• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

project SLIMBOX

Search This thread

Milde60

Member
May 29, 2021
27
3
Ahoj pls help , chci vědět jak aktualizovat na nejnovější verzi slimbox rom bez ztráty dat v interním úložišti ? , používám s905x3 x96maxplus

Ahoj pls help , chci vědět jak aktualizovat na nejnovější verzi slimbox rom bez ztráty dat v interním úložišti ? , používám s905x3 x96maxplus q2
Upgrade firmwaru při ukládání dat v nástroji USB Burning Tool. SlimHouse Zrušením zaškrtnutí vymažete flash před blikáním
Hi pls help , i want to know how to update to latest version of slimbox rom without losing data in internal storage ? , i am using s905x3 x96maxplus q2
When updating the firmware with a USB cable, you must not select the ERASE FLASH check box if you want to keep the settings
 

Milde60

Member
May 29, 2021
27
3
When updating the firmware with a USB cable, you must not select the ERASE FLASH check box if you want to keep the settings
 

dimst1

Member
Oct 4, 2021
9
2
hi
i noticed that you posted a mode for tx3 mini with 9012 wifi chip that i request you.
i havent test it yet but i ve donated a beer 🍺for you and i have to thank you for your time and your effort.
i ll test it and i ll provide feedback if it works properly.
Thank you again
 
  • Like
Reactions: eauyong

dimst1

Member
Oct 4, 2021
9
2
hi
i noticed that you posted a mode for tx3 mini with 9012 wifi chip that i request you.
i havent test it yet but i ve donated a beer 🍺for you and i have to thank you for your time and your effort.
i ll test it and i ll provide feedback if it works properly.
Thank you again
hi again
i ve test it and wifi is not working at all. Back to stock but thank for your effort anyway. nice rom
 

HouceinM

New member
Jul 6, 2021
2
0
Hi all
I try this rom in one week on my kiii pro s912 3g/16
I t s stable but i have a problem with power off,, no shutdown,,but restart the device,,,i try to change the config but same problem
 

stylesheet

Member
Oct 20, 2021
16
1
Ireland
Xiaomi Poco X3 Pro
The ATV version works perfectly on my old X96 Mini but there is one issue... the onscreen keyboard doesn't seem to work with the remote control so I have to use a USB keyboard. Sorry if this has been posted before. Any help appreciated!
 

ElmTunes

Member
Nov 6, 2012
18
2
Hi, I have the same problem with my HK1 box. I used the Amazon prime app directly from Playstore. App so far runs, but if I want to start any movie I get this HDMI error...

How can I solve that?
Do I need anther APK?

And I have another question... Would it be possible that Amazon prime stuff will be also displayed in main menu stream, like for other apps?
Hi, I have to ask again? Because the problem with Amazon prime app is still there.
In older Posts I read something about "disable hdcp under developer options" but with latest slim version, there is no such option existing.

Could you please help me how I could solve the problem?

Thanks Elm...
 

cali.s

Senior Member
Nov 3, 2009
132
29
after updateing TWRP_AML_SlimHouse_3.5.2.zip from Recovery and 2. Reboot the Box in the Recovery, TWRP was gone.
is this a Temporary solution?
 

twedie

Senior Member
Feb 10, 2010
88
0
Nantes
after updateing TWRP_AML_SlimHouse_3.5.2.zip from Recovery and 2. Reboot the Box in the Recovery, TWRP was gone.
is this a Temporary solution?
What is the box TV?

Attention TWRP_AML_SlimHouse_3.5.2.zip
On TV boxes with a 912 processor, the correct recovery of the Vendor partition could not be defeated . Therefore, we also backup the Vendor Image section , which must additionally be restored separately !!!
 

losts80

Member
Jun 24, 2020
12
1

hi all

a simple question in the version Slimbox v12.2

How can I enable or disable TCP/IPv6 ? I want the steps correctly

 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Why are you spamming the whole thread with multiple messages? You can still edit your first one :)
    That said, I think it is very easy to buy a male-to-male USB cable in a shop or online, unless you live in a very remote area.
    2
    That's not a firmware problem dude, you need to go to the network connection issues department...
    2
    Well, 13 is unlucky number, so no slimbox v13 :p

    14 is out but on beta i'm afraid. You should wait, go 12.2.
    I took my x96Max Plus2 from 10.4 to 14 and so far all is well.

    Just had to change a few settings that were hard to find. My keyboard had Russian charters, tried everything to find the bad setting, than finally found the correct setting in the notifications list about keyboard setup.

    I had an issue with app drawer putting all the icons up and down the right side of the screen when I returned to the home screen. So I disabled app drawer. But that was after I had installed app starter. As that's the one I like. So it was minor issue but I never had this issue before.

    It fixed my G30s voice remote mic to work, not only with Google assistance but in each app that supports it. That's what I really wanted.

    It fixed my issue with playing ac3 5.1 on my old tv with only two speakers. The box finally down mixes to stereo.

    The only problem I have is this box always had low audio output volume, I always had viper4androidFX installed so I guess a will still need that. I see Dolby is an option also but not sure if that can increase audio gain like viper.
    If anyone knows please let me know before I try install and then remove it to find out.

    Thank SlimHouse for this great firmware.
    1
    Hi @SlimHouse, please could you tell me which firmware will suit on my Beelink GT1?
    Here is the device specs:
    CPU Amlogic S912
    2GB DDR3 RAM
    16 GB ROM
    QC9377 Wi-Fi chip
    1Giga LAN
    Board G912

    Do Tronsmart Vega S96 or Mecool BB2 will work?
    Thank you!


    ----edit-----

    I flashed Pie firmware for Ugoo AM3 as suggested in post #858 and everything is good apart a weird error message spamming in matlog:

    MesonHwc
    Too many layers need CURSOR_PLANE, skip.

    I had some problem in using the mouse to enable options on some apps, while using the remote control everything is fine.
    Any hint?
    1
    With Ugoos AM3 FW you have not get any issue?
    No.
    Try these steps:
    -install flashtool and drivers while the tvbox is switched on and connected to the PC.
    -once installed drivers, start flashtool and switch TV box off and remove it from PC.
    -load firmware on flashtool and click on start.
    -put TV box in recovery mode pushing the hidden switch while inserting the USB in your PC.
    -flash process will start and much likely it will stop at 1%. Insert power supply plug in the TV box and the flash process will start again by itself.

    If you get some error, try using another USB port either on the PC or the box.
  • 63
    RY51YwF.png


    project SLIMBOX


    Multimedia firmware for TV boxes with Amlogic S912, S922X, S905X2, S905X3, S905X, S905W, S905Y2 processors

    SLIMBOX ATV and AOSP are two custom firmwares suitable with some modifications for many android TV boxes.
    The main ATV firmware is installed via UBT.

    Version 14

    • Installing patches from settings
    • Fixes for problems with sound
    • Fixed a soundbar bug when activating services in special features (ATV)
    • Added USB settings, animation speed
    • Advanced Bluetooth settings
    • Added support for Vulkan (s905x2, s905x3)
    • Added the code for the AFR_CALC button to the Key remapping application
    • Configuring AFR_CALC in Application Key remapping
    • Updating built-in applications
    • System amendments



    Cumulative patch for SLIMBOX


    New changes:

    Contains:



    Supported TV boxes

    8
    SLIMBOX ver 8

    • Updated google services and apk
    ВЂ Returned the choice in the settings of a dark or white theme
    • Returned additional image settings
    • Updated firmware
    • In AOSP, I returned the recent stocks and closed the menu button
    • Added debug settings
    • Added additional power settings
    • Various system corrections
    5
    I have found out how to root SlimRom with Magisk:

    1. Root SlimRom via the settings
    Then you will have "Superuser" rooting.

    2. Install TWRP
    You don't need to, but you can install your TWRP image permanently via the TWRP app:

    3. Extract boot.img
    You need to extract "boot.img" in TWRP:
    Code:
    cat /dev/block/boot > /sdcard/boot.img

    4. Patch the stock boot.img with Magisk manager app
    Install Magisk manager apk.
    Press the upper install button and select the stock boot.img.
    Magisk will create a patched boot.img.

    5. Now unroot in SlimBox settings

    6. Flash the patched boot.img in TWRP by selecting install, then image, then choose the file, to "boot"

    7. Finally flash Magisk.zip in TWRP


    Thats it.
    4
    3. Extract boot.img from stock firmware
    You need to have a stock rom for your device.
    Ideally a zipped rom, so that you can extract the "boot.img" out of it.

    In case you have an img-file, than you need to extract "boot.img" out of it via Amlogic toolkit:

    By this you can extract the stock boot.img from the stock firmware.

    This is only good for android 7 images, Android 9 (which most people are using) is totally different.
    To root slimbox you only need patch the current boot.img
    In twrp :
    cat /dev/block/boot > /sdcard/boot.img

    Then use magisk to patch the img

    Reboot to twrp

    Flash the patched boot.img to boot.

    Reboot
    3
    I tried out all the Netflix APKs found in this link http://freeaddons.free.fr/public/AML/X96AIR/Apps Apk/Netflix/

    They are all the mobile version of Netflix. I have found a working Android TV version of Netflix if the person who manages that link wants to upload it.