[PX3] Peugeot 407 - Factory parking sensors - steering wheel buttons

[superlesio]

Hello All,

From few days I'm owner of PX3 device for my Peugeot 407. I've go two issues which I'cant solve. I'm using original ROM

Factory parking sensor

It doesn't work with delivered CAN Bus (BAGOO PSA-BG-02 SW: V002)
In product description is information that should be supported, but it doesn't.

On aliexpress comments I've found the tip that I should cut the pink cable to make it working again. Anyway it doesn't work. I've also try to disconnect each single cable from CAN Bus but it doesn't help as well.
Did anyone have a similar problem and resolve it ? On you tube I've found the information that additional CAN Bus interface should help, but maybe is the different solution ?

- Can I check somehow if any parking sensor signal are received by head unit ?
- Maybe I've got old version of CAN Bus ?
- Any others ideas ?

Buttons on steering wheel

In my device only buttons volume up / down work fine, others not. I'm not able to map them with the mapping apps (delivered with the device and from play shop)

Any way I can notice the reaction when I press them.
For example. When I wan't to find next station on radio. I need to press voice command button and then it works only one, then I need to press first button again.

I was wondering if the customize ROM e.g. by Malaysk can help with this issues ? Or is not the case ?

Thanks for your answers in advance.

 

[Diablo3177]

same problem

Hello,
I have the same problem. I think it's a problem with the can-bus decoder. Have you been able to solve it?

 

[superlesio]

Hello,
I have the same problem. I think it's a problem with the can-bus decoder. Have you been able to solve it?

Hi Diablo3177,

Not at all . I've installed Malaysk ROM, updated MCU and it hasn't help.

I alslo guess that is all about can-bus adapter. I will probably give up and istall extra parking sensor and remote on the steering wheel. It should work

Anyway please let me know if you find working solution.
I believe is possible:

https://youtu.be/lj3n35pUvhg

I've tried to contact with the guy from video, but he hasn't answer.

 

[Mixer88]

Hi,
Have you maybe resolve this problem? I have this two problems allso...

 

[Frazzy]

I have contacted the guy of the video. He gave me a update for my headunit and told me that the bagoo won't work in our car.

He is going to send me another canbus adapter. He lives in Turkey and I live in the Netherlands so it can take a while before I let you know if it works.

Frans

 

[Frazzy]

And that was the problem. The Bagoo is the wrong Canbus converter. I bought the one from the guy in Turkey and now everything works like expected.

 

[Peixeiro]

Hi Frazzy,

Can you show your new canbus (photos and where we can buy) and share the update firmware?

 

[Frazzy]

This is the one I have now.

I bought it from him in turkey but its 25 euro shipping and 30 Euro money transfer. So I would look further if you are not desperate.

The update is specific to my head unit I think and it does nothing without the canbus adapter.

 

[Peixeiro]

Thank for the replay. In the photo we cannot see all model number and software version.

But, now your Peugeot 407 original parking sensors, AC, Buttons on steering wheel, ... work well?
And the vehicle information, link "open doors", seatblets, lighs that don't work, errors, ... are all displayed?

 

[Frazzy]

This is a better foto

Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.

Better image is attached

 

[mino1402]

This is a better foto

Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.

Better image is attached

What about temperature unit? Can you set the temperature unit to celsius? How many cabels are connetcted to connector from canbus decoder?

 

[Frazzy]

Temperature's ar in Celsius. You can count the wires in the first image. The black and white one are going to the external backup buzzer.

 

[esiukw]

This is a better foto

Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.

Better image is attached

where could I buy it ?? I also have 407 but I have parking sensors, the problem is only on the steering wheel that only the volume change works

 

[Musti222]

Do some of you have an issue with the speaker for the parking sensors? Mine is on very low volume and I don't know how to increase it

 

[superlesio]

Hi Guys,

Has anyone found the shop when the working cunbus may be bought ? I've found some on aliexpess (some on photos look very simiar for the Frazzy's one). However, all sellers wrote me back that it can't be sold separately. Only with the central unit from their store :/

 

[Alex Dutescu]

This is a better foto

Everything works perfect. Also doors opening and closing is instant now and not laggy. all the buttons on the stearing column work to. I haven't found anything that isn't working yet.

Better image is attached

You posted 2 pictures with 2 different CANBUS decoders. On the first one it says For: Peugeot 20X(something) it's not readable but most probably is for 207.
The second picture says For Peugeot 407. Which one is working?


I also found a website (google RoadNavi i can't put external links yet) where these canbus adapters can be ordered separately, but i really need to know what model to order.
I also have the Bagoo canbus adapter and it won't take AC commands, stering wheels, passengers side input any many others ... it also broke my right Air flaps and had to service the car and dismount the whole dashboard. I fixed everything and mounted the original audio unit back untill i will find a fix for this problem.

 

[Frazzy]

You are the only one paying attention

The second one is the correct one.

 

[Lazyass123]

You are the only one paying attention

The second one is the correct one.

Hi Frazzy,

I see there is no PX5 8 core 4 GB RAM for 407 from Mekede just PX3 4 core 2 GB....


if I buy this unit for my 407 Year 2009 vvv. ebay . c om/itm/112926331486?ul_noapp=true

will I get right can bus decoder or I will need to buy that one from Turkish guy for all stuff working (A/C control, front/rear park assist, board/trip computer, settings of car, steering wheel controls... ) ?



Thanks for help

L

 

[Frazzy]

I really don't know. I'm no expert in this stuff. I just found the guy with the working canbus adapter.

If you are getting a bagoo than it won't work.

By the way, on AliExpress they have px5's as well.

 

[Peixeiro]

if I buy this unit ...will I get right can bus decoder

As I know, it's a lucky to buy with the correct can-bus decoder. All canbus sell with this units work with the basic functions of the 407, but the new versions also have resolve the problems with AC, steering keys, parking sensors, ...

Maybe you can contact the seller and ask for the version of canbus decoder or share with him the photo of this working decoder...