1/ Call your Phone Carrier or look around on the internet and ask for the "SMSC Number".
If you're on AT&T or US T-Mobile, here are the codes
AT&T: +13123149810 (Actual Number) = 0713121139418f0 (PDU format - You need this)
T-Mobile: +12063130004 (Actual Number) = 07912160130300f4 (PDU format - You need this)
2/ Follow the Instruction from here
http://wiki.cyanogenmod.com/wiki/SMSC_Updates
Hope this helps
UPDATE
If you get UPDATE ERROR, under *#*#4636#*#*, you can try this (has been confirmed to work with AT&T)
+ Install GOSMS from Market
+ Go to Settings -> Advanced -> Send Settings -> Enable customized SMSC -> Enter SMSC number obtained from Phone Carrier (REAL NUMBER NOT the PDU
If you're on AT&T or US T-Mobile, here are the codes
AT&T: +13123149810 (Actual Number) = 0713121139418f0 (PDU format - You need this)
T-Mobile: +12063130004 (Actual Number) = 07912160130300f4 (PDU format - You need this)
2/ Follow the Instruction from here
http://wiki.cyanogenmod.com/wiki/SMSC_Updates
SMSC number (+.......) to PDU format Conversion Web if you can't access from the above link http://www.twit88.com/home/utility/s...-encode-decodeNotice the numbers include the +, this matters for the next steps
Converting to PDU format
1.Take your number, including the + and go to http://www.twit88.com/home/utility/sms-pdu-encode-decode
2.Towards the bottom of the page, there is a spot to enter SMSC, Receiver and Message 1.Enter your full SMSC number (including the +)
2.Leave Receiver and message box blank
3.Select Alphabet 7
4.Hit Convert
3.You will get an output in the box on the right side
4.Take the first 16 digits from the second line (examples for above carriers listed)
Sprint: +17044100000 = 07917140140000F0
Verizon: +316540951000 = 0791135604590100
AT&T: +13123149810 = 0713121139418f0
T-Mobile: +12063130004 = 07912160130300f4
Your SMSC number is now in PDU format, now to update your phone:
1.Open Dialer
2.Type the following sequence '*#*#4636#*#*'
3.Open Phone Information
4.Scroll down to SMSC 1.Optional: Hit Refresh to see current SMSC number used
5.Enter in your PDU formatted SMSC number
6.Press Update
Hope this helps
UPDATE
If you get UPDATE ERROR, under *#*#4636#*#*, you can try this (has been confirmed to work with AT&T)
+ Install GOSMS from Market
+ Go to Settings -> Advanced -> Send Settings -> Enable customized SMSC -> Enter SMSC number obtained from Phone Carrier (REAL NUMBER NOT the PDU
Last edited: