Please Delete
THREAD MOVED: http://forum.xda-developers.com/xperia-j-e/development/zeus-kernel-stock-jb-xperia-e-t2822310
THREAD MOVED: http://forum.xda-developers.com/xperia-j-e/development/zeus-kernel-stock-jb-xperia-e-t2822310
Last edited:
Please Delete
- Thread starter UltraGamerHD
- Start date
-
- Tags
- development
- Status
this means ...there can be new roms with .23 as base and no bugs right?!
Yep no Bugs - WiFi Works!
@UltraGamerHD can you make more kenels with with mods like
1.3 ghz oc
more governors like smartass etc
just asking.....
---------- Post added at 01:10 PM ---------- Previous post was at 01:00 PM ----------
@MatsPunt over here! ....
1.3 ghz oc
more governors like smartass etc
just asking.....
---------- Post added at 01:10 PM ---------- Previous post was at 01:00 PM ----------
@MatsPunt over here! ....
Last edited:
What about governors like smartass and ondemandX? Also take a look in that vengeance kernel
1.1ghz or 1.2 ghz is enough.... In 1.3ghz normal messing around causes heating... (a good governor could fix it maybe)
Can we use acpuclock of CM10 in stock? Of different minor revisions?
Ok so I added SmartAssV2 and 1.3 GHz Overclock but I cannot get the Kernel to compile I get this error:
Code:
In file included from arch/arm/mach-msm/clock.c:27:
arch/arm/mach-msm/clock.h:184: warning: 'struct clk_init_data' declared inside parameter list
error, forbidden warning: clock.h:184
make[1]: *** [arch/arm/mach-msm/clock.o] Error 1
make: *** [arch/arm/mach-msm] Error 2
Can you show me the sources? Upload them to GitHub or something?
AWESOME! surely going to enjoy this!
Side note: how did you eventually managed to do it? I got stuck the whole time...
Mats
Sent from my C1505 using XDA Premium 4 mobile app
Side note: how did you eventually managed to do it? I got stuck the whole time...
Mats
Sent from my C1505 using XDA Premium 4 mobile app
I took the zImage and ramdisk.cpio from 11.3.A.2.23 and replaced them ones with the ones from jjm34's kernel the compiled using the script in the development section.
Sources are on Sony Website: http://developer.sonymobile.com/dow...es/open-source-archive-for-build-11-3-a-2-23/
CRAZYYY! Sorry 
but will this work on my e dual? Latest firmware (jellybean second update)
Thanks
Sent from my Sony Xperia E Dual
but will this work on my e dual? Latest firmware (jellybean second update)Thanks
Sent from my Sony Xperia E Dual
OK, but I guess you are supposed to upload a copy of the source of the kernel that you have built, (after modding) to GitHub or something, right?
Its easier to keep track of this project that way.
I never built it from source I extracted the elf file replaced the ramdisk and zImage from the stock kernel.sin and then compiled. I didn't build from source and I cannot get the kernel to compile if I wanted to build from source.
CRAZYYY! Sorry
Thanks
Sent from my Sony Xperia E Dual
I'm not sure!
Use @jjm34 his cwm! It was specifically made for the latest JellyBean update of the E Dual.
Mats
Sent from my C1505 using XDA Premium 4 mobile app
@wasturaka Probably won't, but you can try. Also, jjm34 had a JB dual recovery, didn't he?
@UltraGamerHD Ah... right. I was looking for the sources that @KDB223 was looking for; I already knew about this place.
However, I still like what I see; thanks for the CWM (might actually convince me to stock)!
@UltraGamerHD Ah... right. I was looking for the sources that @KDB223 was looking for; I already knew about this place.
However, I still like what I see; thanks for the CWM (might actually convince me to stock)!
- Status
Top Liked Posts
-
There are no posts matching your filters.
-
26Please Delete
THREAD MOVED: http://forum.xda-developers.com/xperia-j-e/development/zeus-kernel-stock-jb-xperia-e-t282231044This kernel supports USB charging at 1000mV which is what AC charges at
To turn on USB FAST CHARGE
Download Kernel Tuner or Trickster MOD from play store and enable USB fast charging
Or
Turn on:
echo 1 > /sys/kernel/fast_charge/force_fast_charge
Turn off:
echo 0 > /sys/kernel/fast_charge/force_fast_charge
Warning:
Anything more than 500 mA is unsafe, EXCEPT if the device is capable of detecting a Charging Downstream Port properly.
Attempting to pull more than 500 mA from a Standard Downstream Port (SDP) is fundamentally unsafe.
http://www.usb.org/developers/devclass_docs - see the Battery Charging section.
CDPs are very rare, and unfortunately, so are devices that can properly detect them.3Just for a report.
Heat
- 30°C on standby
- 32°C on light whatsapp and Facebook (using opera on 3G) , racks upto 35°C
..
- 37°C on a 30 mins unzipping process with charger plugged in.
-38°C to 40°C With WiFi and charger plugged in with full downloads for about 2 hours or so with phone in use.
-Phone hard-reboots after hitting 40°C+
..
250mhz~1.536ghz
Smartassv2
Noop.
Battery lasts fair enough.
Got 300 points more on Antutu Benchmark.
Sent straight from my Xperia E Dual3
Here is the toolchain: https://launchpad.net/gcc-linaro/4.6/4.6-2012.08/+download/gcc-linaro-4.6-2012.08.tar.bz2
tutorial: http://developer.sonymobile.com/2011/05/06/how-to-build-a-linux-kernel/
At the stage where it says type make then defconfig use msm7627a_defconfig.
You need to extract the toolchain and use ARCH=arm CROSS_COMPILE=PATH TO TOOLCHAIN /BIN FOLDER! make msm7627a_defconfig
Then ARCH=arm CROSS_COMPILE=PATH TO TOOLCHAIN /BIN FOLDER! make
Make sure your cd'd in kernel directory!
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone