Phone starts only in "downloading mode"

[dippaolo]

Hello

My phone starts only in "downloading mode".

My phone: Galaxy Note 8 SM-N950F
Downloaded firmware: N950FXXS8DSK5/N950FOXM8DSK1/N950FXXS8DSK1/N950FXXS8DSK5

I had root. I switched OEM and the phone has not started. I decided to upload the original software but Odin stopped and showed an error. Since then, the phone starts only in downloading. Take a look at the pictures ... this downloading is not normal:
attachment "myphone.jpg"

there is no information as during normal uploading:
attachment: "normal.jpg"

I cannot turn off the phone with the power button. I can only reset by holding VolUP and Power. After restart I have a black screen, I can't turn on the phone. The phone starts automatically after about 1 hour in Downloading mode.

Odin shows:

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1401)..
<ID:0/011> File analysis..
<ID:0/011> Total Binary size: 6116 M
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

 

[dippaolo]

Attachments have not been added

 

[stonedpsycho]

Attachments have not been added

I can't find any help on this with Google!

Have you tried flashing TWRP again? Then you could try flashing a rom, so at least you have a working device for now.

 

[dippaolo]

YES. When uploading TWRP, Odin stops at:
Odin ver 3.12, 3.13, 3.14.
TWRP ver 3.2.1.0,

<ID:0/011> Added!!
<ID:0/011> Odin engine v(ID:3.1203)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

 

[stonedpsycho]

YES. When uploading TWRP, Odin stops at:
Odin ver 3.12, 3.13, 3.14.
TWRP ver 3.2.1.0,

I wish I knew how to help you further. Keep bumping the thread in a hope that someone more knowledge knows what to do. :fingers-crossed:

 

[dippaolo]

Correction. Not VOLUP + POWER, but the phone only reacts to VOLDOWN + POWER.

The phone only responds to the VOLDOWN + POWER button
The phone does not respond to the POWER button.
Maybe it is worth disconnecting the phone and wait until the battery runs out ...

 

[markooo83]

Flash the correct PIT file with odin and it will work again..had the same issue and it worked for me without loosing data

 

[dippaolo]

Should I unpack the PIT file from CSC?

 

[markooo83]

Should I unpack the PIT file from CSC?

Yes or you download only the pit file