when i try fastboot update pa image i get : failed boota_a no such partition. did i miss something? i was in ob 11 beta 5
Paranoid Android Ruby Beta 5 - OnePlus 8/Pro
- Thread starter ZVNexus
- Start date
Download 20201221.zip
extract recovery image inside this build with payload dumper
flash recovery
boot to recovery
sideload 20201221.zip
After 4-5 days self learning.
A little bit more detail instructions by me.
reboot phone to bootloader mode
fastboot update pa-ruby-alpha-1-oneplus8-20201122-image.zip
it will auto reboot when done
screen become mess can't see anything
adb devices
this should show your device id
adb reboot bootloader (the recovery extract from payload of pa-ruby-alpha-2-oneplus8-20201221.zip)
fastboot flash recovery recovery.img
volume botton select boot to recovery
recovery will suggest factory reset do it
when finish it will auto reboot
reboot to 1st setup screen setting up rom
reboot to recovery Apply update from ADB
adb reboot recovery
volume botton select apply update from adb
press power to confirm
adb sideload pa-ruby-alpha-2-oneplus8-20201221.zip
wait the rom update
back to recovery screen press power to reboot
wait the rom reboot finished.
I hope this help.
A little bit more detail instructions by me.
reboot phone to bootloader mode
fastboot update pa-ruby-alpha-1-oneplus8-20201122-image.zip
it will auto reboot when done
screen become mess can't see anything
adb devices
this should show your device id
adb reboot bootloader (the recovery extract from payload of pa-ruby-alpha-2-oneplus8-20201221.zip)
fastboot flash recovery recovery.img
volume botton select boot to recovery
recovery will suggest factory reset do it
when finish it will auto reboot
reboot to 1st setup screen setting up rom
reboot to recovery Apply update from ADB
adb reboot recovery
volume botton select apply update from adb
press power to confirm
adb sideload pa-ruby-alpha-2-oneplus8-20201221.zip
wait the rom update
back to recovery screen press power to reboot
wait the rom reboot finished.
I hope this help.
So I don't need to flash the image first?
Which oos version is recommended?
I don't understand why fastboot update didn't find partition a. Even after using msm tool
flashed beta 1 been running it for a while here's what I have found
1) mtp does indeed make the phone go to crashdump
2) color profiles don't work
3) no way to change the refresh rate
4) AOD makes the screen not turn back on have to restart the device to turn it on
1) mtp does indeed make the phone go to crashdump
2) color profiles don't work
3) no way to change the refresh rate
4) AOD makes the screen not turn back on have to restart the device to turn it on
To everyone having issues in installing the ROM I suggest that you extract the payload flash the recovery that was in the extracted payload, reboot to recovery choose apply update from ADB from the recovery and then run the adb sideload command to flash the zip for e.g adb sideload paranoid-android.zip
BTW, if anyone wants to test out a resolution for the crashdump issue, reach out to me on TG. I can't really reproduce the issue too well.
It's 120, but you can't change it from that for now.
AOSPA/android_device_oneplus_oneplus8
Contribute to AOSPA/android_device_oneplus_oneplus8 development by creating an account on GitHub.
github.com
WARP charging does work, just confirmed. It just doesn't say that it's WARP charging specifically.
How is this rom compared to stock? pro and cons?
Sorry, this is the first time i leave phone stock for this long time, i've buys op8pro at day1 and now i miss the whole mod scene on it.
Sorry, this is the first time i leave phone stock for this long time, i've buys op8pro at day1 and now i miss the whole mod scene on it.
It is still in beta and you will find bugs, if that is not a problem for you then try it and you can help by reporting bugs
I've done this for a long time, unfortunately I can't do it no more because this is my only phone and if something goes wrong I risk to loose my work
. I will wait or ask for a backup phone at my family, it's great to help in developing, even with just testing
AOD is fixed, MTP is fixed (maybeTM, only had about 2 people test), will be in Beta 2
That's great to hear. this is my favorite custom ROM right now
Coming from crDroid I get this error:
Reset phone with MSM tool, same error. Anyone else experience this?
Code:
fastboot update pa-ruby-beta-1-oneplus8-20210111-signed-image.zip
extracting android-info.txt (0 MB) to RAM...
extracting boot.img (96 MB) to disk... took 0.434s
target reported max download size of 805306368 bytes
archive does not contain 'boot.sig'
archive does not contain 'boot_other.img'
extracting dtbo.img (24 MB) to disk... took 0.080s
archive does not contain 'dtbo.sig'
archive does not contain 'dt.img'
extracting recovery.img (100 MB) to disk... took 0.434s
archive does not contain 'recovery.sig'
extracting system.img (865 MB) to disk... took 5.014s
archive does not contain 'system.sig'
archive does not contain 'system_other.img'
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
extracting vendor.img (1304 MB) to disk... took 7.055s
archive does not contain 'vendor.sig'
archive does not contain 'vendor_other.img'
--------------------------------------------
Bootloader Version...:
Baseband Version.....:
Serial Number........: e8634940
--------------------------------------------
checking product...
OKAY [ 0.003s]
sending 'boot_a' (98304 KB)...
OKAY [ 2.277s]
writing 'boot_a'...
OKAY [ 0.306s]
sending 'dtbo' (24576 KB)...
OKAY [ 0.572s]
writing 'dtbo'...
OKAY [ 0.066s]
sending 'recovery' (102400 KB)...
OKAY [ 2.372s]
writing 'recovery'...
OKAY [ 0.429s]
sending sparse 'system' 1/2 (720896 KB)...
OKAY [ 17.202s]
writing 'system' 1/2...
FAILED (remote: Partition not found)
finished. total time: 23.254sReset phone with MSM tool, same error. Anyone else experience this?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1
I'd say yes. But if your on verizon networks don't waste your time. It doesn't get data/internet -
15
We are very excited to announce the beta of Paranoid Android Ruby, based on Android 11.
On the first launch, you’ll notice a clean setup with a beautiful wallpaper from Hampus Olsson, who teamed up with us again to create several beautiful pieces of artwork. Hampus is a multi-disciplinary artist whose design stands for itself and we’re glad to have him onboard. We also added further UI touches that we believe enhance the overall user experience. You can find all of the Paranoid Android wallpapers and many more in the Abstruct app, included in our builds.
Our builds are based on the Code Aurora Forum Android base, which is optimized for Qualcomm platforms and has a higher degree of performance, battery life, and functionality compared to the Android Open Source Project platform. The Paranoid Android team and contributors are focusing on squashing existing bugs, and implementing and improving features, performance, and stability. We are dedicated to providing a user experience with the stability that you can expect from stock ROMs with best-in-class performance and features to help you get the most out of your device.
Notice
As we are growing on our list of supported devices in each release, we require of a stronger build environment so we can speed up the compilation process for releases. Based on the actual Quartz 4 list, we support over 30 devices, which takes between 2 and 3 days for all the builds to be completed without counting possible compilation issues or rebuild needs, based on our current specs.
We kindly ask all of you that are in position to donate anything, to help and support us so we can provide better and faster build releases, as well as increase the download speed of our servers, all looking for your enjoyment.
You can donate here
Device-specific issues
Call related issues on Google Fi
Miracast
There are likely many other issues, these are just the most prominent to me. Don't come into this with the expectation any issue you come across will be fixed in a timely manner.
Note: Custom kernels are NOT supported unless the kernel says it supports PA and GMS is included!
Requirements
My preferred logging format is:
adb logcat -b all -d *:E > logcat-err.log
adb logcat -b all -d > logcat.log
adb shell dmesg > dmesg.log
Then you can upload them to https://del.dog and send me the link for each one.
Download (Note, OP8 & Pro builds are no longer unified)
Instructions
- Download the latest fastboot zip we released (hint: it has an -image appended to zip name)
- Reboot to bootloader.
- Flash the fastboot zip with "fastboot update pa-*-signed-image.zip"
- Reboot into recovery after it is done flashing & wipe userdata.
If you already flashed Beta 1, then you can just sideload the OTA in recovery if it is avaliable, although there might be only fastboot images up for the latest version so keep that in mind.
Important / Useful links
Paranoid Android Twitter
Paranoid Android Channel (Telegram)
Paranoid Android Community (Telegram)
Cheers and #StayParanoid!
XDA:DevDB Information
Paranoid Android, ROM for the OnePlus 8/Pro
Contributors
ZVNexus, xboxfanj, Vishalcj17, andrewfluck
Source Code: https://github.com/AOSPA/android_kernel_oneplus_sm8250
ROM OS Version: Android 11
ROM Kernel: Linux 4.19
ROM Firmware Required: Latest OOS Open Beta
Based On: CAF
Version Information
Status: Beta
Current Beta Version: Ruby Beta 5
Beta Release Date: 2021-02-25
Created 2020-11-23
Last Updated 2021-02-255
AOD is fixed, MTP is fixed (maybeTM, only had about 2 people test), will be in Beta 22
Download 20201221.zip
extract recovery image inside this build with payload dumper
flash recovery
boot to recovery
sideload 20201221.zip2Paranoid Recovery:
Apply update from ADB
"adb sideload
pa-ruby-alpha-1-oneplus8-20201122.zip"
can someone please explain to me what it is(ADB)
and explain to me how I can install the Recovery, thank you very much 
If you need to ask these things you should not be installing this
...2
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone