[PORTING][ALPHA] Sailfish os 2.0

[gigitux]

Did not boot for me. Full wipe flashed snapshot then sailfish, stuck on boot/splash screen. Xt1548.. Maybe bad DL I'll try again.

Wait 5 minutes bro.

Guys i have a big problem with ril. i have this error:
[ 3016.049151] pil-q6v5-mss 4080000.qcom,mss: modem: Failed to locate modem.mdt

The problem are that our modem file are archive, but sailfishos accpet only file!

Anyone can help me?

 

[JackSparrow17]

Will android apps work with this Os?

Sent from my MotoG3 using XDA-Developers mobile app

 

[Gravemind2015]

Wait 5 minutes bro.

Guys i have a big problem with ril. i have this error:
[ 3016.049151] pil-q6v5-mss 4080000.qcom,mss: modem: Failed to locate modem.mdt

The problem are that our modem file are archive, but sailfishos accpet only file!

Anyone can help me?

I found a github page for osprey that contains a similar file venus.mdt here-
https://github.com/MotoG3/proprietary_vendor_motorola/tree/cm-12.1/osprey/proprietary/etc/firmware

Also,i am running cm13 official and in /firmware/image,i found the file attached below. Extracting it;inside has a file named modem.mdt !


Hope this is the required file. I have attached the file.:good::good:


Please say if this is the required one!:laugh:

 

[gigitux]

I found a github page for osprey that contains a similar file venus.mdt here-
https://github.com/MotoG3/proprietary_vendor_motorola/tree/cm-12.1/osprey/proprietary/etc/firmware

Also,i am running cm13 official and in /firmware/image,i found the file attached below. Extracting it;inside has a file named modem.mdt !


Hope this is the required file. I have attached the file.:good::good:


Please say if this is the required one!:laugh:

Thanks for your help.
I would extract all *gz and put in /firmware/image.
The problem is partition is small and motorola use .gz
Android is patch for this, but not sailfish os...

 

[MultiPDev]

Edit: Works like a charm!!

 

[gigitux]

Hi, it doesn't work for me. It displays the bootloader unlocked warning screen and then the display turns off.

Try change filesystem of /data in ext4

 

[MultiPDev]

Try change filesystem of /data in ext4

I reflashed everything and now I'm on Sailfish OS Maybe I forgot to flash cm12.

---------- Post added at 19:44 ---------- Previous post was at 19:39 ----------

Nice work!! Please upload the build with the wifi fix, as it would make the device more usable Thanks a lot!!

 

[gigitux]

I reflashed everything and now I'm on Sailfish OS Maybe I forgot to flash cm12.

---------- Post added at 19:44 ---------- Previous post was at 19:39 ----------

Nice work!! Please upload the build with the wifi fix, as it would make the device more usable Thanks a lot!!

For now:
1. Open terminal
2. sudo passwd
3. Insert password
4. su
5. Insert password
6. modprobe wlan

Enjoy!

 

[MultiPDev]

For now:
1. Open terminal
2. sudo passwd
3. Insert password
4. su
5. Insert password
6. modprobe wlan

Enjoy!

It says sudo: command not found
EDIT: Never mind, I solved it using devel-su. Wifi works, I'm gonna play with it for a while... install some apps, do some web browsing... and see if I can use WhatsApp.
EDIT 2: It connects to wifi but the internet doesn't work.

 

[HelpMeruth]

how did they fix ril on the nexus devices?

 

[gigitux]

how did they fix ril on the nexus devices?

Why nexus have got a modem.mdt.gz file?

It says sudo: command not found
EDIT: Never mind, I solved it using devel-su. Wifi works, I'm gonna play with it for a while... install some apps, do some web browsing... and see if I can use WhatsApp.
EDIT 2: It connects to wifi but the internet doesn't work.

Sorry, I forget a little step. We add nemo to inet group with:
usermod -aG inet nemo

 

[Stefano 99]

Why nexus have got a modem.mdt.gz file?



Sorry, I forget a little step. We add nemo to inet group with:
usermod -aG inet nemo

I'm not a developer, so, this could be a stupid idea.
Is it possible to decompress modem and put it in another partition (system, for example) but with a connection in modem partition?

Stefa99



Inviato dal mio Moto G 2015 (Stock 6.0.1)

 

[Gravemind2015]

I'm not a developer, so, this could be a stupid idea.
Is it possible to decompress modem and put it in another partition (system, for example) but with a connection in modem partition?

Stefa99



Inviato dal mio Moto G 2015 (Stock 6.0.1)

I was wondering exactly the same thing.Taking windows loaders and xposed thingies in mind; it may be possible to inject the modem files to the setup or fool it to think they are in required location.But I admit I have never seen anything like that before.

Broadcasted from Zeta Reticuli

 

[MultiPDev]

Why nexus have got a modem.mdt.gz file?



Sorry, I forget a little step. We add nemo to inet group with:
usermod -aG inet nemo

Still no internet.

 

[gigitux]

Still no internet.

Reboot and run again modprobe wlan with user root

I was wondering exactly the same thing.Taking windows loaders and xposed thingies in mind; it may be possible to inject the modem files to the setup or fool it to think they are in required location.But I admit I have never seen anything like that before.

Broadcasted from Zeta Reticuli

Guys i have already tried with syslink, but i have not success.

Try yourself, extract all file that are in /firmware/image, in another directory.

Do a syslink in /firmware/image (first mount partition with mount -o remount,rw /firmware).

The only result was a device reboot.

P.S: For connect to device telnet 192.168.2.15 2323

 

[MultiPDev]

Reboot and run again modprobe wlan with user root

Thanks, now the internet works.

---------- Post added at 17:59 ---------- Previous post was at 17:22 ----------

As far as I know the ported version of Sailfish doesn't support android apps, am I right?

 

[skooter32]

Hav u got mobile data going yet or just wifi?

 

[gigitux]

Hav u got mobile data going yet or just wifi?

I'm working on RIL..

Guys, can you help me debug device?

With smartphone connect on pc between usb and with sailfishos run

telnet 192.168.2.15 2323

Now, run and copy on pastebin the output of:

dmesg

After run

mkdir /test
cd /firmware/image
ls (copy on pastebin the output)
cp /firmware/image mba.mbn.gz /test
cd /test
gunzip mba.mbn.gz
mount -o remoun,rw /firmware
cp mba.mbn /firmware/image
cd /firmware/image
ls (copy on pastebin)
dmesg (copy on pastebin)

Thanks

 

[RussianTaco]

Thanks for your hard work bro!

 

[argo II]

Becouse the project is based on cm 12.1

can the same be ported to cm 13/marshmallow