• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

General Q&A, tips, info Roll-up (Joying) FYT SC9853i

Search This thread

surfer63

Senior Member
May 4, 2010
3,743
1,440
Zwolle
hvdwolf.github.io
Last revised: 09 May 2020.

The models are manufactured/assembled by Joying, but the motherboard/MCU is made by FYT who also "make" the Android and system apps for the units. There are a number of FYT compatible units available, like Joying, Sinosmart, Zhan, Funrover, Flyaudio, Witson, T'eyes and multiple "unnamed/unbranded" units. Not all of the units of these companies are FYT units though.
This thread is not for discussing your issues in case "things" don't function or questions like "How can I ../ How do I ../Where can I find ../ etcetera. There are other threads for that. If you have good tips yourself, please add them.
Almost all Q&As and tips are collected from other or much older posts. Too many people to mention. Thanks all!
I hope this will remain a "work in progress"!

#1. Passwords:
Factory menu / Developer options: 3368
Backlight Current Adjustment: 5768
Door lock interference: 0000
To change home launcher: 8086

#2. Where can I find the latest (and/or older) firmwares for my Joying unit.
You will find them on the Joying website www.joyingauto.com inside the blog: Updated firmware.

#3. Should I always upgrade to the latest firmware?
Theoretically: YES. Bugs are fixed. New features are added. But..: sometimes new bugs are introduced.

#4. Are there other Howto's, Q&As, Tips available?
The Joying blog at https://www.joyingauto.com/blog/
The Youtube Joying Boyka channel.
The official Joying forum: https://forum-joyingauto.com/
Modding your Joying/FYT SC9853i unit without root: https://forum.xda-developers.com/an...modding-joying-fyt-sc9853i-unit-root-t3974357

#5. Will all my apps and data still be there when I flash my unit with a new firmware?
That depends on the contents of the file "updatecfg.txt" in the firmware. See the explanation in post #1 of Modding your Joying/FYT SC9853i unit without root

#6. Can I root my unit?
Yes, you can. See HowTo: Root Joying SC9853i Head Unit.

#7. I have my unit rooted. How can I (relatively) easy install mods or tweak my unit?
Use the "Joying_Extra_Tools" app (also JET apk) which allows you to install Radio, Bluetooth, main server (nokill) mods and tweak/optimize (immersive mode, overscan, DPI, etc.) your unit.

#8. All the apps are killed when the unit goes to deep-sleep. Can I change this?
The unit does indeed kill all apps upon going into "deep sleep", apart from a few system apps.
Solution 1
(No root required) By modifying the "skipkillapp.prop" as described in both post #1 and post #2 of Modding your Joying/FYT SC9853i unit without root, you can change this.
Solution 2
(No root required) Install a nokill mod using a prebuild flashable image from post #3 of the thread "Modding your Joying/FYT SC9853i unit without root". This mod deactivates the "kill_all_app" function in the main server app.
Solution 3
(root required) Install a nokill mod (using the JET apk). This mod deactivates the "kill_all_app" function in the main server app.
"Solution" 4
(No root required for "starting apps" activity) If you simply want "your" app available after deep sleep, a much "cleaner" way to do this is to use @bambapins FYTStarter apk that lets you autostart apps on "waking up" of the unit. See post #1149 of the "Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)" thread.
Alternative: You can assign any app to the "Navi app" setting inside the Joying settings. You can use Tasker/Easer/Llama/MacroDroid/Condi/Etcetera to start apps/do actions, etcetera after wake-up. Note that for some of these actions you need root access.

#9. I do not really care that apps are closed on going into deep sleep, but can I start some apps on waking up after deep sleep?
Like above topic: (No root required for "starting apps" activity) If you simply want "your" app available after deep sleep, a much "cleaner" way to do this is to use @bambapins FYTStarter apk that lets you autostart apps on "waking up" of the unit. See post #1149 of the "Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)" thread.
If you are rooted you can use FYTStarter to start the accessibility service. It is not necessary for root to be kept active: it is enough to install and launch FYTStarter only once, while you have root. Later, even if you remove root, the app will still be able to start the accessibility services.

#10. Can I make modifications to the apps on my unit without root?
On these SC9853i units, you partially can. See this Modding your Joying/FYT SC9853i unit without root

#11. Are there Custom ROMs for this unit?
No, currently not. It is unlikely they will be created, but you never know.

#12. The unit starts some default apps on certain hardware keys or "system actions". Can I change this (without root)?
Yes, you can for a number apps and a number of SRC/MOD Steering Wheel keys. see the "FYT HW OneKey app". It doesn't need root, but will also work with root.

#13. I did something stupid and now my unit is in a boot loop or does not get past the boot logo. Help!
See post #4 in the "Modding your Joying/FYT SC9853i unit without root" thread.

#14. The Bluetooth app can only pair a few number of devices. Can I change this?
Yes, but your device needs to be rooted. @seb21 has modified the Bluetooth app (based on 17 Sept 2019 firmware) which allows to pair any OBD device. See this post in the "Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)" thread. This BT-app will only work till the next reboot, then it is completely disabled!
See also #27.

#15. Sleep mode: How much power is used? How long will it last? When does it really switch off?
This is mostly based on the previous Sofia 3GR and PX5 units, but I don't think it has changed as there was no change either between the (2) sofia model(s) and the PX5 model.
When switching off the unit it is not immediately in "deep sleep" mode. This takes about 30~60 seconds (on the PX5/Sofias ~4 minutes). In this period power usage is about 0.5~0.75A. When in "deep sleep" mode power consumption drops to 0.01~0.02A. A healthy battery can take this for at least a month.
After 5~7 days your unit will still be completely switched off resulting in a cold boot on starting your car. Just to make sure your battery is not drained. Nobody did ever exact measurements of this "switch off" period.

#16. A 3 seconds push on the PWR button switches off my unit, or a drag down (2X) from the notifiction bar enables me to shutdown the unit. Is there a difference with the Contact "switch off"?
Yes, there is. Pushing the PWR buton or dragging down the notification bar to shutdown the unit will only shutdown Android, not the hardware, and the energy consumption will still be above ~0.5A, but also makes it awake instantly. Switching off the car using your key, will bring the unit to "deep sleep". Then it will take 1-2 seconds to wake up again.

#17. I have a VW/Skoda/Seat unit with CAN-bus, but no Steering wheel buttons on my steering wheel. Will a 3rd party Steering wheel controller work?
No, not directly. These units come with a "VW motherboard" and do not listen to the Key1/Key2 wires, but only to the CAN-bus. Disconnecting the wires from the CAN-bus to such a 3rd part SWC-controller will not help.
The best solution requires some technical skills and involves an Arduino Micro-Pro device and is described in the [Joying for VW] Universal steering wheel controls with arduino by @bambapin.
(For a PX5: Another option is to resolder a resistor on your motherboard as described here).

#18. On long drives or high external temperatures (in the tropics) my unit doesn't work fluent anymore and apps start "stuttering" (voice) or slowing down. What is happening?
Install an app that wil monitor the temperature of your unit. The chips/motherboards in these units can get really hot. The CPU will "throttle" itself to lower CPU-cycles to cool down. Another problem of too high temperatures is that the lifespan of the unit will be shortened. And still another issue is that these units are "cold soldered", meaning that due to tension in the soldering due to the high temperatures, CPU soldering connections might be broken causing a non-functioning or mal-functioning unit. There are several threads on this forum giving examples of heat-sinks, fans and combinations of both.

#19. How can I use split-screen on this unit?
solution 1
Use the "Touch Assistant apk", which is the "white dot" floating top-left in your screen. It has a split-screen option and it remembers! that you are in splitscreen mode.
Solution 2
Start your "first" app and "second" app. Go to the task-manager (rectangle) in the top-right of the notification bar. It will show your active and last-used (but possibly closed) apps. Drag your "first" app to the left. In the right window you will now find the task manager with the other apps. Select the app you want on the right. (Of course this also works the other way round if you drag your first app to the right).
Note: This version only supports a 50%/50% split. Some Androids support 33%/66% splits as well.

#20. With every key press I hear this annoying beep. How do I remove it?
Solution 1
BEFORE (re)flashing your unit, edit the file “config.txt” from the firmware zip.
Add the line "ro.fyt.amp_switch=0" (or change that line from "ro.fyt.amp_switch=1" to this "ro.fyt.amp_switch=0")
Solution 2
1. Open the Settings app
2. Go to Device -> Sound -> Keypad Tone
3. Switch it off

#21. What is the default DPI on these units? Some apps/fonts seem too big or too small for the screen.
The default DPI is 160 for the 1024x600 units. Some screens are 1280x720. Some badly written apps (including my own JET apk) do not display correctly. On the 1280x720 screens you could go to a DPI of 180 or 200. Above that the Joying/FYT apps will not be displayed correctly. Changing the DPI is currently only possible if you have your unit rooted!

#22. When my unit boots, the radio is always started. Can I prevent this from happening?
You can't stop this. Not on a Joying and not on any other unit. And note that the radio app is actually only an interface that forwards commands to and receives data from the radio chip via the MCU. It is not an active app like your mediaplayer that does everything in Android.
When the unit boots, the hardware is up and running long before Android is. That means that the radio chip and amplifier are already working before Android has even booted. That is why you hear the radio. And that is why every manufacturer starts the radio app on boot: to enable you to mute the radio channel from the app.
The radio is never switched off as it cannot be switched off. It is only muted.

#23. Can I modify the lines/frames I see when having a reverse camera and driving backwards?
Yes, you can, but not from the app or Settings.
  1. Unzip "190000000_com.syu.us.apk".
  2. In /res/drawable you will find dl1.png to dl35.png, and dr1.png to dr35.png (left and right). These are used for the "frames" when driving backwards.
  3. Change them, but keep the same resolution (size).
  4. rezip the apk
  5. use the "Creating an Allapp.pkg ..." from the "Modding your Joying/FYT....". Or in case you have rooted your unit you can directly replace the apk on your unit.
(There are more "frame" images in there, but I have no idea how to use them. Of course you could rename them if you want to use these)

#24. I only want to flash the MCU firmware, not the rest of the firmware. Can I do that?
There can be several reasons why you want to do this. Only(!) copy the "Stm32ud.bin" and the "lsec6521update" to a clean FAT32 formatted USB-stick/SD-card and put it in your unit. The flashing will start automatically.

#25. I want to flash a new firmware, but NOT the MCU firmware
Use your firmware of choice but remove(!) the "Stm32ud.bin" from the USB-stick/SD-card before flashing.
 
Last edited:

surfer63

Senior Member
May 4, 2010
3,743
1,440
Zwolle
hvdwolf.github.io
#26. Google Contacts sync? DON'T DO IT !!
When you flash your unit, you will most probably setup your Google account (Settings -> User -> Accounts). By default most of the synchronizing is switched on, including the Contacts sync.
Disable this as soon as possible!! Already since 2016 this is a bug in the FYT software. With sync on, the unit will delete all your contacts. (see video by John Molberg).
How to prevent this?
After setting up your google account, immediately disable Contacts sync.
When connecting your phone with your unit via Bluetooth, you can enable contact sync via BT.
Once your contacts have synced, I advice to alsodisable contact synv via BT. (Press the gear icon when connected and disable contact sync).
Note: After firmware flash always check your Google accounts contacts sync again. (The 20200407 erased my contacts again)
Tip: Export your contacts before firmware flash.
See this youtube video from John Molberg about the deletion.

#27. Improved Bluetooth Pairing (still far from perfect)
This is not a great solution. It is more a simple work-around.
Before flashing your firmware, you should update one line in the config.txt.
Set line "sys.fyt.bluetooth_type=1" to "sys.fyt.bluetooth_type=0". Now flash the firmware.
If you already flashed the firmware, you can do a "config.txt flash only" using my zip attached to this post.
See also #14.

#28. Order of Bluetooth pairing
Say you have an OBD2 dongle, it sometimes pairs immediately and it sometimes doesn't.
Disclaimer: Some will never pair. The Bluetooth ID-string need to contain OBD.
But:
  • your dongle is compatible, but it will still not pair.
  • your dongle is compatible but it will only pair using pincode 1234 (or whatever code).
First in the BT contect settings "forget" your paired phone(s). (Not only unpair but really remove them).
Now pair your OBD2 dongle. If necessary, first set the pincode in your unit to the pincode of your OBD2 dongle,
After having successfully paired your OBD2 dongle , you can now pair your phone(s) using the same pincode.

#29. Google Play Store does not start downloading.
This is a very annoying problem which I have regularly. It can be solved though.
Below options can be tried starting from the first. if it doesn't work, try the others one by one.
  1. In the Play Store app, tap the "hamburger" menu (3-lines top-left) and select "My apps and games" (But probably you were already there). Remove all apps from the update-queue. Reboot.
  2. Turn off auto-update for your apps.
  3. Go to Settings->Apps, and clear cache and data from the Google Play Store app. Reboot/retry.
  4. Go to Settings->Apps, and clear cache and data from Google Play Services (You might need to enable "show system (apps)"). Reboot/retry.
  5. Uninstall Google Play Store updates.
  6. Switch off downloading "only via Wi-Fi" (if also using a SIM card or if you can download via the hot-spot of your phone).
  7. Turn off 4G data transfer and turn it on again (if you use the hot-spot from your phone, turn Wi-Fi off/on and/or mobile data off/on).
  8. Sign out of your Google Account, restart your head unit and sign in again.
And you can look at this Google support article, or this one (more steps ..)
 
Last edited:
  • Like
Reactions: julien_blanche

acidikjuice

Member
Jun 20, 2014
20
17
Thank you for this! I realize you don't want people asking questions in this thread but more about posting solutions, so i'll attempt to add two I think are missing and you can always add your input:

Q: Everytime the head unit enters deep sleep, apps granted the Accessibility permission (such as Tasker, Automate, Launchers) might lose this permission. Anyway to prevent this?

A: This is due to services being shut off (post) when the MCU calls for deep sleep. There is no way to stop this. However, you can use FYTStarter APK (here) for restoring accessibility or other issues between 'deep sleep'.

Q: Third party apps and external keyboards are unable to control volume or other media controls. How to overcome?

A: Volume and some other keys/controls are preempted by the Joying/FYT software. You need to interact with the Joying/FYT services to control these aspects. This post here shows an example apk that can interact with Joying/FYT services to control volume and other aspects (and another version here and some easy to use apk for volume that are tested working here). You can write your own APK using same methods or take advantage of this apk to send intents/commands to control volume and so on. You can use Tasker or Automate to provide this control to other things. For example, use Automate to intercept 'VOL UP' from an external keyboard and then use APK command to send 'VOL UP' to Joying/FYT service (and thus restoring ability to control volume from external controls like Joycon controller or external keyboards).

Q: How can I interface Steering Wheel Controls (Can Bus or other) not supported by Joying/FYT drivers

A: You can always use Joycon interface adapter (http://www.exinterface.com/cpjexr/) to convert SWC and CAN bus commands into USB keyboard inputs. The Joying/FYT work with this but you do need to use third party apps to map keyboard inputs into meaningful actions (start an app for example). As mentioned in above Question, media keys might not work directly from keyboard (unable to control volume for example) and you need to work around that with additional APK, but it can be done.

Q: is there anyway to setup so that when i receive a bluetooth call, i can go back to [other app]?

A: If you have set Waze or [other app] as your Navi app (via Joying settings menu), tapping the Navi button on your screen should allow you to go back to Waze. But also: some apps can be allowed to take over the phone function. Example is Magic Earth and Osmand+. For both I can allow them to make/receive calls. It means that you see a bar on the bottom of the screen, but it is actually not the Joying dialer. So I am IN that app. Google Maps can do that as well and I assume Waze might be able to do is as well too.
Did you give Waze that authorization when Waze asked for it during first loading it? Because if you did, you are in Waze with a phone call overlay at the bottom. Therefore: you cannot go to Waze because you are already in Waze. (Quote from Surfer post)
 
Last edited:

surfer63

Senior Member
May 4, 2010
3,743
1,440
Zwolle
hvdwolf.github.io
i see there is many version of updates there, and i ask if i can only update with the last version or should i go over one by one with the updates ?
All updates are full updates. You can skip all intermediate updates and immediately go for the last version.
Note though that you have to look at the MCU version: G32 or G32 (assuming you have a Joying SC9853i)
 

maor23

Senior Member
Feb 19, 2014
387
2
All updates are full updates. You can skip all intermediate updates and immediately go for the last version.
Note though that you have to look at the MCU version: G32 or G32 (assuming you have a Joying SC9853i)

How can i know my mcu version? Like i see, in the last update from april 2020, there is only one link to download so i guess it good for all versions, no?

I also want to get some tips of it, maybe some recommended apps and etc..
 

surfer63

Senior Member
May 4, 2010
3,743
1,440
Zwolle
hvdwolf.github.io
How can i know my mcu version? Like i see, in the last update from april 2020, there is only one link to download so i guess it good for all versions, no?

I also want to get some tips of it, maybe some recommended apps and etc..

There is no MCU update in the latest firmware, so you are correct.

No tips about recommended apps. Other threads are for that.
And personally I consider it ********. Everyone has his own preference for certain apps.
 

surfer63

Senior Member
May 4, 2010
3,743
1,440
Zwolle
hvdwolf.github.io
so how can i know if i need os update or mcu update?
Check your system info.
You only need an OS or MCU update if something is bothering you. If everything works fine for you, don't bother to upgrade.

For me the necessity to upgrade is two-fold:
  • fixes for bugs that bother me like Google voice call. But after 3 firmware upgrades claiming they fixed it, they still haven't fixed that. Although I hardly answer to calls in the car, and almost never make calls, it is terribly annoying that every other brand unit (MTC, QD, Atoto, etc) can do that, including all built-in car brand media-systems, but not the FYTs.
  • Android security fixes. It is still not clear to me whether FYT includes security fixes in their new firmwares by patching their code with the offical Android security fixes. As I hope they are doing that, I still flash every new firmware to my unit. But that's just a blind hope that they do apply the security patches.
 

Lucasmrn

Member
Apr 29, 2020
8
2
Last revised: 22 December 2019.

The models are manufactured/assembled by Joying, but the motherboard/MCU is made by FYT who also "make" the Android and system apps for the units. There are number of FYT compatible units available, like (of course) Joying, Sinosmart, Zhan, Funrover, Witson and multiple "unnamed/unbranded" units. Not all of the units of these companies are FYT units though.
This thread is not for discussing your issues in case "things" don't function or questions like "How can I ../ How do I ../Where can I find ../ etcetera. There are other threads for that. If you have good tips yourself, please add them.
Almost all Q&As and tips are collected from other or much older posts. Too many people to mention. Thanks all!
I hope this will remain a "work in progress"!

Passwords:
Factory menu / Developer options: 3368
Backlight Current Adjustment: 5768
Door lock interference: 0000
To change home launcher: 8086

Where can I find the latest (and/or older) firmwares for my Joying unit.
You will find them on the Joying website www.joyingauto.com inside the blog: Updated firmware.

Should I always upgrade to the latest firmware?
Theoretically: YES. Bugs are fixed. New features are added. But..: sometimes new bugs are introduced.

Are there other Howto's, Q&As, Tips available?
The Joying blog at https://www.joyingauto.com/blog/
The Youtube Joying Boyka channel.
The official Joying forum: https://forum-joyingauto.com/
Modding your Joying/FYT SC9853i unit without root: https://forum.xda-developers.com/an...modding-joying-fyt-sc9853i-unit-root-t3974357

Will all my apps and data still be there when I flash my unit with a new firmware?
That depends on the contents of the file "updatecfg.txt" in the firmware. See the explanation in post #1 of Modding your Joying/FYT SC9853i unit without root

Can I root my unit?
Yes, you can. See HowTo: Root Joying SC9853i Head Unit.

I have my unit rooted. How can I (relatively) easy install mods or tweak my unit?
Use the "Joying_Extra_Tools" app (also JET apk) which allows you to install Radio, Bluetooth, main server (nokill) mods and tweak/optimize (immersive mode, overscan, DPI, etc.) your unit.

All the apps are killed when the unit goes to deep-sleep. Can I change this?
The unit does indeed kill all apps upon going into "deep sleep", apart from a few system apps.
Solution 1
(No root required) By modifying the "skipkillapp.prop" as described in both post #1 and post #2 of Modding your Joying/FYT SC9853i unit without root, you can change this.
Solution 2
(No root required) Install a nokill mod using a prebuild flashable image from post #3 of the thread "Modding your Joying/FYT SC9853i unit without root". This mod deactivates the "kill_all_app" function in the main server app.
Solution 3
(root required) Install a nokill mod (using the JET apk). This mod deactivates the "kill_all_app" function in the main server app.
"Solution" 4
(No root required for "starting apps" activity) If you simply want "your" app available after deep sleep, a much "cleaner" way to do this is to use @bambapins FYTStarter apk that lets you autostart apps on "waking up" of the unit. See post #1149 of the "Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)" thread.
Alternative: You can assign any app to the "Navi app" setting inside the Joying settings. You can use Tasker/Easer/Llama/MacroDroid/Condi/Etcetera to start apps/do actions, etcetera after wake-up. Note that for some of these actions you need root access.

I do not really care that apps are closed on going into deep sleep, but can I start some apps on waking up after deep sleep?
Like above topic: (No root required for "starting apps" activity) If you simply want "your" app available after deep sleep, a much "cleaner" way to do this is to use @bambapins FYTStarter apk that lets you autostart apps on "waking up" of the unit. See post #1149 of the "Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)" thread.
If you are rooted you can use FYTStarter to start the accessibility service. It is not necessary for root to be kept active: it is enough to install and launch FYTStarter only once, while you have root. Later, even if you remove root, the app will still be able to start the accessibility services.

Can I make modifications to the apps on my unit without root?
On these SC9853i units, you partially can. See this Modding your Joying/FYT SC9853i unit without root

Are there Custom ROMs for this unit?
No, currently not. It is unlikely they will be created, but you never know.

The unit starts some default apps on certain hardware keys or "system actions". Can I change this (without root)?
Yes, you can for a number apps and a number of SRC/MOD Steering Wheel keys. see the "FYT HW OneKey app". It doesn't need root, but will also work with root.

I did something stupid and now my unit is in a boot loop or does not get past the boot logo. Help!
See post #4 in the "Modding your Joying/FYT SC9853i unit without root" thread.

The Bluetooth app can only pair a few number of devices. Can I change this?
Yes, but your device needs to be rooted. @seb21 has modified the Bluetooth app (based on 17 Sept 2019 firmware) which allows to pair any OBD device. See this post in the "Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)" thread.

Sleep mode: How much power is used? How long will it last? When does it really switch off?
This is mostly based on the previous Sofia 3GR and PX5 units, but I don't think it has changed as there was no change either between the (2) sofia model(s) and the PX5 model.
When switching off the unit it is not immediately in "deep sleep" mode. This takes about 30~60 seconds (on the PX5/Sofias ~4 minutes). In this period power usage is about 0.5~0.75A. When in "deep sleep" mode power consumption drops to 0.01~0.02A. A healthy battery can take this for at least a month.
After 5~7 days your unit will still be completely switched off resulting in a cold boot on starting your car. Just to make sure your battery is not drained. Nobody did ever exact measurements of this "switch off" period.

A 3 seconds push on the PWR button switches off my unit, or a drag down (2X) from the notifiction bar enables me to shutdown the unit. Is there a difference with the Contact "switch off"?
Yes, there is. Pushing the PWR buton or dragging down the notification bar to shutdown the unit will only shutdown Android, not the hardware, and the energy consumption will still be above ~0.5A, but also makes it awake instantly. Switching off the car using your key, will bring the unit to "deep sleep". Then it will take 1-2 seconds to wake up again.

I have a VW/Skoda/Seat unit with CAN-bus, but no Steering wheel buttons on my steering wheel. Will a 3rd party Steering wheel controller work?
No, not directly. These units come with a "VW motherboard" and do not listen to the Key1/Key2 wires, but only to the CAN-bus. Disconnecting the wires from the CAN-bus to such a 3rd part SWC-controller will not help.
The best solution requires some technical skills and involves an Arduino Micro-Pro device and is described in the [Joying for VW] Universal steering wheel controls with arduino by @bambapin.
(For a PX5: Another option is to resolder a resistor on your motherboard as described here).

On long drives or high external temperatures (in the tropics) my unit doesn't work fluent anymore and apps start "stuttering" (voice) or slowing down. What is happening?
Install an app that wil monitor the temperature of your unit. The chips/motherboards in these units can get really hot. The CPU will "throttle" itself to lower CPU-cycles to cool down. Another problem of too high temperatures is that the lifespan of the unit will be shortened. And still another issue is that these units are "cold soldered", meaning that due to tension in the soldering due to the high temperatures, CPU soldering connections might be broken causing a non-functioning or mal-functioning unit. There are several threads on this forum giving examples of heat-sinks, fans and combinations of both.

How can I use split-screen on this unit?
solution 1
Use the "Touch Assistant apk", which is the "white dot" floating top-left in your screen. It has a split-screen option and it remembers! that you are in splitscreen mode.
Solution 2
Start your "first" app and "second" app. Go to the task-manager (rectangle) in the top-right of the notification bar. It will show your active and last-used (but possibly closed) apps. Drag your "first" app to the left. In the right window you will now find the task manager with the other apps. Select the app you want on the right. (Of course this also works the other way round if you drag your first app to the right).
Note: This version only supports a 50%/50% split. Some Androids support 33%/66% splits as well.

With every key press I hear this annoying beep. How do I remove it?
Solution 1
BEFORE (re)flashing your unit, edit the file “config.txt” from the firmware zip.
Add the line "ro.fyt.amp_switch=0" (or change that line from "ro.fyt.amp_switch=1" to this "ro.fyt.amp_switch=0")
Solution 2
1. Open the Settings app
2. Go to Device -> Sound -> Keypad Tone
3. Switch it off

What is the default DPI on these units? Some apps/fonts seem too big or too small for the screen.
The default DPI is 160 for the 1024x600 units. Some screens are 1280x720. Some badly written apps (including my own JET apk) do not display correctly. On the 1280x720 screens you could go to a DPI of 180 or 200. Above that the Joying/FYT apps will not be displayed correctly. Changing the DPI is currently only possible if you have your unit rooted!

When my unit boots, the radio is always started. Can I prevent this from happening?
You can't stop this. Not on a Joying and not on any other unit. And note that the radio app is actually only an interface that forwards commands to and receives data from the radio chip via the MCU. It is not an active app like your mediaplayer that does everything in Android.
When the unit boots, the hardware is up and running long before Android is. That means that the radio chip and amplifier are already working before Android has even booted. That is why you hear the radio. And that is why every manufacturer starts the radio app on boot: to enable you to mute the radio channel from the app.
The radio is never switched off as it cannot be switched off. It is only muted.

Can I modify the lines/frames I see when having a reverse camera and driving backwards?
Yes, you can, but not from the app or Settings.
  1. Unzip "190000000_com.syu.us.apk".
  2. In /res/drawable you will find dl1.png to dl35.png, and dr1.png to dr35.png (left and right). These are used for the "frames" when driving backwards.
  3. Change them, but keep the same resolution (size).
  4. rezip the apk
  5. use the "Creating an Allapp.pkg ..." from the "Modding your Joying/FYT....". Or in case you have rooted your unit you can directly replace the apk on your unit.
(There are more "frame" images in there, but I have no idea how to use them. Of course you could rename them if you want to use these)

I only want to flash the MCU firmware, not the rest of the firmware. Can I do that?
There can be several reasons why you want to do this. Only(!) copy the "Stm32ud.bin" and the "lsec6521update" to a clean FAT32 formatted USB-stick/SD-card and put it in your unit. The flashing will start automatically.

I want to flash a new firmware, but NOT the MCU firmware
Use your firmware of choice but remove(!) the "Stm32ud.bin" from the USB-stick/SD-card before flashing.

Hello ! did you have found how to replace Joying setting app from original android settings app ? thank you ! :)
 

Lucasmrn

Member
Apr 29, 2020
8
2
No. That is no longer possible. That was only possible on the Intel Sofia models.

Thank you for reply, and I have a last question, I have put other firmware ( Teyes SPRO). Firmware was very good and fully functionnal except bluetooth.

I have mod allapp.pkg and fytmanufacturer with my number of head unit, the message "ui and mcu does not match" disapear is very good, but i don't now how to configure my Bluetooth for recognize in this firmware.

Bluetooth version is: GOC_V1.0/2019:07:18:16:59:52_gocsdk2

When i put other firmware he say: "unknow blink" How i can solve it ? mod file ?

Thank you for help.
 

surfer63

Senior Member
May 4, 2010
3,743
1,440
Zwolle
hvdwolf.github.io
Thank you for reply, and I have a last question, I have put other firmware ( Teyes SPRO). Firmware was very good and fully functionnal except bluetooth.

I have mod allapp.pkg and fytmanufacturer with my number of head unit, the message "ui and mcu does not match" disapear is very good, but i don't now how to configure my Bluetooth for recognize in this firmware.

Bluetooth version is: GOC_V1.0/2019:07:18:16:59:52_gocsdk2

When i put other firmware he say: "unknow blink" How i can solve it ? mod file ?

The only reference I have is the bluetooth "blink_config.ini" inside "/system/res/bluetooth". Please check the differences between your original file and the Teyes SPRO file.

I am also very interested in this. Last week (or so) I already wrote that the T'eyes Pro FYT software seems to be way ahead of the Joying software. Can you share some insights? Pros? Cons?
Does Google voice calling work? And did it work on the Joying firmware?
 

Lucasmrn

Member
Apr 29, 2020
8
2
The only reference I have is the bluetooth "blink_config.ini" inside "/system/res/bluetooth". Please check the differences between your original file and the Teyes SPRO file.

I am also very interested in this. Last week (or so) I already wrote that the T'eyes Pro FYT software seems to be way ahead of the Joying software. Can you share some insights? Pros? Cons?
Does Google voice calling work? And did it work on the Joying firmware?

Thank you for Help my friend, I will try now. I don't Have a Joying head unit, it's a Ullgo head unit with fytmanufacturer = 108

I will get back to you quickly with specific details, link and all informations i can give you. I have test many sort of firmware on this forum but translation is very difficult on russian forum : https://4pda.ru/forum/index.php?showtopic=936715. This russian forum is a big library for mod our SC9853 head unit !

But I will test the best and after i will get back ;)

Sorry if my english is bad. I'm French :D
 

Top Liked Posts

  • There are no posts matching your filters.
  • 15
    Last revised: 09 May 2020.

    The models are manufactured/assembled by Joying, but the motherboard/MCU is made by FYT who also "make" the Android and system apps for the units. There are a number of FYT compatible units available, like Joying, Sinosmart, Zhan, Funrover, Flyaudio, Witson, T'eyes and multiple "unnamed/unbranded" units. Not all of the units of these companies are FYT units though.
    This thread is not for discussing your issues in case "things" don't function or questions like "How can I ../ How do I ../Where can I find ../ etcetera. There are other threads for that. If you have good tips yourself, please add them.
    Almost all Q&As and tips are collected from other or much older posts. Too many people to mention. Thanks all!
    I hope this will remain a "work in progress"!

    #1. Passwords:
    Factory menu / Developer options: 3368
    Backlight Current Adjustment: 5768
    Door lock interference: 0000
    To change home launcher: 8086

    #2. Where can I find the latest (and/or older) firmwares for my Joying unit.
    You will find them on the Joying website www.joyingauto.com inside the blog: Updated firmware.

    #3. Should I always upgrade to the latest firmware?
    Theoretically: YES. Bugs are fixed. New features are added. But..: sometimes new bugs are introduced.

    #4. Are there other Howto's, Q&As, Tips available?
    The Joying blog at https://www.joyingauto.com/blog/
    The Youtube Joying Boyka channel.
    The official Joying forum: https://forum-joyingauto.com/
    Modding your Joying/FYT SC9853i unit without root: https://forum.xda-developers.com/an...modding-joying-fyt-sc9853i-unit-root-t3974357

    #5. Will all my apps and data still be there when I flash my unit with a new firmware?
    That depends on the contents of the file "updatecfg.txt" in the firmware. See the explanation in post #1 of Modding your Joying/FYT SC9853i unit without root

    #6. Can I root my unit?
    Yes, you can. See HowTo: Root Joying SC9853i Head Unit.

    #7. I have my unit rooted. How can I (relatively) easy install mods or tweak my unit?
    Use the "Joying_Extra_Tools" app (also JET apk) which allows you to install Radio, Bluetooth, main server (nokill) mods and tweak/optimize (immersive mode, overscan, DPI, etc.) your unit.

    #8. All the apps are killed when the unit goes to deep-sleep. Can I change this?
    The unit does indeed kill all apps upon going into "deep sleep", apart from a few system apps.
    Solution 1
    (No root required) By modifying the "skipkillapp.prop" as described in both post #1 and post #2 of Modding your Joying/FYT SC9853i unit without root, you can change this.
    Solution 2
    (No root required) Install a nokill mod using a prebuild flashable image from post #3 of the thread "Modding your Joying/FYT SC9853i unit without root". This mod deactivates the "kill_all_app" function in the main server app.
    Solution 3
    (root required) Install a nokill mod (using the JET apk). This mod deactivates the "kill_all_app" function in the main server app.
    "Solution" 4
    (No root required for "starting apps" activity) If you simply want "your" app available after deep sleep, a much "cleaner" way to do this is to use @bambapins FYTStarter apk that lets you autostart apps on "waking up" of the unit. See post #1149 of the "Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)" thread.
    Alternative: You can assign any app to the "Navi app" setting inside the Joying settings. You can use Tasker/Easer/Llama/MacroDroid/Condi/Etcetera to start apps/do actions, etcetera after wake-up. Note that for some of these actions you need root access.

    #9. I do not really care that apps are closed on going into deep sleep, but can I start some apps on waking up after deep sleep?
    Like above topic: (No root required for "starting apps" activity) If you simply want "your" app available after deep sleep, a much "cleaner" way to do this is to use @bambapins FYTStarter apk that lets you autostart apps on "waking up" of the unit. See post #1149 of the "Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)" thread.
    If you are rooted you can use FYTStarter to start the accessibility service. It is not necessary for root to be kept active: it is enough to install and launch FYTStarter only once, while you have root. Later, even if you remove root, the app will still be able to start the accessibility services.

    #10. Can I make modifications to the apps on my unit without root?
    On these SC9853i units, you partially can. See this Modding your Joying/FYT SC9853i unit without root

    #11. Are there Custom ROMs for this unit?
    No, currently not. It is unlikely they will be created, but you never know.

    #12. The unit starts some default apps on certain hardware keys or "system actions". Can I change this (without root)?
    Yes, you can for a number apps and a number of SRC/MOD Steering Wheel keys. see the "FYT HW OneKey app". It doesn't need root, but will also work with root.

    #13. I did something stupid and now my unit is in a boot loop or does not get past the boot logo. Help!
    See post #4 in the "Modding your Joying/FYT SC9853i unit without root" thread.

    #14. The Bluetooth app can only pair a few number of devices. Can I change this?
    Yes, but your device needs to be rooted. @seb21 has modified the Bluetooth app (based on 17 Sept 2019 firmware) which allows to pair any OBD device. See this post in the "Joying Android 8.1 Intel Airmont eight-core 1.8GHz SC9853i (4GB RAM, 32GB flash)" thread. This BT-app will only work till the next reboot, then it is completely disabled!
    See also #27.

    #15. Sleep mode: How much power is used? How long will it last? When does it really switch off?
    This is mostly based on the previous Sofia 3GR and PX5 units, but I don't think it has changed as there was no change either between the (2) sofia model(s) and the PX5 model.
    When switching off the unit it is not immediately in "deep sleep" mode. This takes about 30~60 seconds (on the PX5/Sofias ~4 minutes). In this period power usage is about 0.5~0.75A. When in "deep sleep" mode power consumption drops to 0.01~0.02A. A healthy battery can take this for at least a month.
    After 5~7 days your unit will still be completely switched off resulting in a cold boot on starting your car. Just to make sure your battery is not drained. Nobody did ever exact measurements of this "switch off" period.

    #16. A 3 seconds push on the PWR button switches off my unit, or a drag down (2X) from the notifiction bar enables me to shutdown the unit. Is there a difference with the Contact "switch off"?
    Yes, there is. Pushing the PWR buton or dragging down the notification bar to shutdown the unit will only shutdown Android, not the hardware, and the energy consumption will still be above ~0.5A, but also makes it awake instantly. Switching off the car using your key, will bring the unit to "deep sleep". Then it will take 1-2 seconds to wake up again.

    #17. I have a VW/Skoda/Seat unit with CAN-bus, but no Steering wheel buttons on my steering wheel. Will a 3rd party Steering wheel controller work?
    No, not directly. These units come with a "VW motherboard" and do not listen to the Key1/Key2 wires, but only to the CAN-bus. Disconnecting the wires from the CAN-bus to such a 3rd part SWC-controller will not help.
    The best solution requires some technical skills and involves an Arduino Micro-Pro device and is described in the [Joying for VW] Universal steering wheel controls with arduino by @bambapin.
    (For a PX5: Another option is to resolder a resistor on your motherboard as described here).

    #18. On long drives or high external temperatures (in the tropics) my unit doesn't work fluent anymore and apps start "stuttering" (voice) or slowing down. What is happening?
    Install an app that wil monitor the temperature of your unit. The chips/motherboards in these units can get really hot. The CPU will "throttle" itself to lower CPU-cycles to cool down. Another problem of too high temperatures is that the lifespan of the unit will be shortened. And still another issue is that these units are "cold soldered", meaning that due to tension in the soldering due to the high temperatures, CPU soldering connections might be broken causing a non-functioning or mal-functioning unit. There are several threads on this forum giving examples of heat-sinks, fans and combinations of both.

    #19. How can I use split-screen on this unit?
    solution 1
    Use the "Touch Assistant apk", which is the "white dot" floating top-left in your screen. It has a split-screen option and it remembers! that you are in splitscreen mode.
    Solution 2
    Start your "first" app and "second" app. Go to the task-manager (rectangle) in the top-right of the notification bar. It will show your active and last-used (but possibly closed) apps. Drag your "first" app to the left. In the right window you will now find the task manager with the other apps. Select the app you want on the right. (Of course this also works the other way round if you drag your first app to the right).
    Note: This version only supports a 50%/50% split. Some Androids support 33%/66% splits as well.

    #20. With every key press I hear this annoying beep. How do I remove it?
    Solution 1
    BEFORE (re)flashing your unit, edit the file “config.txt” from the firmware zip.
    Add the line "ro.fyt.amp_switch=0" (or change that line from "ro.fyt.amp_switch=1" to this "ro.fyt.amp_switch=0")
    Solution 2
    1. Open the Settings app
    2. Go to Device -> Sound -> Keypad Tone
    3. Switch it off

    #21. What is the default DPI on these units? Some apps/fonts seem too big or too small for the screen.
    The default DPI is 160 for the 1024x600 units. Some screens are 1280x720. Some badly written apps (including my own JET apk) do not display correctly. On the 1280x720 screens you could go to a DPI of 180 or 200. Above that the Joying/FYT apps will not be displayed correctly. Changing the DPI is currently only possible if you have your unit rooted!

    #22. When my unit boots, the radio is always started. Can I prevent this from happening?
    You can't stop this. Not on a Joying and not on any other unit. And note that the radio app is actually only an interface that forwards commands to and receives data from the radio chip via the MCU. It is not an active app like your mediaplayer that does everything in Android.
    When the unit boots, the hardware is up and running long before Android is. That means that the radio chip and amplifier are already working before Android has even booted. That is why you hear the radio. And that is why every manufacturer starts the radio app on boot: to enable you to mute the radio channel from the app.
    The radio is never switched off as it cannot be switched off. It is only muted.

    #23. Can I modify the lines/frames I see when having a reverse camera and driving backwards?
    Yes, you can, but not from the app or Settings.
    1. Unzip "190000000_com.syu.us.apk".
    2. In /res/drawable you will find dl1.png to dl35.png, and dr1.png to dr35.png (left and right). These are used for the "frames" when driving backwards.
    3. Change them, but keep the same resolution (size).
    4. rezip the apk
    5. use the "Creating an Allapp.pkg ..." from the "Modding your Joying/FYT....". Or in case you have rooted your unit you can directly replace the apk on your unit.
    (There are more "frame" images in there, but I have no idea how to use them. Of course you could rename them if you want to use these)

    #24. I only want to flash the MCU firmware, not the rest of the firmware. Can I do that?
    There can be several reasons why you want to do this. Only(!) copy the "Stm32ud.bin" and the "lsec6521update" to a clean FAT32 formatted USB-stick/SD-card and put it in your unit. The flashing will start automatically.

    #25. I want to flash a new firmware, but NOT the MCU firmware
    Use your firmware of choice but remove(!) the "Stm32ud.bin" from the USB-stick/SD-card before flashing.
    3
    Thank you for this! I realize you don't want people asking questions in this thread but more about posting solutions, so i'll attempt to add two I think are missing and you can always add your input:

    Q: Everytime the head unit enters deep sleep, apps granted the Accessibility permission (such as Tasker, Automate, Launchers) might lose this permission. Anyway to prevent this?

    A: This is due to services being shut off (post) when the MCU calls for deep sleep. There is no way to stop this. However, you can use FYTStarter APK (here) for restoring accessibility or other issues between 'deep sleep'.

    Q: Third party apps and external keyboards are unable to control volume or other media controls. How to overcome?

    A: Volume and some other keys/controls are preempted by the Joying/FYT software. You need to interact with the Joying/FYT services to control these aspects. This post here shows an example apk that can interact with Joying/FYT services to control volume and other aspects (and another version here and some easy to use apk for volume that are tested working here). You can write your own APK using same methods or take advantage of this apk to send intents/commands to control volume and so on. You can use Tasker or Automate to provide this control to other things. For example, use Automate to intercept 'VOL UP' from an external keyboard and then use APK command to send 'VOL UP' to Joying/FYT service (and thus restoring ability to control volume from external controls like Joycon controller or external keyboards).

    Q: How can I interface Steering Wheel Controls (Can Bus or other) not supported by Joying/FYT drivers

    A: You can always use Joycon interface adapter (http://www.exinterface.com/cpjexr/) to convert SWC and CAN bus commands into USB keyboard inputs. The Joying/FYT work with this but you do need to use third party apps to map keyboard inputs into meaningful actions (start an app for example). As mentioned in above Question, media keys might not work directly from keyboard (unable to control volume for example) and you need to work around that with additional APK, but it can be done.

    Q: is there anyway to setup so that when i receive a bluetooth call, i can go back to [other app]?

    A: If you have set Waze or [other app] as your Navi app (via Joying settings menu), tapping the Navi button on your screen should allow you to go back to Waze. But also: some apps can be allowed to take over the phone function. Example is Magic Earth and Osmand+. For both I can allow them to make/receive calls. It means that you see a bar on the bottom of the screen, but it is actually not the Joying dialer. So I am IN that app. Google Maps can do that as well and I assume Waze might be able to do is as well too.
    Did you give Waze that authorization when Waze asked for it during first loading it? Because if you did, you are in Waze with a phone call overlay at the bottom. Therefore: you cannot go to Waze because you are already in Waze. (Quote from Surfer post)
    2
    I did already see that the Google contacts issue is the same as on ours.

    I'M SO HAPPY ! :D

    I Have found How to install all firmware on my head unit and fully fonctionnal bluetooth and CAN control ! (without touch the MCU ! )

    1_ For bluetooth the solution is in the "config.txt" at the root of usb key and is very stupid, just replace "Sys.fyt.bluetooth_type=X" X is your number type ! In my case, the type in my original firmware config file the type is: sys.fyt.bluetooth_type=5 and i replace in Teyes config file "1" to "5"

    2_If you install other original firmware you have message: "ui and mcu does not match" Juste open allapp.pkg and modify fyt.prop line: fytmanufacturer=x (X is the original value in your firmware)

    I think you can try on your head unit, just download the lastest firmware and mod the file with my procedure: https://drive.google.com/file/d/1B-qCsn80P5wu2_fsF_YgCFOkqJvi3gR4/view

    I love Teyes firmware because he have great look, very smooth. Launcher quality in my opinion is best than Joying...
    Disadvantage for me: French Translation for the setting app is very bad. I think my next step is translate this app.

    Other Thing: I want to try CC2 firmware but have some problem with activation. I Will try to test other firmware and i will back to you ;)
    2
    Hi Surfer, This is a request from me. Is it possible to add a double tap option like the MTCE unit to the FYT HW OneKey app?
    -- Very short: No.

    -- Now the long answer:
    Normally in Andoid apps you have the GestureListener , the OnDoubleTapListener is part of that.
    However, my FytHWOneKey does not use that listeners. The FYT main server apk is the listener in combination with the MCU. Based on the (hardware) keys pressed it generates an event, which I duplicate, so the user can/need choose for the default action (like the media player) or something the user wants instead (another music player).

    I do nothing with the listeners. And the FYT main server and MCU do not listen to double-taps. The latest T'eyes models do support double-tap but I didn't check that.

    -- And further explanation:
    On the old Sofia models, the main server apk was modified in every release to start another method/function using the external script. There it was possible to act on taps and double-taps, because the script checked if the same key was pressed with (a user configurable) 0.2~0.4 seconds.
    My Xposed modules completely "replaced" the internal method/functions of the main server apk (that is what Xposed can do) and in my Xposed modules I had double-tap, because there I used my own routines.

    On a non-Xposed unit, or a non-modified main server apk, double-tap is not possible.
    By now it is clear that all FYTs using the same board/CPU are 100% compatible, granted you set two properties to correct for the reseller. And even that is done in the settings. Not in the software.

    I have already read that there is a new Xpsoed for Android 10 that "should" run on the uis7862. "Someone very brave" has to root his/her unit and install Xposed.
    Then my Xposed modules could be used again, of course requiring some modifications for the new 7862 unit.

    "Theoretically" I could also modify the main server apk again and deliver a main server apk with a new rebuild FYTHWOnekey.apk. And on a new firmware release modify the main server apk again if necessary. It is now after those years of experience also clear that the main server apk hardly changesand remains the same over all reseller models (same board/cpu).
    But I don't want to anymore. If someone wants to take over and need hints, I am happy to provide them.
    (This year I will probably buy a new (2nd hand) car and if I do, that one will certainly have an builtin navigation unit. I don't want to spend the time anymore. I am happy with the current functionality)
    1
    #26. Google Contacts sync? DON'T DO IT !!
    When you flash your unit, you will most probably setup your Google account (Settings -> User -> Accounts). By default most of the synchronizing is switched on, including the Contacts sync.
    Disable this as soon as possible!! Already since 2016 this is a bug in the FYT software. With sync on, the unit will delete all your contacts. (see video by John Molberg).
    How to prevent this?
    After setting up your google account, immediately disable Contacts sync.
    When connecting your phone with your unit via Bluetooth, you can enable contact sync via BT.
    Once your contacts have synced, I advice to alsodisable contact synv via BT. (Press the gear icon when connected and disable contact sync).
    Note: After firmware flash always check your Google accounts contacts sync again. (The 20200407 erased my contacts again)
    Tip: Export your contacts before firmware flash.
    See this youtube video from John Molberg about the deletion.

    #27. Improved Bluetooth Pairing (still far from perfect)
    This is not a great solution. It is more a simple work-around.
    Before flashing your firmware, you should update one line in the config.txt.
    Set line "sys.fyt.bluetooth_type=1" to "sys.fyt.bluetooth_type=0". Now flash the firmware.
    If you already flashed the firmware, you can do a "config.txt flash only" using my zip attached to this post.
    See also #14.

    #28. Order of Bluetooth pairing
    Say you have an OBD2 dongle, it sometimes pairs immediately and it sometimes doesn't.
    Disclaimer: Some will never pair. The Bluetooth ID-string need to contain OBD.
    But:
    • your dongle is compatible, but it will still not pair.
    • your dongle is compatible but it will only pair using pincode 1234 (or whatever code).
    First in the BT contect settings "forget" your paired phone(s). (Not only unpair but really remove them).
    Now pair your OBD2 dongle. If necessary, first set the pincode in your unit to the pincode of your OBD2 dongle,
    After having successfully paired your OBD2 dongle , you can now pair your phone(s) using the same pincode.

    #29. Google Play Store does not start downloading.
    This is a very annoying problem which I have regularly. It can be solved though.
    Below options can be tried starting from the first. if it doesn't work, try the others one by one.
    1. In the Play Store app, tap the "hamburger" menu (3-lines top-left) and select "My apps and games" (But probably you were already there). Remove all apps from the update-queue. Reboot.
    2. Turn off auto-update for your apps.
    3. Go to Settings->Apps, and clear cache and data from the Google Play Store app. Reboot/retry.
    4. Go to Settings->Apps, and clear cache and data from Google Play Services (You might need to enable "show system (apps)"). Reboot/retry.
    5. Uninstall Google Play Store updates.
    6. Switch off downloading "only via Wi-Fi" (if also using a SIM card or if you can download via the hot-spot of your phone).
    7. Turn off 4G data transfer and turn it on again (if you use the hot-spot from your phone, turn Wi-Fi off/on and/or mobile data off/on).
    8. Sign out of your Google Account, restart your head unit and sign in again.
    And you can look at this Google support article, or this one (more steps ..)