[PATCH]Greenbreadmod for Motorola 2.3.6 (5) roms + BL6 test only SOC camera

[walter79]

New GreenbreadMod for Motorola Android 2.3.6 roms, get your SOC (green) camera working.

based on GreenbreadMOD1.1 by Simplestas http://forum.xda-developers.com/showthread.php?t=1130656

It will only work if you never flashed a Android 2.3.6 full sbf.

!!! Install the patch which match best to your base rom !!!


First test (View attachment GreenBread-2.3.6-4.5.3-DPP-14-ramdisk.zip)

- 4.5.3-109-DPP-14 ramdisk
- 3.4.2-177 kernel (i don`t know why 3.4.2-179 did not work)

Test 2

- with 4.5.1-134-DFP-139 ramdisk (View attachment GreenBread-2.3.6-4.5.1-134-dfp-139-ramdisk.zip)

Test 3

- with 4.5.3-109-DPP-11 ramdisk (View attachment GreenBread-2.3.6-4.5.3-109-DPP-11-ramdisk.zip)

Test 4

- with 4.5.1-134-DFP-132 ramdisk (View attachment GreenBread-2.3.6-4.5.1-134-dfp-132-ramdisk.zip)

If battery did not work flash this: View attachment defyBattCM731octobre11.zip

Increase VSEL4/CLK4 in bootmenu overclock. default is 48/800Mhz


Test 5/6 Do not test if you have BL5 or lower

!! China Kernel !! Camera LED flash not tested !!

BL-6 tests

View attachment BL6-GreenBread-2.3.6-4.5.1-134-dfp-139-ramdisk+blurcamera.zip

View attachment BL6-GreenBread-2.3.6-4.5.1-134-dfp-132-ramdisk+blurcamera.zip

Test 7

- with 4.5.1-134-DFP-125 ramdisk ( View attachment GreenBread-2.3.5-4.5.1-134-dfp-125-ramdisk.zip)

Please test all patches and report.


TEST 1 did not work for everybody. If you got bootloop or no boot try test 2, 3 or 4

If you have camera app problems use attached BlurCamera.apk View attachment BlurCamera.apk

 

[wawroo]

so when i have nandroid of 2.3.6_4.5.2-109 DHT25 installed and i install GreenBread-2.3.6-china-ramdisk.zip and defyBattCM731octobre11.zip i would have eventually working camera on my green defy?

thanks very much, i definitely will try this.

 

[walter79]

so when i have 2.3.6_4.5.2-109 DHT25 installed and i install GreenBread-2.3.6-china-ramdisk.zip and defyBattCM731octobre11.zip i would have eventually working camera on my green defy?

On DHT25 it works. But only if you never flashed a 2.3.6. europe/china full sbf.

I tested on my MS2Ginger 3.0 NG - RC (based on DHT25) and it boots. Bayer camera works. SOC should work too.

 

[wawroo]

for me with dht-25 it does not work. nandroid without greenbread worked, after applying it stopped working, bootloop at motorola red M.

 

[walter79]

for me with dht-25 it does not work. nandroid without greenbread worked, after applying it stopped working, bootloop at motorola red M.

Could you test with my MS2Ginger 3.0 NG RC rom??

I will upload 2 new patches with different ramdisk.

 

[Cristi_10]

nice work man gona try it soon as i get home by installing a 2.3.6 nandroid then aplying your patches see whos working

 

[adi4motion]

question: should i boot in 2nd init or normal (stock)?
i ask this because after it initialises "2nd init" (the green led appears) system just resets

 

[Simplestas]

Uuh this is not GreenBreadMod 2.0. Just 1.1 with new ramdisk? That's not worth major version. And you don't use my work and my project name without mentioning me.

 

[walter79]

Uuh this is not GreenBreadMod 2.0. Just 1.1 with new ramdisk? That's not worth major version. And you don't use my work and my project name without mentioning me.

Different kernel.

I will rename it.

 

[adi4motion]

Different kernel.

I will rename it.

sorry but for me either of tests fails...same result (system reboots right after green led) tested on: MS2Ginger 3 and DHT25

 

[walter79]

sorry but for me either of tests fails...same result (system reboots right after green led) tested on: MS2Ginger 3 and DHT25

I found the problem.

For my first test i use differnet kernel.


I will upload new zips.

 

[wawroo]

so as it was said one more to test - 3.0 NG

 

[walter79]

New zip for flashing are online. please use the new files.

 

[adi4motion]

this is stranger than before:
test 1: now the led is on a loop (blue->green>off>blue>green>off)...
test 2 booting....

 

[walter79]

this is stranger than before:
now the led is on a loop (blue->green>off>blue>green>off)...

Which zip you used?

 

[adi4motion]

test 2 is working...i have video recording (not widescreen though)
i have camera preview...but when i take a photo i get wierd orizontal lines and the photo is not saved

---------- Post added at 04:44 PM ---------- Previous post was at 04:17 PM ----------

Test 1: Stuck on Red M logo (lights go: blue>greeen>off>blue>green....ect)
Test 2 & 3: Booting and working fine:
1.VGA video recording (not full screen)
2.Photo camera starts, takes picture but when it doesn't save it, instead it shows a greeny picture with horizontal lines)

 

[hackergnome]

test 2 is working...i have video recording (not widescreen though)
i have camera preview...but when i take a photo i get wierd orizontal lines and the photo is not saved

Maybe because of gb camera...

[Offtopic:Auto correct messed up FBI camera!
See again!! Gb=FBI!]

Sent from my MB525 using xda premium

 

[adi4motion]

Maybe because of FBI camera...

Sent from my MB525 using xda premium

FBI camera?!

 

[walter79]

test 2 is working...i have video recording (not widescreen though)
i have camera preview...but when i take a photo i get wierd orizontal lines and the photo is not saved

Use this camera.apk

 

[walter79]

test 2 is working...i have video recording (not widescreen though)
i have camera preview...but when i take a photo i get wierd orizontal lines and the photo is not saved

---------- Post added at 04:44 PM ---------- Previous post was at 04:17 PM ----------

Test 1: Stuck on Red M logo (lights go: blue>greeen>off>blue>green....ect)
Test 2 & 3: Booting and working fine:
1.VGA video recording (not full screen)
2.Photo camera starts, takes picture but when it doesn't save it, instead it shows a greeny picture with horizontal lines)

Which 2.3.6 rom you used for your test?