A
AndroidSlave
Guest
TO ANYONE READING THIS POST - NOTE THAT THIS IS ALL SPECIFIC TO UOGRADING FROM GINGERBREAD ONLY
@onetonnoodle Honestly, if you like the features of Sweet Rom, it is an Amazing rom (maybe the best?), but I personally (when I use touchwizz interface) prefer a stock interface, which is why I like @ThaiDai's stock-deodexed LT9. If you were thinking of sweet rom, just go with it. It really is spectacular and constantly updated. Just be aware you may issue a couple bugs here and there because it is in constant development, but they always get fixed right away.
Regarding hardbricking, as long as your only doing wipes while PhilZ kernel is installed, you are safe. Remember anytime a new rom is flashed it overwrites the kernel with whatever is packaged with that rom.
There are 3 ways that I would do it. Obviously, there are about 100 ways to do this. These are the methods I may use
IF ITS GINGERBREAD COMPATIBLE (I dont remember), the Mobile Odin Pro method is by far the easiest way
Here is one Method (easier, but only if u have pc odin setup):
1. Flash Sweetrom via PC odin
2. it wont boot because of all your old gingerbread data. After turning it on, immediately boot to recovery. Do a factory reset, or if you want a completely clean install do a full wipe and then reflash sweetrom again via recovery.
3. reboot to system
4. YOU WILL HAVE A YELLOW TRIANGLE. Use Triangle Away from XDA (its free) to remove that, but this does have a risk.
Mobile Odin Method this would be my first choice so long as your GB rom is rooted
I think mobile odin is compatible with gingerbread. You will have to download sweet rom to your phone.
If it is, you can use mobile odin to flash the sweetrom zip, you are already on gingerbread so you are brickbug safe...
If mobile odin is gingerbread compatible, which i believe it is, this is really a simple method.
Obviously your gingerbread ROM has to be rooted if you want to do this.
NOTE: you will get issues because mobile odin doesnt really do a full wipe. if hte issues do arise you can reboot to recovery included with sweet rom and just do a factory reset and you will be fine.
Here is yet another method to update:
1. Open the browser ON YOUR PHONE. *(a) Download SweetRom to the sdcard (internal or external); (b) Download the newest LT9 Philz kernel to your sdcard also.
* **Note: if you have issues getting the download to complete, try opera mini browser because it supports resume downloads.
2. [OPTIONAL STEP, not required] Flash Abyss 4.2 kernel, and do a full nandroid backup in recovery... * I personally would skip this step. *I dont even know if you could find abyss anymore, but I am making an option for you to get a nandroid backup of your gingerbread rom that will boot... *really though, dont waste your time on this unless you want to assure you have a full backup of gingerbread with a gingerbread kernel
3. *Unfortunately, you can't flash philz directly from your 3e recovery (because you are on gingerbread)... it will give a signature verification error. *so you can either flash it via PC odin, or do an OTA upgrade and then flash it (be careful, once you do this you are not brickbug safe).
4. Flash PhilZ LT9 Kernel from either Abyss if you did step 2 (optional), from your stock android recovery if you can put it on your external sd card *only if you did an OTA update , or via PC Odin if you dont have an external SD Card. *Be sure to follow the philz flashing instructions step by step.
5. NOW YOUR PHONE WILL NOT BOOT. dont be alarmed, you only want to go to recovery. *You will have no issue getting into recovery as long as philz flashed properly. *Your phone now has a JB kernel with a GB system, this is why it won't boot.
6. boot recovery (power - volume up - home held until you get to philz touch interface)
7. Go to factory reset, and choose the wipe all option (this wipes /system /data /cache /preload and .android_secure). *Your phone now has no system, but will retain the philz kernel and touch recovery.
8. no need to reboot recovery. *Just go to flash the Sweet ROM Zip. *let it run.*
9. reboot to system
10. Done. *it will already include the kernel.
If you are confused about any step, dont even start the process. ask first.
And be aware, there is always a risk doing this. It won't brick your phone, but you may softbrick it and lose recovery if something goes wrong. The solution for this is to use PC Odin and flash a ROM via PC Odin.
---------- Post added at 09:08 AM ---------- Previous post was at 08:35 AM ----------
I can't believe I wrote a novel. Got a little too into it.
Sent from my GT-N7000 using Tapatalk 2
@onetonnoodle Honestly, if you like the features of Sweet Rom, it is an Amazing rom (maybe the best?), but I personally (when I use touchwizz interface) prefer a stock interface, which is why I like @ThaiDai's stock-deodexed LT9. If you were thinking of sweet rom, just go with it. It really is spectacular and constantly updated. Just be aware you may issue a couple bugs here and there because it is in constant development, but they always get fixed right away.
Regarding hardbricking, as long as your only doing wipes while PhilZ kernel is installed, you are safe. Remember anytime a new rom is flashed it overwrites the kernel with whatever is packaged with that rom.
There are 3 ways that I would do it. Obviously, there are about 100 ways to do this. These are the methods I may use
IF ITS GINGERBREAD COMPATIBLE (I dont remember), the Mobile Odin Pro method is by far the easiest way
Here is one Method (easier, but only if u have pc odin setup):
1. Flash Sweetrom via PC odin
2. it wont boot because of all your old gingerbread data. After turning it on, immediately boot to recovery. Do a factory reset, or if you want a completely clean install do a full wipe and then reflash sweetrom again via recovery.
3. reboot to system
4. YOU WILL HAVE A YELLOW TRIANGLE. Use Triangle Away from XDA (its free) to remove that, but this does have a risk.
Mobile Odin Method this would be my first choice so long as your GB rom is rooted
I think mobile odin is compatible with gingerbread. You will have to download sweet rom to your phone.
If it is, you can use mobile odin to flash the sweetrom zip, you are already on gingerbread so you are brickbug safe...
If mobile odin is gingerbread compatible, which i believe it is, this is really a simple method.
Obviously your gingerbread ROM has to be rooted if you want to do this.
NOTE: you will get issues because mobile odin doesnt really do a full wipe. if hte issues do arise you can reboot to recovery included with sweet rom and just do a factory reset and you will be fine.
Here is yet another method to update:
1. Open the browser ON YOUR PHONE. *(a) Download SweetRom to the sdcard (internal or external); (b) Download the newest LT9 Philz kernel to your sdcard also.
* **Note: if you have issues getting the download to complete, try opera mini browser because it supports resume downloads.
2. [OPTIONAL STEP, not required] Flash Abyss 4.2 kernel, and do a full nandroid backup in recovery... * I personally would skip this step. *I dont even know if you could find abyss anymore, but I am making an option for you to get a nandroid backup of your gingerbread rom that will boot... *really though, dont waste your time on this unless you want to assure you have a full backup of gingerbread with a gingerbread kernel
3. *Unfortunately, you can't flash philz directly from your 3e recovery (because you are on gingerbread)... it will give a signature verification error. *so you can either flash it via PC odin, or do an OTA upgrade and then flash it (be careful, once you do this you are not brickbug safe).
4. Flash PhilZ LT9 Kernel from either Abyss if you did step 2 (optional), from your stock android recovery if you can put it on your external sd card *only if you did an OTA update , or via PC Odin if you dont have an external SD Card. *Be sure to follow the philz flashing instructions step by step.
5. NOW YOUR PHONE WILL NOT BOOT. dont be alarmed, you only want to go to recovery. *You will have no issue getting into recovery as long as philz flashed properly. *Your phone now has a JB kernel with a GB system, this is why it won't boot.
6. boot recovery (power - volume up - home held until you get to philz touch interface)
7. Go to factory reset, and choose the wipe all option (this wipes /system /data /cache /preload and .android_secure). *Your phone now has no system, but will retain the philz kernel and touch recovery.
8. no need to reboot recovery. *Just go to flash the Sweet ROM Zip. *let it run.*
9. reboot to system
10. Done. *it will already include the kernel.
If you are confused about any step, dont even start the process. ask first.
And be aware, there is always a risk doing this. It won't brick your phone, but you may softbrick it and lose recovery if something goes wrong. The solution for this is to use PC Odin and flash a ROM via PC Odin.
---------- Post added at 09:08 AM ---------- Previous post was at 08:35 AM ----------
I can't believe I wrote a novel. Got a little too into it.
Sent from my GT-N7000 using Tapatalk 2
Last edited:
