Question Pixel 6 Pro screen protector

Search This thread

mkhcb

Senior Member
Nov 2, 2012
341
355
No regular tempered glass that will work with fingerprint sensor that I know of. Just take your time, cover the openings and you should be fine.
This may sound silly but I got the Whitestone dome in February and, after all this time, I still haven't installed it. I watched the installation video several times but some comments kinda scare me! Like what if I screw up and mess up the phone by having LOCA everywhere?! (like in the ear piece)

I guess there's still no regular tempered glass for the P6P that works with the fingerprint sensor?

This works well, "full glue"... I also bought some from AliExpress as backup. I'll let you know how they are when I get them. The AliExpress should be the same as the ebay one but cheaper. So lets see
 

thedarkmunk

Senior Member
Dec 9, 2010
175
40
The whitestone dome is available for the P6Pro.
I've been using it for months and it's flawless; sure it's expensive but you get what you pay for; amazon normally has it on some kind of sale, and whitestone directly normally always have some kind of promo code.

I've used the Whitestone on 5 previous Samsung phones, and now my Pixel; can't fault it.
 

foobar66

Senior Member
Jan 8, 2011
2,101
2,173
Brussels
Google Pixel 6 Pro
The whitestone dome is available for the P6Pro.
I've been using it for months and it's flawless; sure it's expensive but you get what you pay for; amazon normally has it on some kind of sale, and whitestone directly normally always have some kind of promo code.

I've used the Whitestone on 5 previous Samsung phones, and now my Pixel; can't fault it.
I have also purchased a Whitestone Dome ...
Had a few minor scratches on my screen (phone had fallen outside on the terras) and wanted to see if that protector would hide them.

Watched the installation video 5 times. Looked daunting.

Luckily the package came with 2 protectors ;-)

First installation completely failed. The glue is supposed to spread evenly over the screen after putting the glass protector but spilled over onto the right side. I pulled off the glass and then had to spend 1 hr to remove all the glue with aceton.

Second install I made sure that the glue was initially right in the middle of the screen, then put the protector and then the glue spread evenly under the protector and covered all surface under the glass. After putting the UV light then just had to wipe the edges of the phone.

But the final result is flawless. The screen looks like brand new (the small scratches are no longer visible). There is no color/intensity degradation.

Also the fingerprint is still working fine.
So happy with the result.
Paid 44 euro (for 2 protectors) but worth it.

Wife commented: Now your phone looke like brand new ... no need for Pixel 7 for you ;-/ ... so I will have to wait for Pixel 8
 

Top Liked Posts

  • There are no posts matching your filters.
  • 7
    Well, I don't carry diamonds in my pocket. Keys, yes; a lighter maybe based on the party. :)

    The LK TPU protector mentioned a few times is the bomb. After a day, I can't tell it is on the screen. Finger glides across just fine. FPR works fine. No blur. Easy installation.
    7
    Why? It blows my mind...
    Thanks for confirming my suspicion that I would want to add you to my ignore list.
    6
    Bought last week this one https://m.de.aliexpress.com/item/10...er_id=c48d9edf02c84f368fef07df4672e3c5&is_c=N

    It works flawless,feels also really good and it works with the fingerprint reader.
    It's maybe a millimeter or a half to small but that's okay
    Here a small video how it works with the fingerprint reader.
    6
    I have ordered the same about a week or 2 ago and am awaiting its arrival. Think I posted about it in another screen protector thread and not this one (hard to keep up with all the different threads 😜). I will also report back on how it goes when it arrives.
    Ended up ordering these. They should be here by the end of the week. I'll let you guys know how it goes.

    [3+2 Pack] for Google Pixel 6 Pro Screen Protector [Support Fingerprint Unlocking] 3x 3D Curved Tempered Glass and 2x Camera Lens Protector for Pixel 6 Pro 5G https://www.amazon.com/dp/B09LDF5C8...abc_2MBCCWPCD3GZPJDNV7Y0?_encoding=UTF8&psc=1
    Ok, got the screen protectors today. Things went fairly well except for 1 very tiny bubble that is barely noticeable so I went with it.

    I followed the instructions in the video provided by a QR code for the most part. The video is for another phone so I just ignored the part about removing the fingerprint sticker as there isn't one on this protector. I also did not use a weight. Not sure if that would have helped with that 1 very tiny bubble or not.

    Instead of using their stickers to cover up the speakers, etc., I used electrical tape. That stuck much better than the provided stickers. Covered up both top and bottom speakers, volume buttons and sim card tray.

    The tray is pretty nice. It really leveled out the phone so no problem with the camera bar. Inserted the provided foam cushions on 3 of the sides and the phone fit very snug and well in there.

    The protector fit fairly well also. It's a bit smaller than the actual screen (similar to all the other ones I've tried), but that allows it to not interfere with a case coming on or off (in my case Spigen Tough Armor). With the case on it's pretty much covering everything exposed.

    Front facing camera is working fine. Touch is working fine.

    And the fingerprint sensor? Well, that is working fine as well 😀. Am finally able to use it (been using a non-LOCA TGSP so haven't been able to use it till now). I enrolled both thumbs and so far each time the sensor has worked and fairly quickly. Only enrolled each thumb once. (Btw, checked to see if any of my other non-enrolled fingerprints could unlock it as has been reported a bit and they could not.)

    So in conclusion, based on my experience alone, I would recommend this protector. It comes with 3 screen protectors and 2 camera protectors (which I did not use). Also comes with 3 "bottles/viles" of LOCA, 2 sets of absorption cushions for the sides, 5 packs of wet/dry cloths and stickers, tray, and a UV light.

    All in all I'm pretty happy with it so far (it's only been about an hour since installation). Now just need to run that adb command so each time I touch the phone the screen doesn't wake 🙃.
    5
    Just this morning this chick was standing next to me on the train and she had a phone with on-scree fingerprint reader and a screen protector. It looked ugly as ѕhit, because there was a hole for the fingerprint.

    I haven't used screen protectors in years now. I just don't put my phone in the same pocket as keys and it's good as new.