The recovery image is included in that package.
I'm not helping any further, simply because I can't believe you expect me to have "new" firmware, which is no different than the "old" firmware, when I don't even own one.
Sorry, I did not see it before. I have tried with the ROM uploaded by Kuronosan, including at the recovery image. Still cannot manage to make it work correctly.
I confirm tha the rom that was packaged by the factory with my watch was newer and different. The main differences I can see are:
- the compilation date of my rom was November, the other is August
- the backup tool has its own icon in the launcher, while in my version there was no APP, and the backup was accessible from the system configuration menu
- there is an icon for the video recorder, in my ROM version there was only camera, with the option to record video or take pictures
- no icon to access to Downloads in my version
- the icon for some of the apps is different
- there was a kind of double side icon or widget to access to one of the apps that works in Chinese only.
With the one of Kuronosan, I have the following problems:
- the GPS is still never locking. It is something strange, I have the impression that the GPS starts working for few seconds and then it gets frozen. If it sees for example 9 satellites during this few seconds, then all GPS apps accessing the location services will see this 9 satellites. The time the GPS works is not enough to have a position lock.
- now the mobile does not work. It does see the mobile networks but does not get connected to any.
- WiFi works and I have not tried the BT.
- I have not managed to make Google Services and Google Play work.
A tip for those having problems with the boot, flash and so on. As you cannot remove the battery because of this Y screws, if the watch is blocked you need to wait for it to run out of batteries. This can take days (more than a week in some cases). The way to drain the battery to 0 is to keep the two pushed the two buttons for long time. I used some scotch around the watch and in few hours it will run out of battery completely.
When the batter is 0 and you connect it to you PC to flash the ROM, there is not enough power in to flash and charge the batteries. The flash process will stop. The best is to first leave it for 5 to 10 min connected to the USB port so the battery will have at least 2 or 3% of charge before you try to flash it. On the other hand, don't let it charge too much in case you need to discharge the battery again.
And pay attention to the magnetic connector. If you connect the USB side to your PC (or an adaptor) and then connect the watch, you make a short-circuit that could damage your USB port (even the main board of your PC). The best is to plug the watch first, and then the USB port.
Can somebody upload a newer ROM?
