[PATCHER][APP][OFFICIAL] Dualboot For Samsung Galaxy for Tab S3
I am proud to present first Dualboot project For Samsung Galaxy Tab S3. This will allow any number of ROMs to be installed at the same time. It works by patching the secondary ROM's installation scripts and boot image to load the ROM files from an alternate location (/system/multiboot, /cache/multiboot, and /data/multiboot). Because of the way this is implemented, no changes to the primary ROM are necessary 
What is DualBootPatcher?
DualBootPatcher is an open-source app that allows multiple ROMs to be installed on a single Android device. It does its best to work with existing code and does not require explicit support from ROMs. There are currently 200+ supported devices and their variations.
Information:
It's awesome and useful for testing out roms or if you want, switching ROMS.
Disclaimer:
Requirements:
1. A Custom Recovery (TWRP)
2. A ROM
3. Dual Boot Patcher app and the DualBootUtilities.zip from the download section below.
What does the app do ?:
It patches...
What's supported ?
How to use the App?
- Download, install and open the app.
- Swipe to the right to open the menu. Click "ROMS". Now if this is the first time you use it, it will ask you if you want to set kernel. Do so!
- After it has finished go to ROM Settings (primary ROM 3 dot menu) and select Update Ramdisk. It will update it and will ask you to reboot. Press Reboot Now, or Reboot later.
- Now Download any ROM you like and open the app again and open the menu and open Patch Zip File from the menu. Ensure that your Device is set to (dreamlte) and under Partition configuration select secondary (will install 2nd ROM in /system) or data slot.
- Click continue and select where to save the patched file.
- You should see the file is being put in "Queue". Just click the confirm button to the upper right.
Note: If you want to go back, just swipe the ROM in queue to right and start over.
- The app will patch the zip. When done, go back to "ROMs".
- Click "Flash zip files" (the big pink button on the lower right). Click the pink plus button to add your previously patched zip file.
- Locate the file you have patched in step 7. Unless you have changed the name there, it should be something like ROM_name_partition_config_ID.zip (like RR-N-v5.8.3-20170707-dreamlte-Unofficial_dual.zip).
- Click on that file and choose "Keep location". Now confirm the flash with the button on the upper right side.
Note: You can also install the patched zip files in recovery.
- It will now open the terminal and begin flashing the file. This requires some patience. After it has flashed the file you'll see success message in green.
- Now click back and you should see your newly installed ROM along with the Primary ROM.
Note: You can find more options by clicking on the three buttons on each ROM.
- Now reboot and wait till finishing 2nd ROM first boot. install DualBootPatcher apk so you can easily switch ROMs, there is another way to change ROMs: flash DualBootUtilities.zip and switch ROM manually.
Note: Using Bootui:
- Open app then select settings and press install (update) bootui. then Swipe to the right to open the menu. Click "ROMS" again and open secondary ROM Settings) and select Update Ramdisk, Now you can change ROMs simply using boot ui (something like grub bootloader but it works like twrp)
Partitions Configurations:
The patcher offers several locations for installing ROMs:
How to boot to another ROM ?
This is simple ... There is no reboot to primary, secondary or whatever. So all you have to do is:
1) Go to ROMs section of the App.
2) Click on the ROM you want to boot to. You should see "Switching ROM" message. After few seconds, you should see a report message saying that "ROM successfully switched".
3) Now just do a normal reboot of your device. See the magic! It should boot to the ROM you have switched on step 2.
Note: You can find more options by selecting the three buttons on each ROMs (like creating reboot widgets for directly rebooting to specific rom).
You also need to install the App to all of the ROMs you install. Otherwise, you want be able to boot to other ROMs!
Apps and Data sharing:
To use app sharing, follow these steps in every ROM that you want to use app sharing: (doesn't work with JB ROMs)
Other How to ?
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".
Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.
Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.
Flash a mod or custom kernel for the primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.
Flash a mod or custom kernel for a non-primary ROM?
Just patch and flash it
Downloads:
Note: You can download any version since "9.3.0.r293.g94c5fb6e"
Screenshots:
No Screenshots available i need some
Sources:
DualBootPatcher: https://github.com/chenxiaolong/DualBootPatcher
DualBootUtilities: https://github.com/chenxiaolong/DualBootZips
Build instructions: https://github.com/chenxiaolong/DualBootPatcher/tree/master/docs
Samsung Galaxy Tab S3 Support: Commit
Known issues:
- You tell me !
Credits:
@chenxiaolong for the awesome DualBootPatcher.
@yshalsager for his Thread i copied I hope its ok [/CENTER]
XDA:DevDB Information
[PATCHER][APP][OFFICIAL] Dualboot For Samsung Galaxy for Tab S3, ROM for the Samsung Galaxy Tab S3
Contributors
schwabe93
Source Code: https://github.com/chenxiaolong/DualBootPatcher
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Created 2018-01-01
Last Updated 2018-01-01
What is DualBootPatcher?
DualBootPatcher is an open-source app that allows multiple ROMs to be installed on a single Android device. It does its best to work with existing code and does not require explicit support from ROMs. There are currently 200+ supported devices and their variations.
Information:
It's awesome and useful for testing out roms or if you want, switching ROMS.
Disclaimer:
Code:
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.1. A Custom Recovery (TWRP)
2. A ROM
3. Dual Boot Patcher app and the DualBootUtilities.zip from the download section below.
What does the app do ?:
It patches...
- Custom kernels for dual boot support
- ROMs so that they can be installed as secondary
- Google Apps packages for AOSP-based ROMs
- SuperSU so that it can be used in the secondary ROM
What's supported ?
How to use the App?
- Download, install and open the app.
- Swipe to the right to open the menu. Click "ROMS". Now if this is the first time you use it, it will ask you if you want to set kernel. Do so!
- After it has finished go to ROM Settings (primary ROM 3 dot menu) and select Update Ramdisk. It will update it and will ask you to reboot. Press Reboot Now, or Reboot later.
- Now Download any ROM you like and open the app again and open the menu and open Patch Zip File from the menu. Ensure that your Device is set to (dreamlte) and under Partition configuration select secondary (will install 2nd ROM in /system) or data slot.
- Click continue and select where to save the patched file.
- You should see the file is being put in "Queue". Just click the confirm button to the upper right.
Note: If you want to go back, just swipe the ROM in queue to right and start over.
- The app will patch the zip. When done, go back to "ROMs".
- Click "Flash zip files" (the big pink button on the lower right). Click the pink plus button to add your previously patched zip file.
- Locate the file you have patched in step 7. Unless you have changed the name there, it should be something like ROM_name_partition_config_ID.zip (like RR-N-v5.8.3-20170707-dreamlte-Unofficial_dual.zip).
- Click on that file and choose "Keep location". Now confirm the flash with the button on the upper right side.
Note: You can also install the patched zip files in recovery.
- It will now open the terminal and begin flashing the file. This requires some patience. After it has flashed the file you'll see success message in green.
- Now click back and you should see your newly installed ROM along with the Primary ROM.
Note: You can find more options by clicking on the three buttons on each ROM.
- Now reboot and wait till finishing 2nd ROM first boot. install DualBootPatcher apk so you can easily switch ROMs, there is another way to change ROMs: flash DualBootUtilities.zip and switch ROM manually.
Note: Using Bootui:
- Open app then select settings and press install (update) bootui. then Swipe to the right to open the menu. Click "ROMS" again and open secondary ROM Settings) and select Update Ramdisk, Now you can change ROMs simply using boot ui (something like grub bootloader but it works like twrp)
Partitions Configurations:
The patcher offers several locations for installing ROMs:
- Primary: This is normally used for installing a zip to the primary ROM. It is not required, but is strongly recommended because it has code to prevent the zip from inadvertently affecting other ROMs.
- Dual: Dual/Secondary is the first multiboot installation location. It installs to the system partition. This is a good spot for installing a second ROM because it doesn't take any space away from the internal storage.
- Multi-slots: There are 3 multislots: multi-slot-1, multi-slot-2, multi-slot-3. These install to the cache partition. This is specifically for devices, like the Galaxy S4, that have a massive cache partition.
- Data-slots: There can be an unlimited number of data slots. These install to the data partition and eat up space on the internal storage. This is useful for devices where the system partition is nearly full and the cache partition is tiny. These slots are named "data-slot-[id]", where "id" is something you provide in the app.
- Extsd-slots: There can be an unlimited number of extsd slots. These install to the external SD card, which is useful as it keeps the ROMs off of the internal storage. Note that the ROM's data files are still stored on the data partition.
How to boot to another ROM ?
This is simple ... There is no reboot to primary, secondary or whatever. So all you have to do is:
1) Go to ROMs section of the App.
2) Click on the ROM you want to boot to. You should see "Switching ROM" message. After few seconds, you should see a report message saying that "ROM successfully switched".
3) Now just do a normal reboot of your device. See the magic! It should boot to the ROM you have switched on step 2.
Note: You can find more options by selecting the three buttons on each ROMs (like creating reboot widgets for directly rebooting to specific rom).
You also need to install the App to all of the ROMs you install. Otherwise, you want be able to boot to other ROMs!
Apps and Data sharing:
To use app sharing, follow these steps in every ROM that you want to use app sharing: (doesn't work with JB ROMs)
- Install the app you want to share
- Open DualBootPatcher and go to "App Sharing" in the navigation drawer
- Enable individual app sharing
- Tap "Manage shared applications" and enable APK/data sharing for the app
- Reboot
Other How to ?
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".
Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.
Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.
Flash a mod or custom kernel for the primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.
Flash a mod or custom kernel for a non-primary ROM?
Just patch and flash it
Downloads:
Cheers ! we are officially supported
Note: You can download any version since "9.3.0.r293.g94c5fb6e"
Screenshots:
No Screenshots available i need some
Sources:
DualBootPatcher: https://github.com/chenxiaolong/DualBootPatcher
DualBootUtilities: https://github.com/chenxiaolong/DualBootZips
Build instructions: https://github.com/chenxiaolong/DualBootPatcher/tree/master/docs
Samsung Galaxy Tab S3 Support: Commit
Known issues:
- You tell me
!Credits:
@chenxiaolong for the awesome DualBootPatcher.
@yshalsager for his Thread i copied
I hope its ok [/CENTER]XDA:DevDB Information
[PATCHER][APP][OFFICIAL] Dualboot For Samsung Galaxy for Tab S3, ROM for the Samsung Galaxy Tab S3
Contributors
schwabe93
Source Code: https://github.com/chenxiaolong/DualBootPatcher
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Created 2018-01-01
Last Updated 2018-01-01
