• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

General Pixel Experience Plus v11

Search This thread

vctrmtlnd

Senior Member
Jul 26, 2016
57
17
Two days after flashing PE v310, the fingerprint sensor stopped working for me ("fingerprint hardware not available") and face unlock is greyed out in the security settings. Is anyone else experiencing this issue?

I was on the Xiaomi.eu 12.5.2 ROM/firmware prior to coming over to PE.

If it's isolated to me, this may very well be a hardware problem which would be a shame considering that there aren't any Xiaomi service centers for the Xiaomi Mi 11 Lite 5G in the US.
 

paatha13

Senior Member
Jul 27, 2016
2,105
816
Athens
I'm not working fingerprint at all but if on miui worked fine and no on PE build installed so sure is software issue of the PE.

Btw I'm on the yesterday PE plus build.

Maybe should flash this and better use 12.5.3 as base miui rom like I did and not the oldest one used and try yourself if fingerprint works or no.
 

vctrmtlnd

Senior Member
Jul 26, 2016
57
17
@paatha13 Are you able to test if your fingerprint sensor works, using one of the fingerprint sensor test apps?

As an aside, I tried updating to 12.5.3 firmware, and flashing all of the .img files was successful except for the modem.img, which is a little odd. No change to the fingerprint sensor. I'm starting to think that the hardware failed and I may need to replace the phone itself.

Code:
$ fastboot flash modem_a firmware-update/modem.img
Sending 'modem_a' (188588 KB)                      OKAY [  6.841s]
Writing 'modem_a'                                  FAILED (remote: 'No such file or directory')
fastboot: error: Command failed
 

paatha13

Senior Member
Jul 27, 2016
2,105
816
Athens
@paatha13 Are you able to test if your fingerprint sensor works, using one of the fingerprint sensor test apps?

As an aside, I tried updating to 12.5.3 firmware, and flashing all of the .img files was successful except for the modem.img, which is a little odd. No change to the fingerprint sensor. I'm starting to think that the hardware failed and I may need to replace the phone itself.

Code:
$ fastboot flash modem_a firmware-update/modem.img
Sending 'modem_a' (188588 KB)                      OKAY [  6.841s]
Writing 'modem_a'                                  FAILED (remote: 'No such file or directory')
fastboot: error: Command failed
Works fine, accurate and reliable 1 hour now that setup it.

Edit: after using couple of hours it works brilliantly, fast and accurate.

Only time does not work is if you wet your hands with drink or sea water, you need to dry your hands and wait 1-2 minutes to recover natural moisture.
 
Last edited:

arnuvi

Member
Dec 29, 2017
7
0
To be claim, i am NOT the maintianer.

Today, i want to share a GSI for every use of this phone and try to give everyone the lightest feeling of system to match the weight of this phone. So after hunders of fastboot flash, i succeesfully boot in system after flash, hope everyone can try and if any issue, you can commit this thread or pull a issue to this gsi github.

CLICK Guthub TO DOWNLOAD the "PixelExperience_Plus_arm-ab-11.0-xxxxxxxx-UNOFFICIAL.img.xz"

Three steps to flash:
1,Backup all your data and unzip the file you downloaded from github BTW.
2,If you want to get Magisk, flash Magisk before you flash PE. Without flash new bootimg, Magisk will be permanent.(option)
2,connect to computer and use command <adb reboot fastboot> or press vol- and power to rebbot to the fastboot mode.
3,use command<fastboot flash system xxx.img> to flash PEPlus, <fastboot reboot> to boot into system.

BTW, I am the people who are not native speakers of English, so if i use some wrong word, just let it go if didn't confuse you.

Hope you success.

If feedback of this rom is good, i will base on it to maintain the ROM that only for Mi11 Lite.
es la mejor rom que he probado 0 bugs, se corrige el problema de pantalla black crush, fluides extrema 0 lag.

----------

MOD EDIT: English Translation Below

It is the best rom I have tried 0 bugs, it fixes the black crush screen problem, extreme fluidity 0 lag.
 
Last edited by a moderator:
Mar 31, 2011
21
5
Vctrmtlnd 5g works fine?
Paatha13 not recording. Screening is when you have an incoming call. And between accept and decline it says screen. And it plays an automated message there you are using Google call screening and once the other person talks you see a transcript of it and if it's a robo call you just got hang up.
 

KevMetal

Senior Member
Nov 11, 2016
1,608
619
Amazon Fire TV
Amazon Fire HD 6 and 7
I boot treble image CAOS android 11 .. not so bloated .. IR blaster and everything working .. 0 bugs ..plus includes dynamic supersu ( can enable and disable )
IMG_20210727_230106_330.jpg
IMG_20210727_230132_922.jpg
 

KevMetal

Senior Member
Nov 11, 2016
1,608
619
Amazon Fire TV
Amazon Fire HD 6 and 7
Ok I'm trying to make a guide for flashing gsi correctly on Renoir with list and screenshot of gsi that is booting and how to root gsi with magisk and su and how apply different fixes and patches ... But I'm also working and have limited time .. but I'm trying ..in the global chat of telegram I can help people in chat with quick basic instructions but obviously it won't include everything
 

paatha13

Senior Member
Jul 27, 2016
2,105
816
Athens
Ok I'm trying to make a guide for flashing gsi correctly on Renoir with list and screenshot of gsi that is booting and how to root gsi with magisk and su and how apply different fixes and patches ... But I'm also working and have limited time .. but I'm trying ..in the global chat of telegram I can help people in chat with quick basic instructions but obviously it won't include everything
Used same method installation like PE

But rom has the same bugs like PE Plus has.
1.DT2W does not work
2. Phone operates at 60hz only
3.Same sound bug like on PE and need the bellow workaround for temporary fix
and the worst part if use the temporary sound bug fix,brightness get broken and is always stuck at 100% and slider not working used either auto brightness either manual,only factory reset phone fix it.
4.In order pc to recognized as external storage need to disable usb debugging.
 

Attachments

  • Screenshot_20210729-123350_Settings[1].png
    Screenshot_20210729-123350_Settings[1].png
    137.8 KB · Views: 35
  • Screenshot_20210729-123427_Settings[1].png
    Screenshot_20210729-123427_Settings[1].png
    134.4 KB · Views: 35
  • Screenshot_20210729-123453_Settings[1].png
    Screenshot_20210729-123453_Settings[1].png
    149.1 KB · Views: 35
  • Screenshot_20210729-123435_Settings[1].png
    Screenshot_20210729-123435_Settings[1].png
    150.3 KB · Views: 34
  • Screenshot_20210729-123513_Settings[1].png
    Screenshot_20210729-123513_Settings[1].png
    172.4 KB · Views: 37
Last edited:

KevMetal

Senior Member
Nov 11, 2016
1,608
619
Amazon Fire TV
Amazon Fire HD 6 and 7
Used same method installation like PE

But rom has the same bugs like PE Plus has.
1.DT2W does not work
2. Phone operates at 60hz only
3.Same sound bug like on PE and need the bellow workaround for temporary fix
and the worst part if use the temporary sound bug fix,brightness get broken and is always stuck at 100% and slider not working used either auto brightness either manual,only factory reset phone fix it.
4.In order pc to recognized as external storage need to disable usb debugging.
No you can fix brightness bug .. my brightness working 100% Open termux and type....
su
Then give termux root access....

Then Type Two lines...
setprop persist.sys.qcom-brightness $(cat /sys/class/leds/lcd-backlight/max_brightness)

To fix headset detection
setprop persist.sys.overlay.devinputjack true

To fix garbled sound just disable audio effects

also furthermore the "guide" or method by Rayman is incomplete .. using this method some gsi won't boot ....

there is a longer method where you patch boot and also delete logical partition and patch vb meta img to disable verity correctly ..using this method you can boot more gsi

Rayman asked me on advice about root, twrp and booting gsi ... He doesn't explain everything for noobs and there is useful info for everyone about gsi In general ..

The more people who boot gsi the more we can ask devs to make patches by providing logs

We need to make a list of gsi that are working with bugs and how to fix ..because for example Rayman didn't explain how to patch for verity or how to run fix for brightness 🔆 in terminal

Nevermind fixing headset
 
Last edited:

paatha13

Senior Member
Jul 27, 2016
2,105
816
Athens
No you can fix brightness bug .. my brightness working 100% Open termux and type....
su
Then give termux root access....

Then Type Two lines...
setprop persist.sys.qcom-brightness $(cat /sys/class/leds/lcd-backlight/max_brightness)

To fix headset detection
setprop persist.sys.overlay.devinputjack true

To fix garbled sound just disable audio effects

also furthermore the "guide" or method by Rayman is incomplete .. using this method some gsi won't boot ....

there is a longer method where you patch boot and also delete logical partition and patch vb meta img to disable verity correctly ..using this method you can boot more gsi

Rayman asked me on advice about root, twrp and booting gsi ... He doesn't explain everything for noobs and there is useful info for everyone about gsi In general ..

The more people who boot gsi the more we can ask devs to make patches by providing logs

We need to make a list of gsi that are working with bugs and how to fix ..because for example Rayman didn't explain how to patch for verity or how to run fix for brightness 🔆 in terminal

Nevermind fixing headset
got error on this command but fix the brightness bug using bellow app have bought couple of months now
 

Attachments

  • Screenshot_20210729-133517[1].png
    Screenshot_20210729-133517[1].png
    113.2 KB · Views: 32

paatha13

Senior Member
Jul 27, 2016
2,105
816
Athens
What is the error .. just run the first part of command , not the part in ( brackets) I am glad you found good application for brightness but I prefer not paying for stuff whenever possible 😉
Thats what i did but got massage that something wrong on command,did it 2 times same error got,nevermind using the app solved the issue,i use actually that app on all my device because using the phone at nights want to minimize further the lower brightness.

Magisk all ok pass safety net also tick the option shows at sceenshot
 

Attachments

  • Screenshot_20210729-134123_Magisk[1].png
    Screenshot_20210729-134123_Magisk[1].png
    47.3 KB · Views: 25
  • Screenshot_20210729-134505_PhhTrebleApp[1].png
    Screenshot_20210729-134505_PhhTrebleApp[1].png
    143.5 KB · Views: 24
  • Screenshot_20210729-131326_Magisk[1].png
    Screenshot_20210729-131326_Magisk[1].png
    153 KB · Views: 25

paatha13

Senior Member
Jul 27, 2016
2,105
816
Athens
Back to PE Plus as was missing some customization option like saperate notification to ring volume,clock status bar posision i like to be on center,control playback with volume button had etc, also with the other rom did not had 4G+ only 4G.

Ok the second rom has less bloat but thats easy to uninstall.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Well I can't help any more as sold my 11 lite 5g and switch to OnePlus 8T.
  • 10
    To be claim, i am NOT the maintianer.

    Today, i want to share a GSI for every use of this phone and try to give everyone the lightest feeling of system to match the weight of this phone. So after hunders of fastboot flash, i succeesfully boot in system after flash, hope everyone can try and if any issue, you can commit this thread or pull a issue to this gsi github.

    CLICK Guthub TO DOWNLOAD the "PixelExperience_Plus_arm-ab-11.0-xxxxxxxx-UNOFFICIAL.img.xz"

    Three steps to flash:
    1,Backup all your data and unzip the file you downloaded from github BTW.
    2,If you want to get Magisk, flash Magisk before you flash PE. Without flash new bootimg, Magisk will be permanent.(option)
    2,connect to computer and use command <adb reboot fastboot> or press vol- and power to rebbot to the fastboot mode.
    3,use command<fastboot flash system xxx.img> to flash PEPlus, <fastboot reboot> to boot into system.

    BTW, I am the people who are not native speakers of English, so if i use some wrong word, just let it go if didn't confuse you.

    Hope you success.

    If feedback of this rom is good, i will base on it to maintain the ROM that only for Mi11 Lite.
    3
    Looks like there's a new build up as of 2021-06-19 (v309). For everyone receiving the "Partition not found" error, here is the solution to get the system image to flash.

    - Reboot to fastboot
    - From a terminal, type: fastboot reboot fastboot
    - The device should now be in FASTBOOTD mode. Note, the D after FASTBOOT!
    - Now, you can flash by typing the following at a terminal: fastboot flash system PixelExperience_arm64-ab-11.0-20210619-UNOFFICIAL.img
    - fastboot reboot recovery
    - Select format data
    - Reboot to system


    $ fastboot flash system PixelExperience_arm64-ab-11.0-20210619-UNOFFICIAL.img
    Resizing 'system_a' OKAY [ 0.004s]
    Sending sparse 'system_a' 1/14 (262140 KB) OKAY [ 10.507s]
    Writing 'system_a' OKAY [ 0.655s]
    Sending sparse 'system_a' 2/14 (262140 KB) OKAY [ 10.230s]
    Writing 'system_a' OKAY [ 0.582s]
    Sending sparse 'system_a' 3/14 (262140 KB) OKAY [ 9.928s]
    Writing 'system_a' OKAY [ 0.616s]
    Sending sparse 'system_a' 4/14 (262140 KB) OKAY [ 9.031s]
    Writing 'system_a' OKAY [ 0.617s]
    Sending sparse 'system_a' 5/14 (262140 KB) OKAY [ 8.220s]
    Writing 'system_a' OKAY [ 0.584s]
    Sending sparse 'system_a' 6/14 (262140 KB) OKAY [ 7.821s]
    Writing 'system_a' OKAY [ 0.595s]
    Sending sparse 'system_a' 7/14 (262140 KB) OKAY [ 8.438s]
    Writing 'system_a' OKAY [ 0.582s]
    Sending sparse 'system_a' 8/14 (262140 KB) OKAY [ 7.481s]
    Writing 'system_a' OKAY [ 0.615s]
    Sending sparse 'system_a' 9/14 (262140 KB) OKAY [ 8.163s]
    Writing 'system_a' OKAY [ 0.605s]
    Sending sparse 'system_a' 10/14 (262140 KB) OKAY [ 8.062s]
    Writing 'system_a' OKAY [ 0.582s]
    Sending sparse 'system_a' 11/14 (262140 KB) OKAY [ 7.877s]
    Writing 'system_a' OKAY [ 0.584s]
    Sending sparse 'system_a' 12/14 (262140 KB) OKAY [ 7.901s]
    Writing 'system_a' OKAY [ 0.615s]
    Sending sparse 'system_a' 13/14 (262140 KB) OKAY [ 8.012s]
    Writing 'system_a' OKAY [ 0.564s]
    Sending sparse 'system_a' 14/14 (151444 KB) OKAY [ 4.686s]
    Writing 'system_a' OKAY [ 0.386s]
    Finished. Total time: 124.552s

    I'm not sure if both system_a and system_b partitions need to be flashed. Maybe someone else with more experience with GSIs can chime in?
    1
    Hi, which version to download, a only or ab??? Is there a way to debloat it before flashing??? Does it wipe data???
    Thanks
    Download ab version.
    I don't think we con debolat it before flash
    And yes it will wipe all your data.
    1
    Thanks for your answer...what's the vndklite and is there advantage...I would like the more debloat, or with R/W....
    I did finding a way to get R/W according to patch the ROM without TWRP
    1
    Well I can't help any more as sold my 11 lite 5g and switch to OnePlus 8T.