v4.9
-- Intelli-Thermal (Better thermal man.) re-activated for users..
-- Kernel compiled with latest and updated UBER-Linaro-4.9
-- Rom compiled with latest and updated UBER-TC
-- Notification interact of Ambient display fixed
-- Removed unused izat config
-- Support Samsung extended AGps
-- Clean out init
-- Native time service enabled
-- Blur UI removed
-- Improved generic extract scripts
-- Fixed media server denial
-- And this build is the last build until next Android security patch... I'm already on N build..
v4.8
-- Kernel updated to v1.2.4
-- Revert "overlay Doze"
-- Thermal engine updated with new values and Gpu monitor
-- Init update
-- Fix mediaserver denial
-- Clean-up cmhw related items
-- Gps: Ported from AOSPA bacon kang and adapted to our device
-- Gps: Update Gps config.
-- Wifi and Mobile buffer sizes re-fixed
-- Ril fixes
-- Proximity sensor issue (possible) fixed for some users
-- New Doze set up
-- Build fingerprint revised for all device variants
-- Contact sync issue fixed with latest Gapps
-- Switched to thermal monitoring
-- Keep sim state on low power mode
-- Gps header re-updated
v4.6
>>> Fixed some Selinux denials
>>> Boot sync disabled
>>> Throttle CPU earlier
>>> Blur enabled (in Test phase)
>>> C2D deafult compositor
>>> Device perms header removed
>>> Clean & Fix up init
>>> Clang build disabled .. No any perf. imp.
>>> Rework audio
>>> And a few things....
v4.5
Changelog post :
2065
v4.4
Go to
this post
v4.3
Purify Kernel updated to v4.4Rev. (F2fs, problematic commits, etc.. fixed and tested)
All device sources revised and updated ( Rootdir, device prop. , etc.. )
Gps.conf updated to latest M source
Audio device source changes
DisplayColor mode and Vibrator settings fixed depending to CM changes
Busybox added
Some CM source commits revised to our device comp. (Sepolicy, sqlite, wpa supp. , bionic, toybox)
And I'm sure There are more of but at the moment, I'm very tired...
v4.2
Patch to allow SuperSU to run in SELinux enforcing (Thanks to BeansTown106)
Add policy to SELinux to allow ViPER4Android in enforcing mode ( Thanks to maximumentropy )
Init clean up, updates (Thx to temasek)
Use cmsdk fileutils
New core values adapted to Purify Kernel
Purify Kernel updated to v4.2.1
And more but too late for now..
v4.1
SDcard name issues fixed,
cpu/gpu governors permissions fixed,
okhttp upgraded and build issues fixed,
advancedDisplay and displaymode control changes fixed or reverted,
sepolicy permissions revised and applied little changes
There are a few changes and adding (my own codes to fix some issues or dev.) but My notes not with me now.. Then I'll add them
v3.9
for changelog go to
post
v3.7
-- FLAC support added.. Tested with 16 and 24 bit (48 kHz and 88.2 kHz) FLAC file.. It was a special req. by
@linx1287..
-- Tcp per. updated from CAF
-- Thermal-engine, device performance and hardware conf. re-fixed or revised... And updated to mm source.. (partially for now)
-- And ... really don't remember now but must be nice things
v3.6
- Performance tweaked Purify Kernel v4.0 -Tweaked Version - ( For opt. performance, please give a few min. to it and later reboot the phone)
-Update to 6.0.1_r46
- Minor tweak for ramdisk
v3.5
- Kernel updated to v3.8.. Linaro 4.9 toolchain used.. Includes exp. fixes so if you don't like, please report me..
- to speed-up first boot sequence, enabled dex-preoptimization
- Wlan configuration updated.. Based on latest M stock..
- Enabled larger TCP accept..
- GPS configuration updated with GPS blobs from M
- Added Audio hal period override and to optimize the playback latency..
- Added media performance codecs from M sources.
- Cleaned useless audio settings to possible audio distortion during call and using speaker..
- Gsm prop. re-setted to better network switches
- Partially tweaked interactive scaling..
- Device permissions fixed..
- and maybe a few or more changes/fixes
v3.4
>> Added Gello ( Say Hello to Gello - New Browser by CM team )
>> Device boot opt.
>> Enhanced Zram&Zswap support
>> Device codes fixed for comp. to new CM source
>> Audio (CAF based) fixes
>> And forgotten ones (This is very possible after last week
) )
v3.3
>> Kernel updated to v3.7
>> Sqlite upgraded to 3.13.0
>> Latest CM updates
v3.2.1
>> Restored hlte folder from my backup.. Twrp device tree issue must be fixed for other hlte variants (like T-Mo, Can)
>>>> Update not needed for other variants (like hlte and other variants)
>> So missing custom unofficial build tag (
[email protected]) issue fixed
>> Merged latest CM updates (not so important for update from v3.2 to v3.2.1)
v3.2
>> Purify kernel updated to v3.6
>>>>> All Purify Kernel specific features stay same than previous version
>>>>> IntelliPlug, IntelliActive and PowerSuspend added
>>>>> F2fs updated with latest fixes..
>>>>> And some needed fixes
>>>>> Uber TC (Optimized) 4.9 toolchain used
>> Compiled with Uber TC 4.9
>> Latest CM updates
v3.1
>> Android 6.0.1_r43 (MOB30J)
>> Purify Kernel updated to v3.5
>> Backport Zram&Zsmalloc from Google Kernel
>> Backport Zcache from QC -Qualcomm- 3.18 kernel
>> Various fixes (Related to Swap, Swapcache)
>> Various CodeAurora fixes
>> Added LZ4 decomp. module
>> LMK redesigned
>> and Cpufreq commits reverted
>> Zram&Zcache enabled to Purify Rom (Fully supported and comp. with Purify Kernel v3.5)
>> Zram size set to 25%
and forget it
v3.0
>> Kernel updated to v3.4
>> Cpufreq, Alsa: Timer and Usb audio fixes applied
>> Forced Usb fast charging support -Yank555.lu-
>> Various opt. (Battery and Perf.)
>> Gps settings updated and fixed ( Now more accurate and speedy lock )
>> Bionic fixes ( For speed and smooth )
v2.9
>> Kernel updated to v3.3 (Linux Kernel 3.4.112, Bluetooth drivers updated, optimizations and various fixes)
>> Latest CM updates
>> and no time for more
v2.8
>> Kernel updated to v3.1
--Frontswap (to cache swap pages) enabled again
--Zswap (and related sub-branches) enabled.
--LZO added
--F2fs updated to latest f2fs-stable
--Applied msm: Protect buffer overflow due to malicious user fix (CodeAurora)
>>Re-worked on Audio (Sound volume levels, voip, headset etc..)
>>Various aosp fixes added
>>Call recording feature activated again
>>A few code imp. to Bluetooth for testing.. (Still good works generally)
>>Various boot improvements
>>Latest CM updates
v2.7
>> Re-worked on bluetooth
>> Code cleanup on root dir and sepolicy
>> Sqlite upgraded
>> Kernel updated to v2.8. (I'm hopeful that more battery friendly and responsive)
>> Cm Updater removed again and again
>> Latest CM updates
v2.6
--ExtSdCard is not writable issue for Titanium Backup fixed
--Bluetooth related source and settings reverted..
v2.5
--Updated to Android 6.0.1_r30
--Screen touching issue during call fixed
--Busybox removed (If you need it, you can find it on PlayStore)
--Bluetooth call audio issue fixed (verified by 3 testers) ( Fix in
this post )
--Advanced settings fc issue in messaging fixed
--Built-in root (in Dev. Settings) has not removed but If you want to use it, after activated it, reboot the phone
--Call recording feature (in Dialer) temporary removed
--Sqlite updated
--Twrp device tree compatibility enhanced
--maybe more a few things
v2.4
--Soft Reboot issue fixed
--
-Kcal (Advanced color control) support added..
--Annoying and always showing "slow charging" bug fixed.. For Usb charging, showing "Charging" and for AC charging, showing "Charging rapidly"
--As always, CM updates...
v2.3
--Kernel updated to v2.7
--Audio enhanced (For better game sound experience, added some files by
@Jairus J. )
--Random screen touches issues during call must be fixed
--Latest CM updates
--Other minor fixes
v2.2
--Kernel linux updated to 3.4.111 (v2.6) ( Compiled with Linaro GCC 4.9 toolchain - Christpher83- )
--Audio settings fully reverted and re-fixed for game(s)
--AudioFx again added to v2.2
--F2fs updated with latest imp.'s
--Proximity sensor fixed
--Selinux, Sqlite, Sepolicy, etc.. updated/upgraded
-- and more
v2.1
--Kernel upgraded and updated to v2.5 (Linux ver. 3.4.110)
--F2fs and fauxclock supported as previous ver.
--Kernel name changed
--Compiled with latest and optimized UBERTC 4.9.4 toolchain
--Bluetooth, Gpu and sound updated
--New governors and schedulers added (Cpu&Gpu)
--Overclockable to 2.72 GHz
--Some opt. added and applied (Please wait for 5-10 min. after first boot to be stable)
--Audio settings reverted and fixed again
--Cm ver. name changed to
[email protected]
--And more&more..
v2.0
--Lock screen bottom button visibility issue fixed
--FauxSound integrated (I don't have FauxSound Control app. so not tested but must OK)
--Audio settings partially reverted.
--Kernel Updated to v2.0
--Bluetooth drivers updated and re-fixed
--Ambient Display again works..
--T-Mo and Can version support re-edited for Twrp recovery..
--Call recording support added.. (Please do not say "Why or Pure?" because this is my decision)
--Cm Weather imp. already include in rom but not ready yet.. CM team still work on it.
--And of course, CM fixes and imp. until this night..
v1.9
--Skype fully working now ( over Wi-Fi and mobile internet tested ). All tests made in the variable time intervals.
--Ext-SdCard writable for all fs (ext4, exfat, f2fs, ntfs).
--Sound -volume- levels increased for all paths
--Ramdisk patched for new systemless Supersu.. After flashing Supersu, reboot to system normally.. No anymore press the Power on button
--Kernel updated to v1.7 but you'll still see same version be v1.5.. Because I forgot to update it
--Re-based Purify system
v1.7a
Sdcard is not writable issue fixed (Reverted cherry-pick)
Skype mic. sound fixed.. at least I think so.. I need report
v1.7
Navbar enable/disable via settings (For screenshots, go to this post
When it enable, capacitive touchkeys will be disable
Only home key will stay active (Menu and back keys disable)
Default kernel required for Navbar and HW keys disabler. Not tested with other kernels yet but It must works
Latest CM fixes, imp., etc...
Minor system improvements
v1.6
- Enhanced device support (Eur, T-Mo, Can)
- Incompability fixes..
- Code cleanup for perm., kernel, etc..
- Speed and stability fixes
- CM latest fixes...
- and more....
Code:
v1.5
[LIST]
[*]Navbar ( Softkey) button support added. For now, in test phase. So HW key disabler feature will not work (for security)
[*]Minor and major improvements added
[*]Clock settings force close fixed
[*]F2fs support stay in v1.5 but only data/cache partition supported. System partition not supported anymore for f2fs.
[*]And possibly I forgot a few
[/LIST]
Code:
[SIZE=3]v1.4
Missing Doze settings implemented again...
CM made some fixes since last build so I integrated last modifications to Purify in v1.4[/SIZE]
Code:
v1.3 ---
Fully f2fs Supported.. How to >>> in FAQ
Hltemo (T-Mo) native support
Kernel updated to v1.5
Busybox integrated
Latest CM fixes, implements, etc..
Code:
V1.1- CM updates, fixes, etc..
