[Poll] NEW Umeox x202(?) KK4.4, 320x320, IP68, MTK6572W, 1900mhz

[knosalaa]

Great, thanks a lot. From the specs callisto 300 folks claim their modem hardware includes both 1900 and 2100 but as you know us at&t only uses 1900 so if your 4.4 firmware could include 1900 band and working sensors that would top off the list and make many folks very happy!!
Thanks again and i will stay tuned in this thread

 

[kuronosan]

Only way sensors and modem can be fixed is if a 1900mhz device comes out or a custom kernel is built for those sensors, or if a similar device with similar sensors is released.

 

[acidbr]

Thanks for the ROM. Sorry I did not come back to you before.

I have been trying to make it work and it has taken me quite some time. I have gone through the process of flashing my watch, including to brick it few times, recover it, etc....

At the end I have managed to flash it. The very first thing I have noticed is that my ROM was from Nov 2014 and yours is from August 2014.
There are some differences in the layout of the icons of the pre-installed apps, and some of them are different.

With your ROM I have problems to install Google Play Services and Google Play Store and make it work. The service stops after a few seconds with an error message. I have also tried to make the GPS work withouth success, so my problem is not yet solved by reflashing my watch with your factory ROM.

I have the impression that there is still some persistent configuration in the memory from the old flash that had problems. With your ROM I cannot whipe out completely the memory and make a factory reset. When the watch boots with the POWER and HOME pressed, I get to the menu with two options but when I press POWER it does not go to recovery mode, it reboots and starts normally.

I have the impresion that my initial problem is probably in that part of the memory that is not flashed with your firmware.

Is is possible to pass me the USRDATA, CACHE and RECOVERY binaries?


Has somebody a newer ROM image?

I have the 1.1 rom November 2014 watch iron man . I would like to help, but to publish the xda link requires me to publish at least 10 posts . Sorry for my English .

 

[gerhardo]

I have the 1.1 rom November 2014 watch iron man . I would like to help, but to publish the xda link requires me to publish at least 10 posts . Sorry for my English .

Would be great with an update.
You can always put spaces or newlines in the url, so not the xda filter triggers.
The xda filter is to avoid spam and promotion.

 

[acidbr]

https:// mega.co. nz/#!ihoXhLaR!3CZ6iZk3w5t7eqKYp3CJylhJBhBcRBWdGGEoWjSn1s0

Enjoy

 

[gerhardo]

Enjoy

Thanks
I tried it, it works.
Some notes:
* No problem installing, Firmware upgrade. I tried restoring my existing KK /data, but had to wipe it (popup in Chinese at startup).
* Default language is Chinese. Change i Settings, Personal (the heart), third option
* The device rebooted after about 30s, a message in Chinese and a countdown from 20 until rebooting. Changing to English fixed this after some tries.

Noticed differences to @kuronosan tweaked ROM (most mentioned in the announcement, he changed them I suppose):
* System info: Same baseband, kernelversion. Build number bumped from 1.0(1.1) to 1.1(2.2) 20141016.
* SuperSU by default
* Boot logo
* Default language is Chinese, some apps like App Permission stay in Chinese
* Limited settings, in the same way as in default ROMs
* Limited accessibility menu
* Some Chinese apps, like unova+.
* No Play by default
* Limited font sizes, Large&Small
* Changed partitioning, larger system partition

No noticed improvements in the ROM.
Is 1.1 2014-10-16 the latest version?
Thanks to @acidbr for providing this

 

[Shonky*]

So sensors still not working? That would be the big one for me.

 

[gerhardo]

So sensors still not working? That would be the big one for me.

No, the ROM is for the x202, so no changes.

There was an update to the unova+ app with English.
It crashes when trying Remote Camera though.

 

[knosalaa]

What files needs to be flashed to change EU 2100mhz to 1900mhz modem. I'm currently on Kurosan's KK and can't use 3g in US. I do have stock omate firmware 4.2 which was for NA
Any help would be greatly appreciated

 

[gerhardo]

What files needs to be flashed to change EU 2100mhz to 1900mhz modem. I'm currently on Kurosan's KK and can't use 3g in US. I do have stock omate firmware 4.2 which was for NA
Any help would be greatly appreciated

There is no known 1900MHz baseband for KK (in this forum at least), the x202 is only released for 2100MHz.

 

[kuronosan]

You CAN'T, if you've been following any of my threads you would have seen that JB stuff isn't compatible with KK stuff on MTK devices. The kernel drivers are linked between versions, so a baseband on JB will not work on KK firmware. You need a KK baseband.

 

[bimbilo560]

new umeox

For me this watch would be ok. I have three Simvalley smartwatches and I am happy with it. If the Umeox has the same quality I would buy it.
There is only one important thing, the support, if I would have a problem !
One week ago I asked for an european software for my Unova Ironman (Umeox product) which unfortunately, has an cinese software, but Umeox did not reply. For me the support is important.
Can I see some fotos?

 

[dev_null]

Did this thing ever get released

Sent from my GT-P5110 using XDA Free mobile app

 

[gerhardo]

Did this thing ever get released

UNova IronMan 2100 released already before this thread.
There is no 1900 version that I have seen though. This also seem to give problems for units upgraded from 4.2 to 4.4. For some it worked, other not.

 

[simple1i]

Unova Ironman Generation 3?

Unova Ironman Generation 3 is being advertised. What makes this 3rd generation is the title.

http://www.made-in-china.com/showro...ation-3-320-320-Screen-Resolution-1G-8G-.html

Nothing but treachery from most of these Chinese sellers.

 

[kuronosan]

It's upscaling.

 

[ramihollings]

Just bought this from Amazon. Had it a week and it is far superior to the Omate Truesmart.

 

[David42290]

Just bought this from Amazon. Had it a week and it is far superior to the Omate Truesmart.

It is a good watch... About sensors, all is ok?

 

[ramihollings]

All sensors are working. Screen is 320*320. Haven't been able to root yet but so far everything is working well.

 

[CPGOD]

All sensors are working. Screen is 320*320. Haven't been able to root yet but so far everything is working well.

try kingoroot - it may take ages but worked on my IM and clone