[Parts] [LCD] Kate replacement parts (last updated 17Nov17)

[Kiwironic]

I have seen a few people struggling to find parts for the Xiaomi RedMi note 3 Special edition (AKA global edition, SE, Kate and 152mm )

Here are some the I have found:

UPDATE [17 November 2017] :

One link with all the LCD options with and without frame on AliExpress

1- Housing/frame on aliexpress: It is a very very good idea to replace your frame when replacing your LCD, especially that it is $7 to $9 which makes it a no brainer

• Link 1
  
• Cheaper

2- LCD, Digitizer, Display, Screen or whatever you want to call it for the KATE

• Link 1
• Another
• Yet another
• And one more

3- Kate LCD, Digitizer, Display, screen with frame assembly Credit goes to @MyHTCFlyerProblems
One example


4- USB, charging and antennae board

• One seller can be found here Credit goes to @KloNom
  

5- Other parts

• Xiaomi Redmi Note 3 Pro Se Power On Off Volume Button Side Key Flex Ribbon Cable
• Loudspeaker/Buzzer
• Note 3 Pro Special Edition Speaker Microphones Inner MIC Parts
  
• Back cover aka battery cover or housing... Back Cover Battery Door Housing Replacement Part for Xiaomi Redmi Note 3 Note3 international Pro SE Special Edition 152mm
• Another back cover / battery housing
• Earpiece Speaker Earphone Speaker Receiver * 2 pcs
• Fingerprint Scanner for Xiaomi Redmi Note 3 Special Edition Touch Sensor ID Home Button Return Flex Cable Replacement Parts
  
• A selection of batteries, some claim 5100 mAh
• Power and volume buttons
• A selection of Flex cables
  

How to guide:

I have attached some screenshots hoping to save you a bit of time. All the best :fingers-crossed: :fingers-crossed:

 

[mildiou13]

Great !
Thank you Kiwironic. I'm going to order lcd and frame to save my redmi note international edition

 

[iakoboss7]

I have seen a few people struggling to find parts for the Xiaomi RedMi note 3 Special edition (AKA global edition, SE, Kate and 152mm )

Here are some the I have found:

1- Housing/frame on aliexpress: It is a very very good idea to replace your frame when replacing your LCD, especially that it is $7 to $9 which makes it a no brainer

• Link 1
  
• Cheaper

2- LCD, Digitizer, Display, Screen or whatever you want to call it for the KATE

• Link 1
• Another
• Yet another
• And one more

I have attached some screenshots hoping to save you a bit of time. All the best :fingers-crossed: :fingers-crossed:

can you find a usb/power board also?

thank you for your effort.

 

[Giegl]

Incredible. Thank you very much for your effort! @iakoboss7: I guess that the usb/power board is the same for Kate and Kenzo.
I can assure that the Redmi Note 2 3G ear speaker fits the Kate version and probably so does the Kenzo one.
Edit: You may want to add this: https://www.aliexpress.com/item/LCD...ote-3-Pro-Note3-Pro-Prime-SE/32815691278.html
It's a full display already glued into its frame for the same price as without frame.

 

[iakoboss7]

@iakoboss7: I guess that the usb/power board is the same for Kate and Kenzo.
I can assure that the Redmi Note 2 3G ear speaker fits the Kate version and probably so does the Kenzo one.

it is different, it has different chips and also more antenna pads, here someone explains it perfectly.
https://www.reddit.com/r/Xiaomi/comments/5ivbh1/help_redmi_note_3_se_usb_port/

 

[Kiwironic]

Incredible. Thank you very much for your effort! @iakoboss7: I guess that the usb/power board is the same for Kate and Kenzo.
I can assure that the Redmi Note 2 3G ear speaker fits the Kate version and probably so does the Kenzo one.

Thanks mate, and yeah I believe they use the same Charging board as there is no reason for it to be different but again I am not sure.

Edit: You may want to add this: https://www.aliexpress.com/item/LCD...ote-3-Pro-Note3-Pro-Prime-SE/32815691278.html
It's a full display already glued into its frame for the same price as without frame.

Yep, thanks for that. I will edit the main post. I always tick the "Free shipping" option which was not the best in this case :laugh:

 

[Kiwironic]

it is different, it has different chips and also more antenna pads, here someone explains it perfectly.
https://www.reddit.com/r/Xiaomi/comments/5ivbh1/help_redmi_note_3_se_usb_port/

Try sending a message to this seller:
https://www.aliexpress.com/item/New...lgo_pvid=89dfa236-0a57-4699-8ad5-ceb51b6f8948

 

[iakoboss7]

Try sending a message to this seller:
https://www.aliexpress.com/item/New...lgo_pvid=89dfa236-0a57-4699-8ad5-ceb51b6f8948

sadly he does not answer.

 

[Kiwironic]

sadly he does not answer.

But you get the idea, right? just find a dealer who sells those on ebay and aliexpress and message them, they will get it for you and if they see demand they will even make it for you.

 

[jenio]

In europe stock

Here with stock in Europe.
24h for all europe!!

ebay search item number: 282512065107


in phonefactory dot es have with more discount

 

[mildiou13]

Hello.

Just to give you a feedback.
I ordered the screen of the Link 1 and unfortunately there is a touch calibration problem.
The touchpad seems to be out of sync. When you type G, you have V for example (a kind of 5mm difference on all the screen). If you type on the upper part of the letter it's ok but not for the bottom part.

I sent a message to the seller. I will tell you if he answers me.

-- EDIT
Ok, He answered me very quickly but I'm not really convinced

The first step:,please take off the Lcd from the phone .
The Second step lease use the clean cloth to clean the phone motherboard flex table.
The Second step lease install the Lcd again ,press and hold the power button to force a reboot.
And then the problems will be solved .

 

[Kiwironic]

Hello.

Just to give you a feedback.
I ordered the screen of the Link 1 and unfortunately there is a touch calibration problem.
The touchpad seems to be out of sync. When you type G, you have V for example (a kind of 5mm difference on all the screen). If you type on the upper part of the letter it's ok but not for the bottom part.

I sent a message to the seller. I will tell you if he answers me.

-- EDIT
Ok, He answered me very quickly but I'm not really convinced

Oh boy, sorry to hear. You have the protection of Paypal if you done payment with paypal, right?

 

[Kiwironic]

Thread Updated...

Still cannot find any usb/power board sorry @iakoboss7, again I would try to contact some of the sellers and ask them if they can source it.

 

[iakoboss7]

thank you for trying @Kiwironic , i tried but nothing

 

[mildiou13]

Oh boy, sorry to hear. You have the protection of Paypal if you done payment with paypal, right?

Yes, thank you Kiwironic for your tip. The problem is not the price, it's take the phone to pieces and assemble it again.

Anyone has tried this one with the frame ?

 

[Kiwironic]

Yes, thank you Kiwironic for your tip. The problem is not the price, it's take the phone to pieces and assemble it again.

Anyone has tried this one with the frame ?

Just follow the steps in this video:
https://www.youtube.com/watch?v=sjHMp9ayjak

The hardest part is getting the screen off the frame, you can use a hair drier and a suction cup to get them separated, or just order the LCD with frame and it should be much easier.

 

[Frenzi2012]

chargin board for kate 9mm?
http://www.cellspare.com/xiaomi-redmi-note-3-special-edition-charging-pcb-board-module

 

[iakoboss7]

this was never in stock (and also the picture is wrong).

 

[Asotos]

thank you for trying @Kiwironic , i tried but nothing

@iakoboss7, did you find a USB board after all? I need the exact same board myself, and not much has changed since August.

 

[iakoboss7]

sadly i couldnt find it so i bought a redmi note 4 global (at 110euro i couldnt resist).

i am still looking for it if anyone manages to locate it!