Partitions on Moto g7 gone?

Search This thread
May 26, 2022
12
0
Moto G7 Power
So I tried to flash a custom recovery and rom but when I flashed my rom it booted to boot loader and it said oem_locked when I had it unlocked 2 minutes ago. So I try to go into twrp and I can’t, says start up failed. I tried using the software but it said it can’t identify my device and it can’t fix anything. I also tried to flash stock rom via and but it said it can’t find and can’t mount any partitions. This leads me to believe that my partitions are gone or corrupt. Can anyone help? Im not sure the model number but I know the phone is a Moto g7 Power from t-mobile that was completely unlocked, boot loader and all.
 

Attachments

  • image.jpg
    image.jpg
    1.6 MB · Views: 13

JonasHS

Senior Member
Oct 15, 2020
53
4
21
Can you get into fastboot mode? Try using the command, fastboot getvar all, it should give you information about partitions available.

Try flashing one image at a time.


You probably need to use an unbrick firmware and (100)% the correct driver.

An unbrick software will format your device ssd and create all the partitions again.
 
May 26, 2022
12
0
Moto G7 Power
I ran getvar and it spat out this.

(bootloader) version: 0.5
(bootloader) version-bootloader: MBM-2.1-ocean_t-16222030b3b-210202
(bootloader) product: ocean
(bootloader) board: ocean
(bootloader) secure: yes
(bootloader) hwrev: PVT1
(bootloader) radio: 1
(bootloader) storage-type: emmc
(bootloader) emmc: 32GB SKHYNIX hB8aP> RV=08 PV=03 FV=0000000034303030
(bootloader) ram: 3GB SKHYNIX LP3 DIE=8Gb M5=06 M6=03 M7=01 M8=5F
(bootloader) cpu: SDM632
(bootloader) serialno: 751d40d
(bootloader) cid: 0xDEAD
(bootloader) channelid: 0x00
(bootloader) uid: 0000000000000000000000000000
(bootloader) securestate: oem_locked
(bootloader) factory-modes: disabled
(bootloader) iswarrantyvoid: n/a
(bootloader) max-download-size: 536870912
(bootloader) reason: Failed to initialize partition table
(bootloader) imei:
(bootloader) imei2:
(bootloader) meid:
(bootloader) date:
(bootloader) sku:
(bootloader) carrier_sku:
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time:
(bootloader) ro.build.fingerprint:
(bootloader) poweroffalarm: 0
(bootloader) ro.build.version.full:
(bootloader) ro.build.version.qcom:
(bootloader) version-baseband:
(bootloader) kernel.version:
(bootloader) sbl1.git: sbl1.git
(bootloader) rpm.git: rpm.git
(bootloader) tz.git: tz.git
(bootloader) devcfg.git: devcfg.git
(bootloader) keymaster.git: keymaster.git
(bootloader) cmnlib.git: cmnlib.git
(bootloader) cmnlib64.git: cmnlib64.git
(bootloader) prov.git: prov.git
(bootloader) aboot.git: MBM-2.1-ocean_t-16222030b3b-210202
(bootloader) frp-state: no protection (err)
(bootloader) ro.carrier:
(bootloader) current-slot:
(bootloader) running-boot-lun: must + g->mlen
(bootloader) running-slot:
(bootloader) slot-suffixes: _a
(bootloader) slot-count: 1
(bootloader) slot-successful:_a: INVALID
(bootloader) slot-successful:_b: INVALID
(bootloader) slot-bootable:_a: INVALID
(bootloader) slot-bootable:_b: INVALID
(bootloader) slot-retry-count:_a: unknown
(bootloader) slot-retry-count:_b: unknown
(bootloader) pcb-part-no:

Also when I try to run Motorola's software it does this

The second picture is what it says when I try to use manual. I click use anyway and it just goes back to saying not appropriate firmware.

Also trying to install the images one by one also didnt work.
 

Attachments

  • a.PNG
    a.PNG
    11.6 KB · Views: 8
  • aa.PNG
    aa.PNG
    9.9 KB · Views: 8

JonasHS

Senior Member
Oct 15, 2020
53
4
21
Once you have installed custom ROM, your partition should not be the same a / b order.

You are need to use moto's unbrick tool in edl.
 

JonasHS

Senior Member
Oct 15, 2020
53
4
21
Your CPU is Qualcomm Snapdragon. You have it. Edl is same some bios on PC. Is built in your phone. Try to boot into it, your are need PC and USB and driver for edl.

I hope you know then you are in edl mode have your phone black screen.
 
May 26, 2022
12
0
Moto G7 Power
Your CPU is Qualcomm Snapdragon. You have it. Edl is same some bios on PC. Is built in your phone. Try to boot into it, your are need PC and USB and driver for edl.

I hope you know then you are in edl mode have your phone black screen.
I tried. It said unknown command. I patched the fastboot exe to tell it to go to edl mode and it says unknown command.
 

JonasHS

Senior Member
Oct 15, 2020
53
4
21
Fastboot can't reboot you into edl, you are need to connect phone to USB to PC and hold vol - and vol+ and power on same time and see device on PC
 

JonasHS

Senior Member
Oct 15, 2020
53
4
21
You don't understand 😐 How did you think android come on SSD. Factory install it with download mode.