I tried various times this method written below
but always got error while installing harspl after jumpspl
plz explain
JumpSPL & HardSPL Instructions:
1.Transfer the extracted files (JumpSPL.exe & Pharos_JumpSPL.nb) to your device and execute.
2.Use 0x10000000 as Jump Address.
3.After getting the Open File Dialog, press [Camera] & [Power] like you are going to enter Boot Loader, then tab on the Pharos_JumpSPL.nb file (Pharos_JumpSPL.nb).
You will get the grey background screen, you can flash any ROM to your device at this point.
In some case, you may need to unplug and then plug the USB cable again.
4.If you wanted to permanently unlock your device, why not, simply flash it with the HardSPL once and you are done.
After HardSPL, you will notice your SPL version change when boot;
From SPL 1.11.0001
To SPL 1.11Mobiz
Recommended:
•To make it easier, I recommend changing Button 3 (Camera) to <None> or the Camera may disturb you.
but always got error while installing harspl after jumpspl
plz explain
JumpSPL & HardSPL Instructions:
1.Transfer the extracted files (JumpSPL.exe & Pharos_JumpSPL.nb) to your device and execute.
2.Use 0x10000000 as Jump Address.
3.After getting the Open File Dialog, press [Camera] & [Power] like you are going to enter Boot Loader, then tab on the Pharos_JumpSPL.nb file (Pharos_JumpSPL.nb).
You will get the grey background screen, you can flash any ROM to your device at this point.
In some case, you may need to unplug and then plug the USB cable again.
4.If you wanted to permanently unlock your device, why not, simply flash it with the HardSPL once and you are done.
After HardSPL, you will notice your SPL version change when boot;
From SPL 1.11.0001
To SPL 1.11Mobiz
Recommended:
•To make it easier, I recommend changing Button 3 (Camera) to <None> or the Camera may disturb you.
