Development PIXEL EXPERIENCE-PLUS FOR PIXEL 5A ANDROID 12 - AUG. 13, 2022

Search This thread

[email protected]

Senior Member
Feb 6, 2017
120
11
I can't open latest build
1654613423608.png
 
Last edited:

TheSayaMan

Senior Member
Sep 12, 2016
453
204
is your build based off 12.1.0_r8 ?
I use the same repository located on GitHub. The security patches are still from last month, May. They haven't been updated yet. I will update them myself if not updated soon. I'll have to pull it from stock and it requires more work. Since I work a lot, I'll do it when I get a chance. It's not extensive, so I should be able to apply it on next full update Thursday.
 

rchris494

Senior Member
May 7, 2011
226
55
yeah they are super slow to update their github. that is why i asked if you were manually updating it yourself to the latest.
 

Trench6729

Member
May 31, 2022
11
0
1) Correction to instructions: The fastboot command is missing a hyphen......"fastboot --set active=b" so it won't run. It should be "fastboot --set-active=b" (y)

2) Screenshot doesn't work with powerbutton + volume down. I ended up installing the Screenshot Tile app from F-Droid to work around this issue as it seems to function fine by going into Android's Quick Settings. https://f-droid.org/en/packages/com.github.cvzi.screenshottile/ Anyone else have the screenshot powerbutton+volumn down not working?

3) I am not able to use NFC for payments, the message I get is "Your phone doesn't meet security standards" Any way to fix this? Play Store works fine. My phone is still unlocked when I go into the bootloader. Can I re-lock it to fix the NFC payments (Google Pay) problem? How would I do that?
 
Last edited:

TheSayaMan

Senior Member
Sep 12, 2016
453
204
1) Correction to instructions: The fastboot command is missing a hyphen......"fastboot --set active=b" so it won't run. It should be "fastboot --set-active=b" (y)

2) Screenshot doesn't work with powerbutton + volume down. I ended up installing the Screenshot Tile app from F-Droid to work around this issue as it seems to function fine by going into Android's Quick Settings. https://f-droid.org/en/packages/com.github.cvzi.screenshottile/ Anyone else have the screenshot powerbutton+volumn down not working?

3) I am not able to use NFC for payments because it says my phone isn't secure. My phone is still unlocked when I go into the bootloader. Can I re-lock it to fix the NFC payments (Google Pay) problem? How would I do that?
I don't recommend locking bootloader on custom ROMs because if anything goes wrong, you can't flash anything with it being locked. I would flash back to stock, then re-lock. You can always unlock again later if needed.
 

Trench6729

Member
May 31, 2022
11
0
Looks like you didn't upload an OTA update this time. Will OTA update method be provided in the future? Can we update from the full ROM without losing data?
 
Last edited:

TheSayaMan

Senior Member
Sep 12, 2016
453
204
Looks like you didn't upload an OTA update this time. Will OTA update method be provided in the future? Can we update from the full ROM without losing data?
There is no OTA available because this is today's full ROM install. If your already on this ROM, all you have to do is sideload this update on the inactive or opposite slot per the directions. Another OTA will be available tomorrow or Friday. Not sure yet.
 

pawlik79

Senior Member
Jan 27, 2020
83
13
That would be great and i would be very thankful! I have tried custom kernel but unfortunately it doesn't have that option and battery charger limit apk which not supported for our device.
 
Last edited:

TheSayaMan

Senior Member
Sep 12, 2016
453
204
1) Correction to instructions: The fastboot command is missing a hyphen......"fastboot --set active=b" so it won't run. It should be "fastboot --set-active=b" (y)

2) Screenshot doesn't work with powerbutton + volume down. I ended up installing the Screenshot Tile app from F-Droid to work around this issue as it seems to function fine by going into Android's Quick Settings. https://f-droid.org/en/packages/com.github.cvzi.screenshottile/ Anyone else have the screenshot powerbutton+volumn down not working?

3) I am not able to use NFC for payments, the message I get is "Your phone doesn't meet security standards" Any way to fix this? Play Store works fine. My phone is still unlocked when I go into the bootloader. Can I re-lock it to fix the NFC payments (Google Pay) problem? How would I do that?
Screenshot doesn't work that way even with stock. You need to swipe up from the bottom of the screen and you will then get a popup in the bottom center that says screenshot. Click that and it will take a screenshot.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6
    August security patch.

    You MUST be on Android 12 to use this!!!!!

    If your not, you must flash any Google factory image for Android 12 barbet.

    Your bootloader must also be unlocked to install custom firmware.

    To do this, reboot to bootloader and type the following: fastboot flashing unlock

    The custom kernel of this ROM hides the unlocked bootloader. The device will pass Safetynet and the Play Store will report the device as certified. Based on this, root, magisk and the modules are not needed to pass device certification.

    This is based on the Android Open Source Project. It includes various proprietary hardware-specific code.

    All the source code is available in the Github repo here.

    Basic requirements​

    1. Read through the instructions at least once before actually following them, so as to avoid any problems due to any missed steps!
    2. Make sure your computer has adb and fastboot. Setup instructions can be found here.
    3. Enable USB debugging on your device.

    Thanks go to Github and Pixel Experience for their source code and device specific code. I couldn't have built this without it!!!

    The ROM uses the Pixel Experience source code, device specific code. I made other minor changes and used compression to lower the file size of the ROM, creating more space in the internal storage with minor reduction in performance. Updated every week with minor changes.

    GAPPS ARE ALSO INCLUDED WITH THIS ROM

    DO NOT DOWNLOAD OR FLASH GAPPS ON THIS ROM!!!!!

    DOWNLOAD BOOT, VENDOR_BOOT & ROM HERE

    #1 REBOOT TO BOOTLOADER

    #2 FACTORY RESET: fastboot -w

    #3 FLASH VENDOR_BOOT & BOOT:
    fastboot flash --slot all vendor_boot vendor_boot.img
    fastboot flash --slot all boot boot.img


    #4 REBOOT TO RECOVERY THEN ADB SIDELOAD
    adb sideload PE-Plus-barbet-12.1-20220813-UNOFFICIAL.zip

    #5 REBOOT TO SYSTEM

    #6 REBOOT TO RECOVERY AGAIN IF YOU WISH TO ROOT AND ADB SIDELOAD
    adb sideload magisk.apk

    #7 REBOOT TO SYSTEM

    Screen call and Google assistant works.

    If you are already on this ROM, you can dirty flash updates without wiping data. Simply set to inactive slot in bootloader. Reboot to bootloader and see what active slot is and set to opposite. Example: fastboot --set-active=a

    Then repeat all steps except #2

    DO NOT DIRTY FLASH THIS ROM WITH THE OFFICIAL ONE LOCATED ELSEWHERE. I USE DIFFERENT SECURITY KEYS AND YOU WILL BOOTLOOP. YOU MUST WIPE WHEN COMING TO THIS ROM THE FIRST TIME!!!
    2
    I saw that for other roms it is in requirements, and generally for every ROM flashing. And I was like if you invented some magic that would be nice :D
    Unfortunately not but I do hide the unlocked bootloader with this, so it still acts as a unmodified device. Banking apps and Google pay works without root. The only thing I noticed that doesn't work is sports gambling apps if anyone even cares.
    2
    Twrp removed as part of install process. vendor_boot and boot supplied as part of install process. August security update patch will be in next update.
    2
    is your build based off 12.1.0_r8 ?
    I use the same repository located on GitHub. The security patches are still from last month, May. They haven't been updated yet. I will update them myself if not updated soon. I'll have to pull it from stock and it requires more work. Since I work a lot, I'll do it when I get a chance. It's not extensive, so I should be able to apply it on next full update Thursday.
    2
    After some reading about it here is a hint that you probably already now :)
    Newer Android devices' bootloaders pass a verified boot flag to the kernel. This means that if the bootloader is unlocked, it sends that flag, and the kernel listens to it then SafetyNet will fail. And solution is to patch your kernel to ignore the flag :)
    I am working on it. Hopefully the next update. Thanks.