PACEficator Project|Hybrid ROM 2.0.84.0 v2.8 Installer|Stratos & Pace (2021/01/29)

Search This thread

DooshPastesh

Senior Member
Jul 13, 2008
234
59
Gizycko
Hi, I have strange problem. I have two devices paired with iOS. Mi Band 4 and Pace with Paceficator installed few days ago. Both devices are using new Zepp app to sync with phone. Unfortunately, Pace can't sync time as if there is no DST. On Mi Band It's ok. Time is the same as on the phone. At the same time Pace is one hour late. Like now, on Mi Band is 15:16, on iPhone 15:16 and on Pace is 14:16. I've tried almost everything. Factory reset, switching calendars, changing time manually on iPhone (this method works, but then I have wrong time on my phone, +1 hour, but on watch is ok).

How to fix it?
 

Saratoga79

Senior Member
Jan 12, 2013
2,213
2,173
Ordizia Capital
Voice Alerts works in 'Run' activity with mp3 playback but not works in 'Trail Run' (with or without mp3 playback).
Is it possibe to alter this behavior?

Anyway.... what is the difference between the two running modes (counting calories, distance, ...)?
EDIT: I did a small test and HR voice alert worked (playing music) in Trail Run activity but 1 km voice alert did not work. I'm not sure but maybe km alert works every 5 km or something. US language.

So voice alerts don't work for Trail run? Did they work in older ROM versions?
I'm afraid there is nothing to do with that.
 
Last edited:

DooshPastesh

Senior Member
Jul 13, 2008
234
59
Gizycko
Hey @Saratoga79, I have restored to default firmware with your STOCKfied rom and now the time is synchronized correctly. However, I would like to use PACEficator rom. Is there any chance to fix time difference or find the culprit?
 

DooshPastesh

Senior Member
Jul 13, 2008
234
59
Gizycko
Ok, so I've made some tests.
First of all, I've flashed 3 different roms and paired it with iOS and one with Android.
PACEficator + iOS = wrong time
PACEficator + Android = ok
STOCKified + iOS = ok
Custom rom (Polish, based on Pace firmware) + iOS = ok

I'm assuming that there's something wrong with connection between iOS Zepp app, because your rom synchronize time with Android properly. But, there's a question, why other roms works good with iOS and sync time accurately?
 

lorenplak

Member
May 14, 2018
15
1
Ok, so I've made some tests.
First of all, I've flashed 3 different roms and paired it with iOS and one with Android.
PACEficator + iOS = wrong time
PACEficator + Android = ok
STOCKified + iOS = ok
Custom rom (Polish, based on Pace firmware) + iOS = ok

I'm assuming that there's something wrong with connection between iOS Zepp app, because your rom synchronize time with Android properly. But, there's a question, why other roms works good with iOS and sync time accurately?
Hello,

i've the same problem with the lastest PACIficator and IOs : wrong time : 1 hour less.
i'm from france.

regards,
Laurent
 

Saratoga79

Senior Member
Jan 12, 2013
2,213
2,173
Ordizia Capital
Ok, so I've made some tests.
First of all, I've flashed 3 different roms and paired it with iOS and one with Android.
PACEficator + iOS = wrong time
PACEficator + Android = ok
STOCKified + iOS = ok
Custom rom (Polish, based on Pace firmware) + iOS = ok

I'm assuming that there's something wrong with connection between iOS Zepp app, because your rom synchronize time with Android properly. But, there's a question, why other roms works good with iOS and sync time accurately?
Hello,

i've the same problem with the lastest PACIficator and IOs : wrong time : 1 hour less.
i'm from france.

regards,
Laurent
Good question... Maybe there is some issue with iOS and timezone/DST...

You can try changing timezone in your watch.
You can get current timezone with:
Code:
adb shell getprop persist.sys.timezone
And to set a new timezone:
GMT+2
Code:
adb shell setprop persist.sys.timezone Europe/Berlin
adb reboot
But probably you may need:
GMT+3
Code:
adb shell setprop persist.sys.timezone Europe/Kiev
adb reboot
Timezone will probably revert after you sync data in Zepp and/or if you reboot the watch.
 
Last edited:

DooshPastesh

Senior Member
Jul 13, 2008
234
59
Gizycko
That's odd! Mine was set to Africa/Algiers. After changing to Europe/Warsaw the time is ok, first sync didn't changed back to Africa.
Unfortunately, there's another problem. It is really hard to sync watch with phone. Profile tab in Zepp shows watch as connected, but swiping down on first tab in app hardly syncs (I did maybe 6-7 attempts). Finally, it synced, but app shows 1447 steps, when I did only 499...

And another one, I have real problem with finding GPS signal.
 
Last edited:

Saratoga79

Senior Member
Jan 12, 2013
2,213
2,173
Ordizia Capital
That's odd! Mine was set to Africa/Algiers. After changing to Europe/Warsaw the time is ok, first sync didn't changed back to Africa.
Unfortunately, there's another problem. It is really hard to sync watch with phone. Profile tab in Zepp shows watch as connected, but swiping down on first tab in app hardly syncs (I did maybe 6-7 attempts). Finally, it synced, but app shows 1447 steps, when I did only 499...

And another one, I have real problem with finding GPS signal.
My Stratos 3 is set to Africa/xxx but it is a GMT+2 timezone so time is fine, your time was GMT+1.
Zepp sync issues are very common, at least in Android, not sure in iOS.
Did you try an older ROM version? Maybe is something related to this ROM version + Pace + iOS, I don't know if this happens with Stratos too.
 

lorenplak

Member
May 14, 2018
15
1
That's odd! Mine was set to Africa/Algiers. After changing to Europe/Warsaw the time is ok, first sync didn't changed back to Africa.
Unfortunately, there's another problem. It is really hard to sync watch with phone. Profile tab in Zepp shows watch as connected, but swiping down on first tab in app hardly syncs (I did maybe 6-7 attempts). Finally, it synced, but app shows 1447 steps, when I did only 499...

And another one, I have real problem with finding GPS signal.

hello,

mine was set to Africa/Algiers too !
no more issue after putitng Europe/Berlin.

Laurent
 
  • Like
Reactions: Saratoga79

DooshPastesh

Senior Member
Jul 13, 2008
234
59
Gizycko
All right, now I've fixed everything.
Flashed rom from scratch, reinstalled Zepp with deletion of all data (even fit) on phone. Before first syncing with QR code, changed timezone and then first sync. Also I've switched to old GPS firmware. Now everything works as new!
Thanks @Saratoga79 !!

Edit: It must be something with Zepp timezone setting because, after last flash, before syncing the timezone was Asia. So, assuming that time has changed but not with my timezone, it must be Zepp sync failure on iOS.
 
  • Like
Reactions: Saratoga79

Antix2835

Senior Member
Hi man, coming back to install this amazing rom on my Pace.

However when starting the rom installation it shows for a second the cmd terminal and then it automatically closes it without installing the rom or giving me any error. I tried to download v2.8 (and v2.7.1 too) multiple times and from multiple sources without success. V2.7 instead starts normally.

Any idea about what's wrong?
 

lazarot

New member
Apr 22, 2021
1
0
First of all, thanks for this great ROM.

Is necessary to do a factory reset on my watch just to update to a new version based on the latest 2.0.84.0 Chinese firmware? The previous version is working great for me, I'm just getting too often notifications to update to the latest version.
 

Artist_AOP

New member
Apr 28, 2021
1
0
Pace users
How to install WOS ROM
Before you install the ROM, you have to convert your watch model back to Pace again.
Use these commands

Code:
adb root
adb remount rw
adb shell busybox "sed -i 's:ro.build.huami.model=.*:ro.build.huami.model=[B][COLOR="Red"]A1602[/COLOR][/B]:' /system/build.prop


[/QUOTE]
Please remove wrong BB-code from busybox command
 

jmpalmer

New member
May 7, 2021
2
1
Has anyone been experiencing some GPS distance issues with your Stratos 2? Once the run or walk is uploaded or sync with the ZEP app, the route is over buildings or across the street, which is causing the distance to be off by 200 to 300 meters. I´m currently running on the international stock rom. Is the New Stratos 3 GPS chipset the same as the Stratos 2? Would you recommend upgrading the GPS fw? Thanks a lot!!
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Voice Alerts work fine on US language for me, so for Hungarian langauge should work too as both use same Sport app and same English mp3 voice files. Test it without playing music to check if your mp3 music files bit rate is related with your issue.
    Voice Alerts works in 'Run' activity with mp3 playback but not works in 'Trail Run' (with or without mp3 playback).
    Is it possibe to alter this behavior?

    Anyway.... what is the difference between the two running modes (counting calories, distance, ...)?
    1
    That's odd! Mine was set to Africa/Algiers. After changing to Europe/Warsaw the time is ok, first sync didn't changed back to Africa.
    Unfortunately, there's another problem. It is really hard to sync watch with phone. Profile tab in Zepp shows watch as connected, but swiping down on first tab in app hardly syncs (I did maybe 6-7 attempts). Finally, it synced, but app shows 1447 steps, when I did only 499...

    And another one, I have real problem with finding GPS signal.

    hello,

    mine was set to Africa/Algiers too !
    no more issue after putitng Europe/Berlin.

    Laurent
    1
    All right, now I've fixed everything.
    Flashed rom from scratch, reinstalled Zepp with deletion of all data (even fit) on phone. Before first syncing with QR code, changed timezone and then first sync. Also I've switched to old GPS firmware. Now everything works as new!
    Thanks @Saratoga79 !!

