Port of the Nova3e official rom to ANE-LX1

Search This thread

qouet

Senior Member
Feb 7, 2010
56
18
Low level format and notch isn't recognized, gapps what to do, adb installing not working, says some files are missing, it is useless. Some advice

Hi, I don't understand for the notch ....
For gapps : download modified Zip on the first post and flash this with TWRP.
It's work on my device.


what version of the firmware did you put ?
 

qouet

Senior Member
Feb 7, 2010
56
18
I'm testing android 9 firmware from nova 3e. No notch, some features not working in setttings like battery, notyfications. Still testing

installed the rom but there are many many issues. the notch is not recognized,half of the settings doesnt work.

Hi guys, I put a link on the main page of the thread with a patch for trouble in the settings.
Unfortunately I do not know about the Notch
 

dcduartee

Senior Member
Aug 23, 2015
782
271
Does your phone say android when booting? I installed using your method but when booting it show android boot animation not huawei
 

qouet

Senior Member
Feb 7, 2010
56
18
Does your phone say android when booting? I installed using your method but when booting it show android boot animation not huawei

Hi, on first boot my phone say Android ... Please try this :
Extract Kernel and Recovery .img of the UPDATE.APP
Flash 2 .img file and reboot
After reflash TWRP
 

dcduartee

Senior Member
Aug 23, 2015
782
271
Hi, on first boot my phone say Android ... Please try this :
Extract Kernel and Recovery .img of the UPDATE.APP
Flash 2 .img file and reboot
After reflash TWRP
I'll try that later. Can you possibly send me the twrp you use? The ones I tried restart after a few seconds
 

qouet

Senior Member
Feb 7, 2010
56
18

Attachments

  • Screenshot_20190220_170338_com.android.settings.jpg
    Screenshot_20190220_170338_com.android.settings.jpg
    229.5 KB · Views: 166

dcduartee

Senior Member
Aug 23, 2015
782
271
You try to reset via original recovery ( From settings or via adb reboot recovery) ?
I installed the rom, update failed at about 60%, rebooted into stock recovery, factory reset and after the first boot I flashed the kernel. I also tried installing twrp but the phone shuts down after a few seconds of getting to twrp. Did I do something wrong?
 

qouet

Senior Member
Feb 7, 2010
56
18
I installed the rom, update failed at about 60%, rebooted into stock recovery, factory reset and after the first boot I flashed the kernel. I also tried installing twrp but the phone shuts down after a few seconds of getting to twrp. Did I do something wrong?

after failed update i have reflash system and kernel. Reboot, wait for Home and reboot in recovery.
Flash gaaps pico and reboot.
For twrp i use thé version of Pretorian .
Because the version in HOWTA crash.
 

dcduartee

Senior Member
Aug 23, 2015
782
271
after failed update i have reflash system and kernel. Reboot, wait for Home and reboot in recovery.
Flash gaaps pico and reboot.
For twrp i use thé version of Pretorian .
Because the version in HOWTA crash.
Can you get me a link for the twrp? Can't find it anywhere
 

qouet

Senior Member
Feb 7, 2010
56
18
I managed to install the gapps and the setting fix but unfortunately it still says device is unknown and says android at boot

You have reflash system with fastboot ?

Try this order :
Reflash Recovery Ramdisk from update.app with fastboot
Reflash Kernel from update.app
Reflash System from update.app
type : fastboot -w
Reboot to recovery or e-recovery and perform an hard reset
restart the phone without flash TWRP.
You seen Huawei on startup ?
 
Last edited:

qouet

Senior Member
Feb 7, 2010
56
18

ry this order :
Reflash Recovery Ramdisk from update.app with fastboot
Reflash Kernel from update.app
Reflash System from update.app
type : fastboot -w
Reboot to recovery or e-recovery and perform an hard reset
restart the phone without flash TWRP.
You seen Huawei on startup ?
 

dcduartee

Senior Member
Aug 23, 2015
782
271
ry this order :
Reflash Recovery Ramdisk from update.app with fastboot
Reflash Kernel from update.app
Reflash System from update.app
type : fastboot -w
Reboot to recovery or e-recovery and perform an hard reset
restart the phone without flash TWRP.
You seen Huawei on startup ?
Yeah I did that. No luck
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Update of April 17
    Hello everyone,
    The Beta version for the ANE-LX1 C432 has been available since the 15th.
    If you had already installed another beta version, here is the procedure to follow everything in place:
    We will use the utility Beta-Downy0.4 (very slightly adapted to P20 (TWRP)) Thanks to @Androlark and @side_flip15.
    Link : Beta Downy
    1) Download the latest rom on fimware finder
    2) Decompress the files and rename the file update_xxx_hw_xx.zip in update_all_hw.zip
    3) Copy zip files into ZIPS-HERE
    4) Launch Flash.bat
    5) Follow the instructions ?
    Troubleshoot:
    If the update does not go to the end, do not panic reboot the phone in recovery (TWRP to disappear) and push on low level formatting.
    Restart Flash.bat.

    ATTENTION ALL YOUR DATA WILL BE DELETED MADE BACKUP

    Update of February 12

    I managed to adjust the crashes in the settings. And at the same time the opening of the phone manager.
    here are the links to the patch to flash with TWRP.

    Warning only do it on a firmware EMUI9
    Patch HwSystemManager

    If someone tells me how to make my functional rom flashable without you risking a brik. I'm listening.
    I'have too an update.APP with the HISIUFS_GPT.img




    Hello,
    I started wearing the Nova3e 9.0.1.100LOG build.
    But I have a problem with the Vendor flash
    With HWOTA crashing to 50%.
    On the other hand in low level format (Emui Recovery).
    Everything seems to work, but I think that since I can not flash vendor, I do not have Gapps ahpps.
    I try changing the install.sh openGapps but even the system partition is too big ...
    If anyone has an idea ... I'm a taker.
    I specify that I am new to this kind of hack ...

    Edit 06.02

    I managed to flash the PICO Gapps by editing the install.sh file.
    the modified zip download : Modified Gapps


    How did I do:

    1) Check that your bootloader and FRP are unlocked
    2) Install Firmware Finder on your device

    3) Download the firmware for the ANE-AL00C01 (9.0.100).

    4) follow the HWOTA method of @vovan1982 attention only change the firmware not brand. it only takes two files (no data_public). at home that's what it has messed up at startup 50% of maj ...

    5) I extracted the update.app with huawei extractor.

    6) I flash the Kernel, the system and the recovery. via fastboot.

    I had a Huawei recovery message telling me that we had to do a low level reset. then it goes to work.

    it is not a certain procedure. and you have to know that at update I was not in stock rom.

    If you reproduce it's at your own risk
    2
    @qouet Do you have access to 3G/4G network? Cause I don't... It's literally the only thing that's not working for me.

    Cheers,

    AS

    Have you checked the APN settings? I had to add a new setting from my network there. Even on stock Oreo
    1
    If my understanding is correct you ported the EMUI 9 from Nova 3e to the P20 Lite? If so then can you please provide download links? As it will be helpful for us. Maybe it will boot on other hi6250 device. Thanks.

    There nothing ported..
    Used files from firmware finder... Better don't Doo that :)
    1
    The gestures look smooth! Much smoother than on EMUI 8. Can't wait to get EMUI 9. Hoping the beta will launch soon in Europe.
    1
    I'm testing android 9 firmware from nova 3e. No notch, some features not working in setttings like battery, notyfications. Still testing