[Q&A] Hyperdrive Rom Note 10.1 2014 ║ Non-Development Discussion ║ Support

[sbreen94]

[Q&A] Hyperdrive Rom Note 10.1 2014 ║ Non-Development Discussion ║ Support

Hyperdrive Rom Support Thread​

This Thread is Started for Help and Support for those Members who cannot post in development threads or do not have enough posts to do so.

• You may ask your general questions/issues here.
  
• Please respect all members, especially those trying to provide you with help.
  
  
• Please read the Frequently Asked Questions in the Rom Thread HERE before asking questions

Thank you

 

[samik1994]

smart scrolling ???

Hello ,
I flashed Hyperdrive+RLS3 after wipe data/cache/dalvik cache ,
with hope that smart scroll will work , but it's not working at all,apart from flashing eye in notification panel.
Please solve that problem some how ....
By the way nice work on rom :good: and .

 

[phyden]

Missing Lock Settings?

To begin, I am reporting a (possible) bug for Hyperdrive RLS3 on my SM-P600 on TWRP 2.7.0.2. I have verified the md5 on my zip prior to each flash. I have been able to replicate/repeat this "bug" on multiple installs (where I have fully/cleanly wiped the device each time).

I've found that my lock screen security detailed options are forever set to those for "swipe" regardless of what I have chosen for my lock screen security option. Even if I set a pattern, pin, password, etc. lock, the options below are always set to those as if I had chosen "swipe" as my lockscreen setting. The lock option that I am selecting still works, but I am unable to see or tweak any of the specific settings associated with each of the particular lock screen security options (e.g. I am unable to toggle the visibility of my pattern, as this option doesn't appear, if I choose the "pattern" lock option. However, the device still asks me for a pattern to unlock with). I can only ever see/modify the "swipe options" such as the "unlock effect", "ink effect", etc.

Is anyone else having this problem too?

 

[shooterf15]

Good day all, I just installed rls3 and everything is working fine so far except the penwindow/multi window manager. Adding the apps I want follwed by saving and rebooting does not do anything for me? Anybody have the same issue or am I not doing to correctly?

 

[sbreen94]

Good day all, I just installed rls3 and everything is working fine so far except the penwindow/multi window manager. Adding the apps I want follwed by saving and rebooting does not do anything for me? Anybody have the same issue or am I not doing to correctly?

Observed, I will look into it and hopefully fix

 

[Whistler1813]

Latest Netflix Working

I have installed RLS3.1 and Netflix v.3.7.1 is working fine for me…no xposed module and no version rollback.
Here are a few of the choices I made when installing Hyperdrive. Maybe this information can help the developer or other users figure out where the problem with signing in is (or isn’t).

I steered clear of many of the eye candy options simply due to personal preference.
I mainly use Hyperdrive for the fixes, battery life and speed compared to stock.

Full system wipe through TW…not just data/cache.
Hyperdrive TW Note 10.1 Launcher
Hyperdrive Light Note Pro UI
Very few of the Samsung apps (Dropbox, Font Pack, Link, STranslate)
No Weather Widget
No Email App (I use K-9)
No Audio Mod
Stock Note Boot Animation
Ad Blocking
ES File Manager (even though I use X-plore)
Very few Google AOSP (Maps, Youtube, Camera)
Samsung Music Player
No additional keyboard (I use Dashlane’s)
Tubemate
Stock 4.4 Kernel

Once set up I installed Nova Launcher, TiBu, Lux and Greenify.
I also used ROM Toolbox to edit build.prop product model entry to say SM-P600 instead of SM-T800.
The only HD Tweaks are show Network Traffic, Date Style, Battery Style, and Ink Effect.
The only xposed modules active are App Settings, Greenify, and NlpUnbounce.
That’s about it for system related apps/settings.

I hope this helps.

 

[ultim]

Not certain but that change might have fixed netflix app for me.

I made the change, rebooted, cleared the app cache and i could sign in. I couldn't before.

I also used ROM Toolbox to edit build.prop product model entry to say SM-P600 instead of SM-T800.

 

[Whistler1813]

Not certain but that change might have fixed netflix app for me.

I made the change, rebooted, cleared the app cache and i could sign in. I couldn't before.

That's good to know. If that is, in fact, the fix then it's a heck of a lot easier for folks to implement than re-wiping and selecting different system mods.

I hope some other Hyperdrive folks that are having problems with Netflix try this out as well. I'm also wondering if maybe the model number mismatch is causing some app or system issues that only seem to affect certain people and not others with otherwise the exact same configuration.

 

[Na9iir]

wake up problem

Everything works totally fine except wake up it takes 5-8 sec ... can u please help

 

[unstabl1]

Donation

Long time lurker, and have never signed in to post before, therefore I don't have enough posts to write in the Development section, but I just wanted you to know Scott I just slid you $40.00 for a new tablet. Keep this awesome rom moving onwards!

Transaction Id: 55K23427EM124153F

 

[sbreen94]

Long time lurker, and have never signed in to post before, therefore I don't have enough posts to write in the Development section, but I just wanted you to know Scott I just slid you $40.00 for a new tablet. Keep this awesome rom moving onwards!

Transaction Id: 55K23427EM124153F

Thanks for your support!

 

[scarmona]

Not sure if it's a kernel or rom issue but I'm on hyperdrive 3.0 with xluco and I bought this dual flashdrive:

Kingston Digital 64GB Data Traveler Micro Duo USB 3.0 Micro USB OTG (DTDUO3/64GB) https://www.amazon.com/dp/B00LIXJ54K/ref=cm_sw_r_awd_uVaqub148TMN0

Which works perfect on my S4 with KK, it gets detected without problems by the SM-P600 but I cannot explore with either My Files or ES Explorer, it gives me a systemui FC.
Anybody else can test?

Sent from my SGH-I337M using Tapatalk

 

[ViperBoy2]

refurbed Note 10.1

Newegg has refurbished 16GB notes for $350 now and Groupon matches and also has the 32GB for $20 more. Hopefully we'll see another Hyperdrive version - I'm planning on installing mine this week

 

[clandestine125]

Hyperdrive ROM, Pen window manager not working

So I installed Hyperdrive rom RLS 3.1 for my sm-p600, problem is that the pen window manager app is not working, I select my app (MX video player) in the options of pen window manager to enable it in pen mode but after restarting it still does not show up when i try to edit the apps available for pen windows using the s-pen

Edit: I fixed it, problem was that I have a separate app for the pen window manager that I restored using titanium backup. I uninstalled it in the play store and used the native pen window manager via the Hyperdrive rom tweak app..

 

[xdaprotege]

wiped to reinstall: cmd adb cant locate the device

I may seem like it, but im not a noob... long story short, Im dealing with a TBI, so im a bit rusty.

I have a sm-p600, flashed Chain fire with, installed nandroid and backed everything up, flashed 4.4.2 firmware with odin. I flashed twrp recovery and sideloaded hyperdrive custom rom via adb.

Everything was great, excellent rom! I had a few issues with it, mainly touchWiz would crash if I tried to change the lock screen wallpaper via pressing and holding the home screen. Also, settings would also randomly crash as well. I did some research through the forums and came to the conclusion that I might have messed up on selecting the options during installation (something with the launcher). SOOOO, my dumb a** attempts to re-install the rom. I factory reset, wiped, and cleaned the whole thing with bleach ( metaphorically aka twrp). I reboot in TWRP recovery, go to advanced--->sideload--->... then my win 7 pc fails to install the MTP drivers. I reboot, replug, "overlap drivers", get it to detect, but adb cant detect the device. So, I bust open ctrl panel uninstall the samsung drivers, adp drivers, and pdanet; then, i reinstalled different drivers that i found from another thread and i cant detect the device from cmd adb commands.

I think it might be a usb debugging issue, because if everything was left constant as far as drivers go and it was wiped, the issue must be occurring on the tablet.
I forgot about that thought when I woke up and messed around with the drivers downloading universal drivers and what not. Device manager now recognizes the device as google nexus adb interface but cmd adb still cant find the device.


Please help!

 

[Lazkano]

105

I have a question. I have used xkat 4 rom for two weeks and my battery life is 8,30-9 ours SOT. I know every device and user is different, but how many ours of SOT do you get with this rom? Just to know, because I am doubting to change to this rom.
Thank you

 

[xdaprotege]

should i start from scratch or throw the the custom rom on an external

I may seem like it, but im not a noob... long story short, Im dealing with a TBI, so im a bit rusty.

I have a sm-p600, flashed Chain fire with, installed nandroid and backed everything up, flashed 4.4.2 firmware with odin. I flashed twrp recovery and sideloaded hyperdrive custom rom via adb.

Everything was great, excellent rom! I had a few issues with it, mainly touchWiz would crash if I tried to change the lock screen wallpaper via pressing and holding the home screen. Also, settings would also randomly crash as well. I did some research through the forums and came to the conclusion that I might have messed up on selecting the options during installation (something with the launcher). SOOOO, my dumb a** attempts to re-install the rom. I factory reset, wiped, and cleaned the whole thing with bleach ( metaphorically aka twrp). I reboot in TWRP recovery, go to advanced--->sideload--->... then my win 7 pc fails to install the MTP drivers. I reboot, replug, "overlap drivers", get it to detect, but adb cant detect the device. So, I bust open ctrl panel uninstall the samsung drivers, adp drivers, and pdanet; then, i reinstalled different drivers that i found from another thread and i cant detect the device from cmd adb commands.

I think it might be a usb debugging issue, because if everything was left constant as far as drivers go and it was wiped, the issue must be occurring on the tablet.
I forgot about that thought when I woke up and messed around with the drivers downloading universal drivers and what not. Device manager now recognizes the device as google nexus adb interface but cmd adb still cant find the device.


Please help!

Sorry to double post, but can I just throw hyperdrive rom on a external sd and flash threw twrp? or do I have to download stock 4.4.2 firmware flash with odin, rootcheck/reroot, and sideload hyperdrive rom via sideload if it detects after the firmware flash?

 

[mikep2323]

Sorry to double post, but can I just throw hyperdrive rom on a external sd and flash threw twrp? or do I have to download stock 4.4.2 firmware flash with odin, rootcheck/reroot, and sideload hyperdrive rom via sideload if it detects after the firmware flash?

i just read real quick but yes you can put on ext. sd card and flash from there with twrp.Just make sure when you hit install your checking external card.It should show up.Are you already rooted ?Im having the same problem when trying to connect my tablet to my pc.It doesnt reconize it and i also cant pull any files off with a decompile program cause it doesnt or adb doesnt see it.

 

[xdaprotege]

Softbrick

i just read real quick but yes you can put on ext. sd card and flash from there with twrp.Just make sure when you hit install your checking external card.It should show up.Are you already rooted ?Im having the same problem when trying to connect my tablet to my pc.It doesnt reconize it and i also cant pull any files off with a decompile program cause it doesnt or adb doesnt see it.

I was rooted, but im not 100% sure I still am after i did the advance wipe. Twrp asks if I want to install super su right before I reboot, so I assume I am. I'm not exactly sure what you did and what your symptoms are, but I personally did a twrp advance wipe including the internal storage which was where my rom was located. As a result, the tablet is soft bricked b/c it doesnt have an OS.

You can use odin to AP/PDA flash the stock firmware, but it HAS to be the same firmware build version of your device before the brick occurred. AKA bricked on 4.4.2 custom kitkat, then flash stock 4.4.2 kitkat via odin. Just make sure the software is for your device and country before installing.(http://www.galaxynote3update.com/fi...-the-unbrick-and-recovery-guide-just-for-you/).

Here's a helpful link that you might find useful: http://forum.xda-developers.com/showthread.php?t=2608951


My question is: can I just flash the custom rom back onto the device or do I have to flash the orignal firmware?

 

[joeloosth]

Install on Note Pro

Hi I have the 12.2 Note Pro and was wondering if this ROM will work on it?