    Edit: It must be something with Zepp timezone setting because, after last flash, before syncing the timezone was Asia. So, assuming that time has changed but not with my timezone, it must be Zepp sync failure on iOS.
  • 40
    PACEficator Project|Hybrid ROM 2.0.84.0 v2.8 Installer|Stratos & Pace (2021/01/29)



    THIS IS NOT FOR AMAZFIT VERGE OR STRATOS 3

    THIS IS NOT FOR AMAZFIT VERGE OR STRATOS 3

    THIS IS NOT FOR AMAZFIT VERGE OR STRATOS 3
    disclaimer_xda.png

    I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please make sure you read and understand everything written in the post before flashing it! YOU are choosing to make these modifications and must be sure of what it does.
    info_xda.png

    • The project is aimed to support multilanguage translations for Amazfit Stratos and Pace, installing Stratos Everest ROM on both Stratos and Pace watches.
    • This will merge Pace WOS ROM and Stratos Everest ROM in one project, known as Hybrid ROM.
    • This Custom ROM is based on latest Stratos Stable Chinese Firmware, and used translations are from STOCKfied and Pace ROM on Crowdin (See Post #3) and OneSky before.
    • Never take OTA updates when running a custom ROM.
    • For a correct Vo2max measurement, you have to correctly set all your personal data in Amazfit App Profile menu, Heart Rate zones included
    Stratos users
    • This is an evolution of Everest ROM so you will not note any difference
    • Always choose Stratos A1609/A1619 in "Your watch is a" setup
    • Choose between Old or New key mapping
    Pace users
    • This will install Stratos Everest ROM with all needed files for Pace
    • Always choose Pace A1602/A1612 in "Your watch is a" setup
    • After a Factory Reset, pair the watch in Amazfit app as Stratos
    • Vo2max support
    • Choose between Power, laps or lock button remap

      What is not working on Pace
    • If you are NOT going to use Vo2max feature, this is a list of what is NOT WORKING: (AFAIK)
      · Double tap to wake (DT2W)
      · Face palm cover lock
    • If you are going to use Vo2max feature, this is a list of what is NOT WORKING: (AFAIK)
      · Double tap to wake (DT2W)
      · Face palm cover lock
      · Built-in Heart-Rate Monitor. This is why you need a Bluetooth Heart-Rate Monitor
      · Compass app
      · Barometer
      · Altitude measurement is bugged during activity or may be stuck always in initial value
      · After an activity is finished, you will not get any Elevation value
      · Maybe some other data
      · Mic
      · You tell me more
    Tips for Pace users
    • Don't use your Pace for swimming
      03-512.png
    • After ROM installation check bootloader status to ensure everything went fine and you are still unlocked
    features_xda.png

    • Based on latest Stratos Stable Chinese Firmware
    • Supported languages (some languages may be in English/Chinese):
    1. Español (ES)
    2. English (US)
    3. Euskera (EU)
    4. Portuguese (BR)
    5. Catalán (CA)
    6. German (DE)
    7. French (FR)
    8. Hungarian (HU)
    9. Italian (IT)
    10. Hebrew (HE)
    11. Dutch (NL)
    12. Polish (PL)
    13. Turkish (TR)
    14. Portuguese (PT)
    15. Czech (CS)
    16. Slovak (SK)
    17. Greek (GR)
    18. Slovenian (SI)
    19. Russian (RU)
    20. Croatian (HR)
    21. Vietnamese (VN)
    22. Arabic (SA)
    23. Persian (AF)
    24. Thai (TH)
    25. Bulgarian (BG)
    26. Serbian (SR)
    27. Korean (KR) (New)
    • Sport voice alerts:
    • Spanish
    • Basque
    • English
    • Polish
    • Italian
    • French
    • Portuguese-BR
    • Vo2max support for Pace* (Check Requirements)
    • Manual laps support for Pace* (Check Requirements)
    • Deleted Chinese apps
    • Alipay.apk
    • XimalayaSound.apk
    • Stratos 3 apps
    • Neon icon theme in Settings
    • Real time data of Last Lap (L.L.) and Current Lap (C.L.)
    • Init.d support and included script
    • Zipalign binary by @osm0sis (App optimization)
    • Samsung OneUI 2.1 emojis with Unicode 12 support
    • AmazMod or WatchDroid (notifications manager)
    • PaceCalendar, GreatFit and T9 keyboard (AmazMod)
    • Font selection and preview (?) for stock notifications
    • Stock
    • Arabic
    • Hebrew
    • Samsung OneUI 2.1
    • MIUI12
    • Applemint
    • Thai and Korean fonts
    • Option to choose between old Pace or new Stratos GPS Firmware
    • Option to choose animations speed
    • New bootanimations
    • Save locations and navigate to them starting an activity
    • Old keys mapping
    • Option for ADB/Fastboot/USB driver installation
    • Option to launch QR code
    • Re-enabled OTA update notifications
    • Option to install watchface date format mod
    • No 2 widget limitation
    variants_xda.png

    • Stratos
    • A1609(S) CN/Chinese version
    • A1619(S) US/Global/International version
    • Pace
    • A1602 CN/Chinese version
    • A1612 US/Global/International version
    requisitos_xda.png

    • Properly installed adb/fastboot drivers on your PC
    • Unlocked Bootloader if you are on stock/original firmware
    • Minimum firmware versión 2.x.x.x, latest version recommended
    • 40% battery
    • 300 MB free on your watch
    • Doing a Factory Reset is recommended on installation and mandatory for Pace
    * If you are going to use Vo2max feature in Pace, you MUST use a Bluetooth Heart Rate monitor

    credits_xda.png

    installation.png

    Windows automatic installer
    1. Sync all your data with Amazfit App
    2. Download the ROM zip
    3. Extract it somewhere
    4. Connect your watch to PC (Watch needs to be full booted (showing the Watch Face))
    5. Run .exe file (without administrator privileges)
    6. Choose your language
    7. Choose ROM installation
    8. Setup the features of the ROM (Some features will increase installation time considerably). Choose Yes in Factory Reset setup if you are a Pace user, recommended for Stratos users too
      8.a Stratos users: Always choose Stratos A1609/A1619 in "Your watch is a" setup. This will enable a new setup menu, Key mapping:
      8.a.1 Key mapping: Choose buttons behaviour between Old or New key remap


      8.b Pace users: Always choose Pace A1602/A1612 in "Your watch is a" setup. This will enable new setup menus, Vo2max Pace and Button remap, where:
      8.b.1 Vo2max Pace: Choose if you want to use Vo2max feature
      8.b.2 Button remap: Choose button behaviour between Power, laps and lock remap


      Check screenshots for more info
    9. Click ROM installation
    10. Wait and enjoy
    [*]Configure your watch and Amazfit app and install Stratos 3 apps if you want from Main Menu>Stratos 3 apps

    Some screenshot

    0.png

    1.png

    2.png

    2-1.png

    How to take a log of the installation output (Windows .bat)
    When the installation is finished, left click at top-left corner>Edit>Select all

    log1.png

    Now left click again at top-left corner>Edit>Copy
    log2.png

    Now go to any folder or desktop, right click>New>New text file, rename the file, open and paste there what you copied before. Post or upload here that .txt.

    Installation output examples
    Look attached files

    Alternative Windows installers, Linux scripts and Manual Installation method
    Check Post #2
    Language change
    You can switch between different languages with ease choosing Change language menu in the installer, but note that you MUST have the ROM installed to do it.
    Pace users can also enable or disable Vo2max feature from here, as other configuration.
    1. Run .exe file (without administrator privileges)
    2. Choose your language
    3. Choose Change language
    4. Setup the features of the ROM (Some features will increase installation time considerably)
    5. And choose ROM installation
    6. Wait and enjoy
    CN Apps Pack
    You can install/uninstall some Chinese apps which are removed by default from Change language>CN Apps Pack>Install

    • Alipay.apk (deleted by default)
    • HmTvHelper.apk (MiRemote) (not deleted by default)
    • WearSmartHome.apk (MiHome) (not deleted by default)
    • XimalayaSound.apk (deleted by default)
    Added scripts to install Stratos 3 apps and Health app

    Stratos 3 apps

    Some info
    I added a new menu in the installer, Main Menu>Stratos 3 Apps. In this new page you will be able to choose between usually installed Stratos 3 apps zip and Health app, which needs some specific steps before installation.

    Health app
    If you want to install Stratos 3 apps and Health app, you have to follow these steps before installation:

    1. Install the ROM as usual. AmazMod installation is needed for full support
    2. When installation is done, pair the watch if needed and configure your watch as usual
    3. Configure everything in phone as usual, Amazfit and AmazMod app
    4. If you are going to use Continuous HR measurement feature in your watch, be sure to enable it and check HR data syncs correctly in Amazfit app. Note that Stratos 3 Health app doesn't have a toggle to enable/disable this feature, so this feature has to be enabled before. IMPORTANT: When you run one of these scripts don't touch the screen of the watch because the scripts will so some stuff like unlock the watch, launch a screen and send a tap action in HR button of the
    5. Install Stratos 3 apps and Health app.
    You can install Stratos 3 apps only if you want, without Health app.
    You can install Health app without continuous HR measurement enabled and still take manual HR measurements.
    If HR data doesn't sync in Amazfit app you can try to force close Amazfit app and cleaning app's cache and data.
    If you install Health app and you want to go into stock firmware or just reinstall the ROM again but without the app, after the installation, you will have to do a factory reset or use the new shell script health_fix to avoid Stratos Health app from crashing.

    Bugs
    As for now, the known bugs are:

    • Weather data not fully working for stock watchfaces but you can use AmazMod and its weather provider to have partial data
    • If you install Health app without enabled continuous HR measurement, you can still take manual measurements but you can't check for previous data (3 dot icon) as watch Launcher will crash.
    • Manual HR measurement doesn't seem to sync in the app
    • AGPS and Location Services settings in Settings>General menu
    • Ultra mode
    First boot after ROM installation and factory reset will take around 5-10 min

    Some tips
    If you install any 3th party apps like AmazMod, you MUST enable launcher Applist in order to use them, and open them at least once.
    New shell scripts
    You can use AmazMod or a PC:
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type the name of the script you want to run, and press RUN.
    PC
    Open a command window or terminal and use these commands:

    Code:
    adb shell script_name
    Added scripts in this version (/system/xbin):
    • health_fix Fix Stratos/Pace Health app crash if you installed stock firmware or another ROM and you previously had installed Stratos 3 Health app
    Manual command:
    Code:
    adb -d kill-server
    adb -d start-server
    adb -d root
    adb -d shell su -c rm -r /data/user/0/com.huami.watch.health/
    adb -d reboot
    adb -d kill-server
    • hr0 Disables continuous HR measurement (Beta)
    • hr1 Enables continuous HR measurement (Beta)
    • disable_ota Disable OTA notifications (If you apply this on iOS, and you do a factory reset, you MUST enable notifications in order to pair again the watch
    • enable_ota Enable OTA notifications
    • cache Wipe Dalvik-Cache
    • stratos_new For New key mapping in Stratos
    • stratos_old For Old key mapping in Stratos
    • pace_power For Pace, the button will work as Stratos' upper button, you can switch between all widgets (swipe left) or scroll up in menus, and launch Power menu with a long press. Unlocks the screen when screen is locked. During activity will pause/resume the activity when screen is unlocked
    • pace_laps For Pace, the button will work as Stratos' lower button, you can switch between all widgets (swipe right) or scroll down in menus, and will show notification tab with a long press. Unlocks the screen when screen is locked. During the activity will take manual laps when screen is unlocked
    • pace_lock For Pace, the button will lock the screen immediately. Unlocks the screen when screen is locked but note that it may fail sometimes, so be advised, after locking the screen with the button you may wait for 5 seconds in order to unlock it. During the activity will lock the screen immediately
    • pace_vo2max0 For Pace, to disable Vo2max
    • pace_vo2max1 For Pace, to enable Vo2max
    • hybrid_to_pace For Pace, if you want to install WOS ROM. If you install stock firmware just do a Factory Reset after installation
    • qr Launch paring QR code
    • reset Do a Factory Reset

    Factory Reset
    • This will wipe all your data and installed applications so sync all data in Amazfit app before installation.
    • While wiping data you must turn off bluetooth on your phone and unpair the watch on Amazfit app.
    • When whole installation process finishes, turn on bluetooth on your phone and pair the watch on Amazfit app.
    • If you face any trouble pairing the watch reboot both, watch and phone, and try again.
    NOTE
    • Sync all your data with Amazfit app before installing the ROM.
    • Doing a Factory Reset during ROM installation is recommended.
    • Before first activity, calibrate and run the Compass outdoor for few minutes. Also starting an activity outdoors for few minutes is recommended in order to check GPS connection and altitude.
    • Before starting any activity, sync all your data with Amazfit app in order to update A-GPS data if needed.
    • If data is not syncing after an activity, turn off bluetooth on your phone, unpair the watch, turn on the bluetooth and repair the watch.
    • If you still face issues to sync data, install the Amazfit App Data Sync Fix.
    • Install only one notifications manager, AmazMod or WatchDroid app on your phone
    • AmazMod official thread.
      • If phone app is not connecting with your watch, remember to reboot the phone after installing the app from Play Store. Note that Amazfit app must be installed too.
      • If you are getting duplicated notifications, go to app settings, disable notifications, apply, enable notifications and apply again. Remember to disable notifications for Amazfit app.
      • If you can't see the calendar widget, go to AmazMod>Settings>Reorder Widgets and enable it there. If still no widget, reboot your watch and try again.
    • GreatFit official thread.
    • SuperFit official thread.
    • T9 keyboard official thread.
    • If Training widget, or any other widget on watch, stays loading and never does, disable that widget on Amazfit app and enable it.
    • To report any bug or issue, you must give as much info as possible, like a log or a copy-paste text of the installation process or a screenshot.
    • If you want to collaborate in this project, you can do it here.
    • Installing AmazBoost mod will probably break init.d support.
    downloads_xda.png

    Latest version
    Instalador v2.8 Hybrid 2.0.84.0 | Mirror | More info
    Previous versions
    Instalador v2.7.1 Hybrid 2.0.83.0 | Mirror | More info
    Instalador v2.7 Hybrid 2.0.83.0 | Mirror | More info | Bug Fixes: Watchface date mod fix
    Instalador v2.6.1 Hybrid 2.0.82.0 | Mirror | More info | Bug fixes: Stratos3 HR Launcher fix for Hybrid v2.6
    Instalador v2.5 Hybrid 2.0.81.0 | Mirror | More info | Bug fixes: Stratos3 Alarm fix for Hybrid v2.5
    Instalador v2.4.1 Hybrid 2.0.80.0 | Mirror | More info | Bug fixes: NL Launcher fix for Hybrid v2.4.1
    Instalador v2.4 Hybrid 2.0.80.0 | Mirror | More info
    Instalador v2.3 Hybrid 2.0.74.1 | Mirror | More info
    Instalador v2.2.1 Hybrid 2.0.70.1 | Mirror | Fixed Alternative ROM_US.bat installer
    changelog_xda.png

    Changelog v2.7.1 -> v2.8 (2021/01/29)
    • Based on Stratos Stable 2.0.84.0 Chinese firmware
      • Bug fixes
    • Updated translations
    • New Korean (KR) language
    • AmazTimer 8.1
    • AmazMod service 1914
    • WatchDroid 15.40
    • New WearOS bootanimation (MiWatch)
    • Updated New GPS firmware version to 19439
    • Stratos 3 apps updated to CN 4.0.22.0 version
      • Improved Launcher applist
      • Fixed the crash when entering to manual HR measurement data screen in Health app
      • Added HR toggle between continuous and manual modes through AmazMod scripts (hr1, hr0)
    • Automatic bootloader unlock method (Windows)
    New PACEficator Project Telegram Channel
    Join us to be up to date
    https://telegram.me/joinchat/AAAAAFMzCpOaRgEowNH1bg

    donate.png

    • If you like my work you can buy me a beer here
    13
    Hybrid ROM 2.0.81.0 v2.5 Installer

    Hybrid ROM 2.0.81.0 v2.5 Installer

    Downloads
    Hybrid ROM 2.0.81.0 v2.5 Installer | Mirror

    Changelog v2.4.1 -> v2.5 (2020/01/03)
    • Based on Chinese 2.0.81.0 Stable Firmware
    • Update GPS firmware
    • Optimize the stability of motor function
    • Optimized indoor running pace algorithm
    • Fixed automatic suspension of outdoor running
    • Fix the inconsistency between watch and mobile phone time caused by Brazilian daylight saving time
    • Fix abnormal swimming target reminder
    • Updated translations
    • Apps from CN Stratos3 4.0.13.0 Firmware
    • Launcher, MediaPlayer, Settings, CharguingUI, Compass, Location and AlarmClock

    Stratos3 apps
    Some info
    I added a new optional menu in the installer, which will flash some apps in recovery if you choose to install Strato3 apps. Note that it may contain some bugs or untranslated strings.
    As for now, the known bugs are:

    • Weather data not working for stock watchfaces
    • AGPS and Location Services settings in Settings>General menu
    • Vibration strength intensity selection
    • Ultra mode
    First boot after ROM installation and factory reset will take around 5-10 min and Launcher app may crash few times.

    Some tips
    If you install any 3th party apps like AmazMod, you MUST enable launcher Applist in order to use them, and open them at least once.

    New mods scripts
    OTA Update Notifications
    Remember that you shouldn't accept any OTA update on a custom ROM.
    New mods scripts in watch to disable/enable the notifications, you can use AmazMod or a PC:
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type these commands:
    • disable_ota = To disable OTA notifications (If you apply this on iOS, and you do a factory reset, you MUST enable notifications in order to pair again the watch.
    • enable_ota = To enable OTA notifications
    PC
    Open a command window or terminal and use these commands:
    • adb shell disable_ota = Disables the notifications.
    • adb shell enable_ota = Enables the notifications.
    The watch will reboot to apply the changes.
    Manual commands to enable them
    Code:
    adb -d kill-server
    adb -d start-server
    adb -d root
    adb -d remount rw
    adb -d shell busybox "sed -i 's:ro.build.display.id=.*:ro.build.display.id=everest-[B][COLOR="red"]2.0.81.0[/COLOR][/B][B][COLOR="SeaGreen"]v2.5[/COLOR][/B]:' /system/build.prop
    adb -d remount ro
    adb -d reboot
    adb -d kill-server
    Manual commands to enable them
    Code:
    adb -d kill-server
    adb -d start-server
    adb -d root
    adb -d remount rw
    adb -d shell busybox "sed -i 's:ro.build.display.id=.*:ro.build.display.id=everest-[B][COLOR="Red"]2.0.81.0[/COLOR][/B]:' /system/build.prop
    adb -d remount ro
    adb -d reboot
    adb -d kill-server

    Wipe Dalvik-Cache (New)
    New mods scripts in watch, you can use AmazMod or a PC to wipe dalvik-cache:
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type these commands:
    • cache
    PC
    Open a command window or terminal and use these commands:
    • adb shell cache
    The watch will reboot to apply the changes.

    Stratos users. Key buttons remap
    New mods scripts in watch, you can use AmazMod or a PC to change buttons behaviour between Old and New key mapping:
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type these commands:
    • stratos_new = For New key mapping
    • stratos_old = For Old key mapping
    PC
    Open a command window or terminal and use these commands:
    • adb shell stratos_new = For New key mapping
    • adb shell stratos_old = For Old key mapping
    The watch will reboot to apply the changes.

    Pace users. Button remap
    New mods scripts in watch, you can use AmazMod or a PC to change button behaviour between Power, Laps and Lap key mapping:
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type these commands:
    • pace_power = The button will work as Stratos' upper button, you can switch between all widgets (swipe left) or scroll up in menus, and launch Power menu with a long press. Unlocks the screen when screen is locked. During activity will pause/resume the activity when screen is unlocked
    • pace_laps = The button will work as Stratos' lower button, you can switch between all widgets (swipe right) or scroll down in menus, and will show notification tab with a long press. Unlocks the screen when screen is locked. During the activity will take manual laps when screen is unlocked
    • pace_lock = The button will lock the screen immediately. Unlocks the screen when screen is locked but note that it may fail sometimes, so be advised, after locking the screen with the button you may wait for 5 seconds in order to unlock it. During the activity will lock the screen immediately
    PC
    Open a command window or terminal and use these commands:
    • adb shell pace_power = The button will work as Stratos' upper button
    • adb shell pace_laps = The button will work as Stratos' lower button
    • adb shell pace_lock = The button will lock the screen immediately
    The watch will reboot to apply the changes.

    Pace users. How to Enable or Disable Vo2max feature
    New mods scripts in watch, you can use AmazMod or a PC to enable or disable Vo2max feature.
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type these commands:
    • pace_vo2max0 = To disable Vo2max
    • pace_vo2max1 = To enable Vo2max
    PC
    Open a command window or terminal and use these commands:
    • adb shell pace_vo2max0 = To disable Vo2max
    • adb shell pace_vo2max1 = To enable Vo2max
    The watch will reboot to apply the changes.

    Pace users. How to go back to stock firmware or WOS ROM
    New mods scripts in watch, you can use AmazMod or a PC to run the mod before you install stock firmware or WOS ROM to transform your watch into Pace again.
    If you want to go back to stock firmware, just install the firmware and after that do a Factory Reset
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type this command:
    • hybrid_to_pace
    PC
    Open a command window or terminal and use these commands:
    • adb shell hybrid_to_pace
    The watch will reboot to apply the changes.

    How to take a log of the installation output (Windows .bat)
    When the installation is finished, left click at top-left corner>Edit>Select all
    log1.png

    Now left click again at top-left corener>Edit>Copy
    log2.png

    Now go to any folder or desktop, right click>New>New text file, rename the file, open and paste there what you copied before. Post or upload here that .txt.
    10
    Hybrid ROM 2.0.82.0 v2.6 Installer

    Hybrid ROM 2.0.82.0 v2.6 Installer

    Downloads
    Hybrid ROM 2.0.82.0 v2.6 Installer | Mirror

    Changelog v2.5 -> v2.6 (2020/03/04)
    • Based on Stratos Stable 2.0.82.0 Chinese firmware
    • New "Hold on Wuhan" watchface
    • Bug fixes
    • Updated translations
    • Added Serbian (SR) language
    • Apps from CN Stratos 3 Firmware
    • Launcher, MediaPlayer, Settings, CharguingUI, Compass, Location, Health and StarWars bootanimation (4.0.14.6)
    • AlarmClock (4.0.13.0)
    • Partial weather data info in stock watchfaces (AmazMod is needed)
    • Independent installation
    • AmazMod 1906
    • New shell scripts
    • New installation scripts for Windows/Linux

    Stratos 3 apps
    Some info
    I added a new menu in the installer, Main Menu>Stratos 3 Apps. In this new page you will be able to choose between usually installed Stratos 3 apps zip and Health app, which needs some specific steps before installation.
    Health app
    If you want to install Stratos 3 apps and Health app, you have to follow these steps before installation:
    1. Install the ROM as usual. AmazMod installation is needed for full support
    2. When installation is done, pair the watch if needed and configure your watch as usual
    3. Configure everything in phone as usual, Amazfit and AmazMod app
    4. If you are going to use Continuous HR measurement feature in your watch, be sure to enable it and check HR data syncs correctly in Amazfit app. Note that Stratos 3 Health app doesn't have a toggle to enable/disable this feature, so this feature has to be enabled before
    5. Install Stratos 3 apps and Health app.
    You can install Stratos 3 apps only if you want, without Health app.
    You can install Health app without continuous HR measurement enabled and still take manual HR measurements.
    If HR data doesn't sync in Amazfit app you can try to force close Amazfit app and cleaning app's cache and data.
    If you install Health app and you want to go into stock firmware or just reinstall the ROM again but without the app, after the installation, you will have to do a factory reset or use the new shell script health_fix to avoid Stratos Health app from crashing.
    Bugs
    As for now, the known bugs are:
    • Weather data not fully working for stock watchfaces but you can use AmazMod and its weather provider to have partial data
    • If you install Health app without enabled continuous HR measurement, you can still take manual measurements but you can't check for previous data (3 dot icon) as watch Launcher will crash.
    • AGPS and Location Services settings in Settings>General menu
    • Vibration strength intensity selection
    • Ultra mode
    First boot after ROM installation and factory reset will take around 5-10 min

    Some tips
    If you install any 3th party apps like AmazMod, you MUST enable launcher Applist in order to use them, and open them at least once.

    New shell scripts
    You can use AmazMod or a PC:
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type the name of the script you want to run, and press RUN.
    PC
    Open a command window or terminal and use these commands:
    Code:
    adb shell [COLOR="purple"][B]script_name[/B][/COLOR].sh
    Added scripts in this version (/system/xbin):
    • health_fix
    Manual command:
    Code:
    adb -d kill-server
    adb -d start-server
    adb -d root
    adb -d shell su -c rm -r /data/user/0/com.huami.watch.health/
    adb -d reboot
    adb -d kill-server
    Fix Stratos/Pace Health app crash if you installed stock firmware or another ROM and you previously had installed Stratos 3 Health app
    • hr0
    Disables continuous HR measurement (Beta)
    • hr1
    Enables continuous HR measurement (Beta)

    Please post here your feedback and experience with new Stratos 3 apps and Health app.
    9
    Hybrid ROM 2.0.80.0 v2.4 Installer

