com/devdb/project/?id=15934#downloads
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone