Development Paranoid Android Topaz 6 - Nothing phone (1)

[ivandife]

I was euro 1.1.3 when I did it, 1.1.4 is the same, in fact, you don't really have to care your version when following the tutorial. Flashing the super.img make your phone brand New. So from wichever version you are, you Can follow it

So I don't understand why it doesn't work

 

[AntoXik72]

So I don't understand why it doesn't work

I already told you, you just have to follow the unbrick tutorial. Choose a super.img, it doesn't matter if it's 1.1.4 or 1.1.3 as long as it's Euro. if you don't do that, the utility tool will never work.

 

[ivandife]

Ya te lo dije, solo tienes que seguir el tutorial de desbrick. Elija un super.img, no importa si es 1.1.4 o 1.1.3 siempre que sea Euro. si no lo hace, la herramienta de utilidad nunca funcionará.

So first the super.img and then the tool, right?
I think that's what I did but I'll try again.

 

[AntoXik72]

So first the super.img and then the tool, right?
I think that's what I did but I'll try again.

Yes, and when you flash super partition, make sure to have the same log as the one posted in the 1st post. This would mean you have successfully restored your vendor, system etc partitions

 

[ivandife]

I finally got it, thank you very much

 

[ZeroSakura]

Thx Guys！

 

[AntoXik72]

I finally got it, thank you very much

You're welcome

 

[Exodusnick]

Screen recording not possible .
It also starts running but nothing is recorded and nothing is saved

 

[EvilSega]

Помощь! После прошивки телефон показывает ошибку "нажмите и клавишу для выключения" и не может нигде загрузиться. Как лечить или купить новый?

Mod translation: Help! After the firmware, the phone shows the error "press and key to turn off" and cannot boot anywhere. How to treat or buy a new one?

 

[Deleted member 11872899]

Помощь! После прошивки телефон показывает ошибку "нажмите и клавишу для выключения" и не может нигде загрузиться. Как лечить или купить новый?

https://xdaforums.com/t/paranoid-android-topaz-alpha-2-nothing-phone-1.4505797/post-87620801

Не надо купить новый. (You don't need to buy a new phone)

The important step to restore stock firmware is flashing the super.img first.

 

[EvilSega]

https://xdaforums.com/t/paranoid-android-topaz-alpha-2-nothing-phone-1.4505797/post-87620801

Не надо покупать новый. (Вам не нужно покупать новый телефон)

Важным шагом для восстановления стоковой прошивки является прошивка super.img.

After the firmware, it is not covered by the PC, fastboot devices doesn't bother him...

 

[Deleted member 11872899]

After the firmware, it is not covered by the PC, fastboot devices doesn't bother him...

Bootloader works?

 

[Exodusnick]

@P6P
Works for you Screen recording?

 

[Deleted member 11872899]

@P6P
Works for you Screen recording?

Honestly i can't tell you. I haven't tested that and revert back to stock 1.1.6 now

 

[Exodusnick]

Honestly i can't tell you. I haven't tested that and revert back to stock 1.1.6 now

Ok.

 

[EvilSega]

Bootloader works?

How to check it? It gives this error when it is turned on after a second. Pressing any key turns it off. Listed USB there are no ports. It seems to me that this is a brick and nothing can be done with it?

 

[Deleted member 11872899]

How to check it? It gives this error when it is turned on after a second. Pressing any key turns it off. Listed USB there are no ports. It seems to me that this is a brick and nothing can be done with it?

Well when you press and hold the power button + volume down it should boot into bootloader.

 

[EvilSega]

Ну, когда вы нажимаете и удерживаете кнопку питания + громкость вниз, он должен загрузиться в загрузчик.

No, it immediately throws this error.

 

[Deleted member 11872899]

No, it immediately throws this error.

Well I guess when you're not able to boot into bootloader there is no way to unbrick the device.

 

[Exodusnick]

Just noticed that you can not forward videos like on Telegram.
When trying to post it on Telegram comes only a ! sign.