[Q] Acer Iconia A1 810 Scatter File Needed

Search This thread

Calingo

Senior Member
Oct 13, 2013
138
77
On The Dark Side
As The Title Says I Am In Need Of Acer Iconia A1 810 Scatter File As My Device Is Bricked And The Micro SD Port is Not Working I Dont Have Any Other Choice Rather Than Flashing It With SP Tool But Unfortunately I Dont Have The Scatter File :eek:

So If Anyone Out There Has The Same Device And Is Ready To Help :laugh:
You Are Most Welcome :highfive:

Thanks In Advance:rolleyes:
 

lucippo346

New member
Sep 10, 2014
1
0
Raw data

Please Quote Everyone Else Who Need Help

Here's How I Managed To Flash My Tablet with SP Flash tool
For raw files see


Tried Flashing ACER ICONIA A1 810 With SP Flash Tool Using The Raw Data Provided
Works Like Charm But You Need Modified Version Of SP Flash Tool Which Is Compactiable With A1 810/811 And Rest Is On the Thread Or Here You Go

Download flashtool here: click, unpack and launch it.
Press "File" → "Open Scatter-loading file..." and choose scatter from firmware folder.
Now press "Window" → "Write Memory". One more tab will appear, open it.
Press "Open Raw data" and choose "secuoff.img" file from firmware folder.
Choose an EMMC Memory setting
Start Address: 0x3D80000
Copy value from "File Size (bytes)" to "Container Length"
Press "Write Memory", connect your turned-off tablet to PC. Progress bar will fill with red, then with gray-green, then you will see a green circle. Disconnect your tablet.
Go to Download tab, press "Download" and connect your turned-off tablet again. Progress bar will fill with red, (probably) then with purple, then with yellow, (probably) then with gray-green. After this you will see a green circle. Disconnect your A1-810 from PC and put it on charging for 10 minutes.


Special And Only Thanks To FireDiamond For the above Guide and link to the special version of flash tool

Hi, can you post the correct link to Raw Data for Acer Iconia A1-810?
I need them to unbrick the mine.
Thx.
 

justin6162

Senior Member
Aug 2, 2009
68
7
yes please i need them too, please........

---------- Post added at 03:38 AM ---------- Previous post was at 03:37 AM ----------

i need the files pls

---------- Post added at 03:40 AM ---------- Previous post was at 03:38 AM ----------

Hi, can you post the correct link to Raw Data for Acer Iconia A1-810?
I need them to unbrick the mine.
Thx.

Please Quote Everyone Else Who Need Help

Here's How I Managed To Flash My Tablet with SP Flash tool
For raw files see


Tried Flashing ACER ICONIA A1 810 With SP Flash Tool Using The Raw Data Provided
Works Like Charm But You Need Modified Version Of SP Flash Tool Which Is Compactiable With A1 810/811 And Rest Is On the Thread Or Here You Go

Download flashtool here: click, unpack and launch it.
Press "File" → "Open Scatter-loading file..." and choose scatter from firmware folder.
Now press "Window" → "Write Memory". One more tab will appear, open it.
Press "Open Raw data" and choose "secuoff.img" file from firmware folder.
Choose an EMMC Memory setting
Start Address: 0x3D80000
Copy value from "File Size (bytes)" to "Container Length"
Press "Write Memory", connect your turned-off tablet to PC. Progress bar will fill with red, then with gray-green, then you will see a green circle. Disconnect your tablet.
Go to Download tab, press "Download" and connect your turned-off tablet again. Progress bar will fill with red, (probably) then with purple, then with yellow, (probably) then with gray-green. After this you will see a green circle. Disconnect your A1-810 from PC and put it on charging for 10 minutes.


Special And Only Thanks To FireDiamond For the above Guide and link to the special version of flash tool

can you upload raw and A1 810 With SP Flash Tool please
 

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Finally Got It

    What about putting the partition hex from A1 810 inside the MT6572 file?
    I tried to figure out how the whole scatter thing works but I'm kinda lost here:good:

    Btw you have 11 posts so try posting in dev threads, you should be OK now

    Modified The Scatter File And Works Thanks To
    For Helping :good:
    But I am Still Confused :confused: On how To Flash I can Figure Out Everything But The Problem :mad: Is My MTK Preloader Appears For Just A Couple Of Seconds And Then Disappears Maybe Theres A Method To Put Acer In MTK Preloader Mode Because I Tried To Download In that Couple Of Seconds And This Is What I Get
    2
    I meant, I tried the micro USB port in the tablet, but I don't know if a full-sized USB port would work instead ;)


    Please Quote Everyone Else Who Need Help

    Here's How I Managed To Flash My Tablet with SP Flash tool
    For raw files see


    Tried Flashing ACER ICONIA A1 810 With SP Flash Tool Using The Raw Data Provided
    Works Like Charm But You Need Modified Version Of SP Flash Tool Which Is Compactiable With A1 810/811 And Rest Is On the Thread Or Here You Go

    Download flashtool here: click, unpack and launch it.
    Press "File" → "Open Scatter-loading file..." and choose scatter from firmware folder.
    Now press "Window" → "Write Memory". One more tab will appear, open it.
    Press "Open Raw data" and choose "secuoff.img" file from firmware folder.
    Choose an EMMC Memory setting
    Start Address: 0x3D80000
    Copy value from "File Size (bytes)" to "Container Length"
    Press "Write Memory", connect your turned-off tablet to PC. Progress bar will fill with red, then with gray-green, then you will see a green circle. Disconnect your tablet.
    Go to Download tab, press "Download" and connect your turned-off tablet again. Progress bar will fill with red, (probably) then with purple, then with yellow, (probably) then with gray-green. After this you will see a green circle. Disconnect your A1-810 from PC and put it on charging for 10 minutes.


    Special And Only Thanks To FireDiamond For the above Guide and link to the special version of flash tool
    2
    Maybe if somebody could post their mtkdroid tools log.txt file it might be possible to figure why you can't make the scatterfile with droid tools. The device doesn't need to be rooted to make the file.
    Also I noticed that in your pic here Spflashtool shows the device as nand and I believe it has emmc type memory, maybe this has something to do with the scatter used as mt6572 are mostly nand devices.
    I think this device has the mt8125 chip which is part of the mt6589 quad core family.
    I don't have this device, just an interested spectator.
    1
    Scatter File

    Thanks For Viewing And Replying :good::highfive:
    If You have The Scatter File Please Send It Via Attachments I Cant Figure Out How To Make My own With The Image You Provided
    And The Forum Link You Shared Has A scatter File For A1 811 Not A1 810
    Please Help Me Its Been A Week :rolleyes:
    1
    4.2.2 zip won't install over 4.4.2, I tried already.
    You should aks again on toolkit thread, we need someone with root on 4.2 to grab that friggin scatter file via MTK tool