[P-EOL][ROM]LineageOS 11 for I9300

rpdroky · Feb 27, 2018

LineageOS is a free, community built, aftermarket firmware distribution of Android 4.4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.

Code:

#include "std_disclaimer.h"
/*
 * Your warranty is void.
 *
 * I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or you getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at me for messing up your device, I will laugh at you.
 */

LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.

Huuuge thanks to @xpduyson , @TimSchumi and @wolfenders for keeping the security updates up !

----------| HOW TO INSTALL |----------

Clean
- Download ROM
- Download GApps ( optional )
- Reboot in recovery ( TWRP Recommended )
- Wipe --> Advanced Wipe --> Select : Dalvik / ART Cache , Cache , System and Data --> Swipe to Wipe
- Flash ROM
- Flash Gapps ( optional )
- Reboot

Dirty
- Download ROM
- Download GApps ( optional )
- Reboot in recovery ( TWRP Recommended )
- Flash ROM
- Flash Gapps ( optional )
- Reboot

----------| DOWNLOAD ZONE |----------

Latest Version : Here
TWRP_3.1.1-0 flashable zip : here
Open Gapps : here
Problems with EFS/IMEI/No network? here is the thread for you
Problems sending SMS? Check out this thread , PDU encoder is outdated so just scrol down on the warning page , and yes it will work for any ROM not just JB

XDA:DevDB Information
LineageOS 11.0, ROM for the Samsung Galaxy S III I9300

Contributors
rpdroky, LineageOS team

ROM OS Version: 4.4.4 KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: CWM or TWRP recovery
Based On: LineageOS

Version Information
Status: Stable

Created 2016-03-26
Last Updated 2016-06-13

rpdroky · Feb 27, 2018

LINEAGE OS 13.0

Latest Version : Here

yethz · Mar 26, 2016 at 11:47 PM

Any gapps that you can recommend for this build?
really appreciate your time and hardwork for sharing this., thank you..

gonna try this later...

rpdroky · Mar 27, 2016 at 12:18 AM

yethz said:
Any gapps that you can recommend for this build?
really appreciate your time and hardwork for sharing this., thank you..

gonna try this later...

Open GApps Pico , i will add the link to the download section

Cheers :highfive:

xpduyson · Nov 14, 2014 96 70 0

I'm testing this build right now. It have mDNIe, everything look very sharp, but you forgot to add "Advanced Display" on Display and Light setting, so I cant adjust sharpness.

rpdroky · Mar 27, 2016

xpduyson said:
I'm testing this build right now. It have mDNIe, everything look very sharp, but you forgot to add "Advanced Display" on Display and Light setting, so I cant adjust sharpness.

I didn't foget or remove any features from it , i just updated the sources , and if CM team decide to remove something , they must have a reason for it

, and i don't remember that CM12.1 ever had such a feature , not even CM13 has it as i recall , anyway , you coul'd always try a custom kernel like Boeffla-Kernel , arter97 kernel or ArchiKernel (AOSP version) , maybe one of them has yre desired feature

Edit: yes indeed , i checked the old version and yes it had such a option , i'm gonna try to bring it back but i can't promise , sorry

Cheers :highfive:

rp158 · Mar 27, 2016 at 1:31 PM

@xpduyson: you can set mdnie-mode simply by editing /sys/class/mdnie/mode (try 4 for automatic). Smuggling a script into init.d doesn't work for me.

xpduyson · Nov 14, 2014 96 70 0

@rpdroky I'm using Boeffla kernel to control mDNIe. Your ROM working very smooth with boeffla.

anyway, thanks for continue support one of the best stable CM ROM for S3! CM11 look really old and CM13 still in nightly.

wielku · Mar 27, 2016 at 11:07 PM

Thank You for supporting best rom on i9300 but I have a problem, when I try playing .webm files through browser or apps like clover the video doesn't show up and there is only audio I have to go through third party app like MX Player but those videos worked fine on CM12.1 By Trafalgar Square

rpdroky · Mar 28, 2016 at 1:01 AM

wielku said:
Thank You for supporting best rom on i9300 but I have a problem, when I try playing .webm files through browser or apps like clover the video doesn't show up and there is only audio I have to go through third party app like MX Player but those videos worked fine on CM12.1 By Trafalgar Square

Honestly , i don't know why , but i will check it out , thanks for the info

Cheers :highfive:

xpduyson · Mar 28, 2016

wielku said:
Thank You for supporting best rom on i9300 but I have a problem, when I try playing .webm files through browser or apps like clover the video doesn't show up and there is only audio I have to go through third party app like MX Player but those videos worked fine on CM12.1 By Trafalgar Square

when I'm using Trafalgar Square's version, webm video freeze at first frame and no sound, others video format play fine. I assumed that the browser tried to play webm video with hardware accelerated.

Also in @rpdroky version, I can't play any video with HW+ accelerated in MX Player, logcat show something like this:

edit: HW+ was working in Trafalgar Square ROM
edit2: sometime both HW and HW+ not woking, logcat didn't show any error.
edit3: tried VLC, only work with software accelerated, not woking with hardware accelerated

Code:

03-28 07:44:40.000 2010-2432/? E/OMXNodeInstance: getConfig(3d:SEC.AVC.Decoder, ConfigCommonOutputCrop(0x700000f)) ERROR: NotReady(0x80001010)
03-28 07:44:40.000 7287-10934/com.mxtech.videoplayer.ad I/OMXCodec: [OMX.SEC.AVC.Decoder] video dimensions are 1920 x 1080
03-28 07:44:40.000 7287-10934/com.mxtech.videoplayer.ad I/OMXCodec: [OMX.SEC.AVC.Decoder] allocating 5 buffers of size 3133440 on input port
03-28 07:44:40.000 7287-10934/com.mxtech.videoplayer.ad I/OMXCodec: [OMX.SEC.AVC.Decoder] allocated buffer 0x42de2f71 on input port
03-28 07:44:40.000 7287-10934/com.mxtech.videoplayer.ad I/OMXCodec: [OMX.SEC.AVC.Decoder] allocated buffer 0x42de2f72 on input port
03-28 07:44:40.000 7287-10934/com.mxtech.videoplayer.ad I/OMXCodec: [OMX.SEC.AVC.Decoder] allocated buffer 0x42de2f73 on input port
03-28 07:44:40.000 7287-10934/com.mxtech.videoplayer.ad I/OMXCodec: [OMX.SEC.AVC.Decoder] allocated buffer 0x42de2f74 on input port
03-28 07:44:40.000 7287-10934/com.mxtech.videoplayer.ad I/OMXCodec: [OMX.SEC.AVC.Decoder] allocated buffer 0x42de2f75 on input port
03-28 07:44:40.000 7287-10934/com.mxtech.videoplayer.ad I/OMXCodec: [OMX.SEC.AVC.Decoder] OMX-buffers: min=2 actual=2 undeq=1+1
03-28 07:44:40.000 7287-10934/com.mxtech.videoplayer.ad I/OMXCodec: [OMX.SEC.AVC.Decoder] OMX-buffers: min=2 actual=6 undeq=4+1
03-28 07:44:40.000 2001-5201/? D/gralloc: int alloc_device_alloc(alloc_device_t*, int, int, int, int, const native_handle_t**, int*) added usage GRALLOC_USAGE_HW_ION because of format
03-28 07:44:40.000 2001-5201/? D/gralloc: int alloc_device_alloc(alloc_device_t*, int, int, int, int, const native_handle_t**, int*) added usage GRALLOC_USAGE_PRIVATE_NONECACHE because of format
03-28 07:44:40.000 2001-5201/? D/gralloc: int alloc_device_alloc(alloc_device_t*, int, int, int, int, const native_handle_t**, int*) added usage GRALLOC_USAGE_SW_WRITE_OFTEN because of format
03-28 07:44:40.005 7287-10934/com.mxtech.videoplayer.ad E/Surface: dequeueBuffer: IGraphicBufferProducer::requestBuffer failed: -2147483646
03-28 07:44:40.005 7287-10934/com.mxtech.videoplayer.ad E/OMXCodec: dequeueBuffer failed: Unknown error 2147483646 (2147483646)
03-28 07:44:40.005 7287-10934/com.mxtech.videoplayer.ad E/OMXCodec: [OMX.SEC.AVC.Decoder] init failed: -2147483646
03-28 07:44:40.005 7287-9136/com.mxtech.videoplayer.ad E/OMXCodec: [OMX.SEC.AVC.Decoder] OMX_EventError(0x8000101c, 0)
03-28 07:44:40.005 7287-10934/com.mxtech.videoplayer.ad E/MX.Video.Decoder.System: 10934 | Can't start OMX codec. error=-2147483646

neonline78 · Jul 22, 2012 19 6 0

Anyone have problem with GPS? In my friend's s3 all the app that use GPS says "GPS not active".

Inviato dal mio ONE A2003 utilizzando Tapatalk

rpdroky · Mar 28, 2016 at 9:51 AM

New build will come today , most of the stuff shoul'd be fixed so be a little pacient cuz i have limited time

Cheers :highfive:

yethz · Mar 28, 2016

rpdroky said:
Open GApps Pico , i will add the link to the download section

Cheers :highfive:

I thought so

thanks and also, what could possibly be an issue, if I use the gapps 5.1 ( micro )? -
coz gapps (micro) package have google apps I mostly use, so I dont have to re-download some on playstore other than 3rd-party apps..

other than that, feel great for the updates today

rpdroky · Mar 28, 2016

cm-12.1-20160328-UNOFFICIAL-i9300.zip Online

- Advanced Display is back in the Display & lights menu
- webm files and GPS shoul'd work now

Cheers :highfive:

yethz · Mar 28, 2016 at 11:34 AM

rpdroky said:
- Advanced Display is back in the Display & lights menu
- webm files and GPS shoul'd work now
Cheers :highfive:

weeehhh... high five bro

downloading now and the sickness of flashcoholic is running back into my nierves..

Wooohh... English grammar is the hardest part than modding or tweaking an android rom.. lol..

thanks again bro @rpdroky

rpdroky · Mar 28, 2016 at 11:42 AM

yethz said:
I thought so
thanks and also, what could possibly be an issue, if I use the gapps 5.1 ( micro )? -
coz gapps (micro) package have google apps I mostly use, so I dont have to re-download some on playstore other than 3rd-party apps..

other than that, feel great for the updates today

Well you can use any version you like , i just recommended pico version to keep it simple

rpdroky · Mar 28, 2016 at 11:51 AM

yethz said:
weeehhh... high five bro
downloading now and the sickness of flashcoholic is running back into my nierves..

Wooohh... English grammar is the hardest part than modding or tweaking an android rom.. lol..

thanks again bro @rpdroky

Glad to be helpfull

Cheers :highfive:

mamopada · Aug 4, 2015 40 16 0

Nice to see that someone is developing cm12.1 further on
Thanks man

---------- Post added at 11:40 AM ---------- Previous post was at 11:38 AM ----------

Only thing i noticed that nightmode is very laggy was also in cm 13 but they fixed it maybe its possible to do so also in cm12.1

matisek2 · Dec 5, 2015 24 2 0

What about the camera in this rom? somebody knows?

[P-EOL][ROM]LineageOS 11 for I9300

Senior Member

Senior Member

Elite Member

Senior Member

Senior Member

Senior Member

Elite Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Elite Member

Senior Member

Elite Member

Senior Member

Senior Member

Member

Member