Question Poco X3 pro Twrp boot loop

[alix264]

Hi,

sorry to take your time
I'm french so also sorry for my english

I have installed TWRP 3.51 on my poco x3 pro using ADB
fastboot flash recovery twrp.img

sending
writing
finish

fastboot boot twrp.img

After install phone boot in twrp.
I then use the option booting system and the phone boot again in TWRP

Then i used a boot.img from a rom stock
fastboot flash boot boot.img
I also tried fastboot flash vbmeta vbmeta.img
without success

Each time the phone boot in TWRP

regards
alain

Ps I'm not an expert to please explain as much as you can

 

[Haldi4803]

Dude what?

Fastboot Flash recovery recovery.img
That's it!
Hold Volume Up+ Power to boot the device to boot into Recovery.
Go to install and select customRomFileOfYourChoice.zip to install it.
Maybe needs a format Data to wipe failed encryption.
Reboot to system.
Done

 

[alix264]

Dude what?

Fastboot Flash recovery recovery.img
That's it!
Hold Volume Up+ Power to boot the device to boot into Recovery.
Go to install and select customRomFileOfYourChoice.zip to install it.
Maybe needs a format Data to wipe failed encryption.
Reboot to system.
Done

thank you
a stock rom or a custom rom ?

 

[Haldi4803]

custom ROM.
Stock rom has to be flashed differently.

 

[allianzcred]

Hi,

sorry to take your time
I'm french so also sorry for my english

I have installed TWRP 3.51 on my poco x3 pro using ADB
fastboot flash recovery twrp.img

sending
writing
finish

fastboot boot twrp.img

After install phone boot in twrp.
I then use the option booting system and the phone boot again in TWRP

Then i used a boot.img from a rom stock
fastboot flash boot boot.img
I also tried fastboot flash vbmeta vbmeta.img
without success

Each time the phone boot in TWRP

regards
alain

Ps I'm not an expert to please explain as much as you can

You need to install a custom ROM and format the data. If you are using an Android 12 or 13 ROM the data partition is encrypted that's why you're phone is boot looping

 

[alix264]

its working... I had to format data
thank you very much

 

[alix264]

All is working now. magisk installed (with trwp), lsposed install
But If i'm going in trwrp backup option, I don't see "system"

 

[alix264]

?

 

[AiTakako]

you have to mount the system partition first and set it via terminal to read/write i think.
But i am also not professional mhh..

Try mount it and when u cant Backup it ask again for help