    Hybrid ROM 2.0.80.0 v2.4 Installer

    Downloads
    Hybrid ROM 2.0.80.0 v2.4 Installer | Mirror

    Changelog v2.3 -> v2.4 (2019/10/29)
    • Based on Chinese 2.0.80.0 Stable Firmware
    • New GPS firmware
    • Optimized step frequency algorithm
    • Optimized system stability
    • Repair breaks repeat number of errors
    • Updated translations
      Added SuperFit 1.7 watchface (AmazMod)
      WatchDroid 13
    • Option added to choose key buttons remap
    • Old or new (Stratos)
    • Power, laps or lock (Pace)
    • Mods scripts included in watch
    • New GPS firmware v19074 (Not tested)

    New mods scripts
    OTA Update Notifications
    Remember that you shouldn't accept any OTA update on a custom ROM.
    New mods scripts in watch to disable/enable the notifications, you can use AmazMod or a PC:
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type these commands:
    • disable_ota = To disable OTA notifications (If you apply this on iOS, and you do a factory reset, you MUST enable notifications in order to pair again the watch.
    • enable_ota = To enable OTA notifications
    PC
    Open a command window or terminal and use these commands:
    • adb shell disable_ota = Disables the notifications.
    • adb shell enable_ota = Enables the notifications.
    The watch will reboot to apply the changes.
    Manual commands to enable them
    Code:
    adb -d kill-server
    adb -d start-server
    adb -d root
    adb -d remount rw
    adb -d shell busybox "sed -i 's:ro.build.display.id=.*:ro.build.display.id=everest-[B][COLOR="red"]2.0.80.0[/COLOR][/B][B][COLOR="SeaGreen"]v2.4[/COLOR][/B]:' /system/build.prop
    adb -d remount ro
    adb -d reboot
    adb -d kill-server
    Manual commands to enable them
    Code:
    adb -d kill-server
    adb -d start-server
    adb -d root
    adb -d remount rw
    adb -d shell busybox "sed -i 's:ro.build.display.id=.*:ro.build.display.id=everest-[B][COLOR="Red"]2.0.80.0[/COLOR][/B]:' /system/build.prop
    adb -d remount ro
    adb -d reboot
    adb -d kill-server

    Stratos users. Key buttons remap
    New mods scripts in watch, you can use AmazMod or a PC to change buttons behaviour between Old and New key mapping:
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type these commands:
    • stratos_new = For New key mapping
    • stratos_old = For Old key mapping
    PC
    Open a command window or terminal and use these commands:
    • adb shell stratos_new = For New key mapping
    • adb shell stratos_old = For Old key mapping
    The watch will reboot to apply the changes.

    Pace users. Button remap
    New mods scripts in watch, you can use AmazMod or a PC to change button behaviour between Power, Laps and Lap key mapping:
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type these commands:
    • pace_power = The button will work as Stratos' upper button, you can switch between all widgets (swipe left) or scroll up in menus, and launch Power menu with a long press. Unlocks the screen when screen is locked. During activity will pause/resume the activity when screen is unlocked
    • pace_laps = The button will work as Stratos' lower button, you can switch between all widgets (swipe right) or scroll down in menus, and will show notification tab with a long press. Unlocks the screen when screen is locked. During the activity will take manual laps when screen is unlocked
    • pace_lock = The button will lock the screen immediately. Unlocks the screen when screen is locked but note that it may fail sometimes, so be advised, after locking the screen with the button you may wait for 5 seconds in order to unlock it. During the activity will lock the screen immediately
    PC
    Open a command window or terminal and use these commands:
    • adb shell pace_power = The button will work as Stratos' upper button
    • adb shell pace_laps = The button will work as Stratos' lower button
    • adb shell pace_lock = The button will lock the screen immediately
    The watch will reboot to apply the changes.

    Pace users. How to Enable or Disable Vo2max feature
    New mods scripts in watch, you can use AmazMod or a PC to enable or disable Vo2max feature.
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type these commands:
    • pace_vo2max0 = To disable Vo2max
    • pace_vo2max1 = To enable Vo2max
    PC
    Open a command window or terminal and use these commands:
    • adb shell pace_vo2max0 = To disable Vo2max
    • adb shell pace_vo2max1 = To enable Vo2max
    The watch will reboot to apply the changes.

    Pace users. How to go back to stock firmware or WOS ROM
    New mods scripts in watch, you can use AmazMod or a PC to run the mod before you install stock firmware or WOS ROM to transform your watch into Pace again.
    If you want to go back to stock firmware, just install the firmware and after that do a Factory Reset
    AmazMod
    In phone's app, go to Settings>Tweaks, and in the command line type this command:
    • hybrid_to_pace
    PC
    Open a command window or terminal and use these commands:
    • adb shell hybrid_to_pace
    The watch will reboot to apply the changes.

    How to take a log of the installation output (Windows .bat)
    When the installation is finished, left click at top-left corner>Edit>Select all
    log1.png

    Now left click again at top-left corener>Edit>Copy
    log2.png

    Now go to any folder or desktop, right click>New>New text file, rename the file, open and paste there what you copied before. Post or upload here that .txt.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone