[Q] Android tvbox device.

Search This thread
By:
Advanced…
iamspeedbump

iamspeedbump

New member
Jan 5, 2013
2
3
Sacramento
Hello I purchased an android 4.0.4 car deck and I like to put cm10 on it. But I am having a few issue that I hope someone can help me with. The deck came already rooted. So here are some of my issue. Please help if you can. Thank you.

1.) "adb devices" works but "fastboot devices" does not. I am guessing I have the wrong usb drivers but I can not find any that make fastboot to work. Does anyone have any ideas?

2.) I need to get or create an image recovery file. I have CWM installed but unable to install recovery because the CWM says device is not supported. I have tried many key combination on the deck but unable to get it to reboot in recovery or boot loader. Rebooting in boot loader or recovery through adb or terminal emulator does not work. The device just reboots.

3.) Is there an CM10 out there that will work on my device?

---------------------------------------------------------------------
OS is Android 4.0.4 on an A10 1.0 ghz processor. It is a touch screen not a capacitive touch screen.

Below is what I get when I do "adb shell getprop"
---------------------------------------------------------------------
[audio.defCurve]: [false]
[audio.routing]: [2]
[dalvik.vm.heapgrowthlimit]: [48m]
[dalvik.vm.heapsize]: [256m]
[dalvik.vm.heapstartsize]: [5m]
[dalvik.vm.stack-trace-file]: [/data/anr/traces.txt]
[debug.egl.hw]: [1]
[dev.bootcomplete]: [1]
[dhcp..result]: [failed]
[dhcp.wlan0.dns1]: [10.0.0.1]
[dhcp.wlan0.dns2]: []
[dhcp.wlan0.dns3]: []
[dhcp.wlan0.dns4]: []
[dhcp.wlan0.gateway]: [10.0.0.1]
[dhcp.wlan0.ipaddress]: [10.0.0.10]
[dhcp.wlan0.leasetime]: [86400]
[dhcp.wlan0.mask]: [255.255.255.0]
[dhcp.wlan0.pid]: [498]
[dhcp.wlan0.reason]: [BOUND]
[dhcp.wlan0.result]: [ok]
[dhcp.wlan0.server]: [10.0.0.1]
[gsm.current.phone-type]: [1]
[gsm.operator.alpha]: []
[gsm.operator.iso-country]: []
[gsm.operator.isroaming]: [false]
[gsm.operator.numeric]: []
[gsm.sim.operator.alpha]: []
[gsm.sim.operator.iso-country]: []
[gsm.sim.operator.numeric]: []
[gsm.sim.state]: [UNKNOWN]
[gsm.version.ril-impl]: [aw-dataonly-ril-0.1]
[hwui.render_dirty_regions]: [false]
[init.svc.adbd]: [running]
[init.svc.bootanim]: [stopped]
[init.svc.console]: [running]
[init.svc.custom_init]: [stopped]
[init.svc.dbus]: [running]
[init.svc.debuggerd]: [running]
[init.svc.dhcpcd_eth]: [stopped]
[init.svc.dhcpcd_wlan0]: [running]
[init.svc.drm]: [running]
[init.svc.installd]: [running]
[init.svc.isomountmanager]: [running]
[init.svc.keystore]: [running]
[init.svc.media]: [running]
[init.svc.netd]: [running]
[init.svc.netshare]: [running]
[init.svc.preinstall]: [stopped]
[init.svc.ril-daemon]: [running]
[init.svc.securefile]: [running]
[init.svc.serial_touch]: [running]
[init.svc.servicemanager]: [running]
[init.svc.surfaceflinger]: [running]
[init.svc.u3gmonitor]: [running]
[init.svc.vold]: [running]
[init.svc.wpa_supplicant]: [running]
[init.svc.zygote]: [running]
[keyguard.disable]: [true]
[media.stagefright.maxsubfont]: [72]
[net.bt.name]: [Android]
[net.change]: [net.dnschange]
[net.dns1]: [10.0.0.1]
[net.dnschange]: [1]
[net.hostname]: [android-703ca2a006686b8b]
[net.qtaguid_enabled]: [1]
[net.tcp.buffersize.default]: [4096,87380,110208,4096,16384,110208]
[net.tcp.buffersize.edge]: [4093,26280,35040,4096,16384,35040]
[net.tcp.buffersize.gprs]: [4092,8760,11680,4096,8760,11680]
[net.tcp.buffersize.hspa]: [4094,87380,262144,4096,16384,262144]
[net.tcp.buffersize.lte]: [524288,1048576,2097152,262144,524288,1048576]
[net.tcp.buffersize.umts]: [4094,87380,110208,4096,16384,110208]
[net.tcp.buffersize.wifi]: [524288,1048576,2097152,262144,524288,1048576]
[net.wlan0.dns1]: [49.0.0.0]
[net.wlan0.dns2]: []
[persist.sys.country]: [US]
[persist.sys.language]: [en]
[persist.sys.localevar]: []
[persist.sys.profiler_ms]: [0]
[persist.sys.strictmode.disable]: [1]
[persist.sys.strictmode.visual]: [0]
[persist.sys.timezone]: [America/Los_Angeles]
[persist.sys.usb.config]: [mass_storage,adb]
[ro.allow.mock.location]: [1]
[ro.baseband]: [unknown]
[ro.board.platform]: [exDroid]
[ro.bootloader]: [unknown]
[ro.bootmode]: [unknown]
[ro.build.characteristics]: [tablet]
[ro.build.date.utc]: [1352280352]
[ro.build.date]: [Wed Nov 7 17:25:52 CST 2012]
[ro.build.description]: [apollo_tvbox-eng 4.0.4 IMM76D 20121107 test-keys]
[ro.build.display.id]: [apollo_tvbox-eng 4.0.4 IMM76D 20121107 test-keys]
[ro.build.fingerprint]: [softwinners/apollo_tvbox/apollo-tvbox:4.0.4/IMM76D/20121107:eng/test-keys]
[ro.build.host]: [hz-wjh]
[ro.build.id]: [IMM76D]
[ro.build.product]: [apollo-tvbox]
[ro.build.tags]: [test-keys]
[ro.build.type]: [eng]
[ro.build.user]: [hz]
[ro.build.version.codename]: [REL]
[ro.build.version.incremental]: [20121107]
[ro.build.version.release]: [4.0.4]
[ro.build.version.sdk]: [15]
[ro.carrier]: [unknown]
[ro.chip_type]: [a10]
[ro.com.android.dateformat]: [MM-dd-yyyy]
[ro.config.alarm_alert]: [Alarm_Classic.ogg]
[ro.config.notification_sound]: [pixiedust.ogg]
[ro.config.ringtone]: [Ring_Synth_04.ogg]
[ro.crypto.fs_flags]: [0x00000406]
[ro.crypto.fs_mnt_point]: [/data]
[ro.crypto.fs_options]: [barrier=0]
[ro.crypto.fs_real_blkdev]: [/dev/block/nande]
[ro.crypto.fs_type]: [ext4]
[ro.crypto.state]: [unencrypted]
[ro.debuggable]: [1]
[ro.display.switch]: [1]
[ro.factorytest]: [0]
[ro.hardware]: [sun4i]
[ro.kernel.android.checkjni]: [0]
[ro.machine.type]: [yho]
[ro.opengles.version]: [131072]
[ro.product.board]: [crane]
[ro.product.brand]: [softwinners]
[ro.product.cpu.abi2]: [armeabi]
[ro.product.cpu.abi]: [armeabi-v7a]
[ro.product.device]: [apollo-tvbox]
[ro.product.firmware]: [2.1.4]
[ro.product.locale.language]: [cs]
[ro.product.locale.region]: [CZ]
[ro.product.manufacturer]: [unknown]
[ro.product.model]: [tvbox]
[ro.product.name]: [apollo_tvbox]
[ro.revision]: [0]
[ro.runtime.firstboot]: [1357285145932]
[ro.secure]: [0]
[ro.serial.touch]: [1]
[ro.serialno]: []
[ro.setupwizard.mode]: [OPTIONAL]
[ro.sf.lcd_density]: [160]
[ro.softmouse.bottom.code]: [-1]
[ro.softmouse.left.code]: [-1]
[ro.softmouse.leftbtn.code]: [-1]
[ro.softmouse.midbtn.code]: [-1]
[ro.softmouse.right.code]: [-1]
[ro.softmouse.rightbtn.code]: [-1]
[ro.softmouse.top.code]: [-1]
[ro.udisk.lable]: [tvbox]
[ro.wifi.channels]: []
[rw.bluetooth.status]: [0]
[sys.boot_completed]: [1]
[sys.settings_secure_version]: [1]
[sys.usb.config]: [mass_storage,adb]
[sys.usb.state]: [mass_storage,adb]
[system_init.startsurfaceflinger]: [0]
[wifi.interface]: [wlan0]
[wifi.supplicant_scan_interval]: [15]
[wlan.driver.status]: [ok]
 
  • Like
Reactions: siamakmalki, YasinTugba and i<3droid
Sort by date Sort by votes
I

i<3droid

New member
Jan 7, 2013
1
0
I have a similar CarPC same stats. I am looking to accomplish similar things... though I would also like to remove the clumsy firmware(?) driven stereo interface.
 
Upvote 0 Downvote
P

Plumpy2007

Member
Dec 30, 2007
40
1
Android TVBox

iamspeedbump said:
Hello I purchased an android 4.0.4 car deck and I like to put cm10 on it. But I am having a few issue that I hope someone can help me with. The deck came already rooted. So here are some of my issue. Please help if you can. Thank you.

1.) "adb devices" works but "fastboot devices" does not. I am guessing I have the wrong usb drivers but I can not find any that make fastboot to work. Does anyone have any ideas?

2.) I need to get or create an image recovery file. I have CWM installed but unable to install recovery because the CWM says device is not supported. I have tried many key combination on the deck but unable to get it to reboot in recovery or boot loader. Rebooting in boot loader or recovery through adb or terminal emulator does not work. The device just reboots.

3.) Is there an CM10 out there that will work on my device?

---------------------------------------------------------------------
OS is Android 4.0.4 on an A10 1.0 ghz processor. It is a touch screen not a capacitive touch screen.
Click to expand...
Click to collapse


I have the same device.

I'm having an issue while in debug mode, to have Windows 7 64bit recognize the ANDROID device. It remains grayed in device manager.

Also, could you please elaborate how you managed to install CWM?

We are a small community with this devices, let's try to help each other :)
 
Upvote 0 Downvote
A

avishai0528

Senior Member
Feb 10, 2008
114
8
Holon
I also have "Knight Rider 7 Inch - CVIR-C130-2GEN with
android 4.0.4, , baseband 2.1.4, kernel 3.0.8+ hz@hz-wjh #692, build apollo_tvbox-eng 4.0.4 IMM76D 20121227 test-keys

i can't find nothing on the internet about it... no firmwares, no roms, nothing...


only 1 thing bothers me, when i'm inside the android and playing music... audio comes out only from front speakers.... from rear speakers and subwoofer nothing...
inside the sound category (settings) i found that it's using something called 'codec' i think the problem is somewhere over there.. maybe a new version of this "codec" or whatever it is will fix it... but still nothing on the net about it.

Solution:
Need to change in settings the GPS sound or something like this to on or off, don't remember exactly but it's now working :)
 
Last edited:
Upvote 0 Downvote
P

Plumpy2007

Member
Dec 30, 2007
40
1
Waze

avishai0528 said:
I also have "Knight Rider 7 Inch - CVIR-C130-2GEN with
android 4.0.4, , baseband 2.1.4, kernel 3.0.8+ hz@hz-wjh #692, build apollo_tvbox-eng 4.0.4 IMM76D 20121227 test-keys

i can't find nothing on the internet about it... no firmwares, no roms, nothing...


only 1 thing bothers me, when i'm inside the android and playing music... audio comes out only from front speakers.... from rear speakers and subwoofer nothing...
inside the sound category (settings) i found that it's using something called 'codec' i think the problem is somewhere over there.. maybe a new version of this "codec" or whatever it is will fix it... but still nothing on the net about it.
Click to expand...
Click to collapse

I'm still working on it connected to 12V @ home, and did not install in the car yet.
I was not able to install Waze, are you able to install it?
 
Upvote 0 Downvote
S

serg090909

Member
Feb 8, 2011
28
9
Plumpy2007 said:
I'm still working on it connected to 12V @ home, and did not install in the car yet.
I was not able to install Waze, are you able to install it?
Click to expand...
Click to collapse

http://xdaforums.com/attachment.php?attachmentid=1692264&stc=1&d=1359646086
http://xdaforums.com/attachment.php?attachmentid=1692265&stc=1&d=1359646086
http://xdaforums.com/attachment.php?attachmentid=1692266&stc=1&d=1359646086
http://xdaforums.com/attachment.php?attachmentid=1692267&stc=1&d=1359646086
 
Upvote 0 Downvote
S

serg090909

Member
Feb 8, 2011
28
9
rom android 4.0

serg090909 said:
http://xdaforums.com/attachment.php?attachmentid=1692264&stc=1&d=1359646086
http://xdaforums.com/attachment.php?attachmentid=1692265&stc=1&d=1359646086
http://xdaforums.com/attachment.php?attachmentid=1692266&stc=1&d=1359646086
http://xdaforums.com/attachment.php?attachmentid=1692267&stc=1&d=1359646086
Click to expand...
Click to collapse

прошивку устанавливать через livesuite 1.07.
мой email ustinov.81@mail.ru: Ковбой:
https://www.dropbox.com/s/v2eiwmq3j9zhn54/sun4i_crane_3g_yho_car_778.img
еше одну залью через час.
 
  • Like
Reactions: msbiju2002
Upvote 0 Downvote
iamspeedbump

iamspeedbump

New member
Jan 5, 2013
2
3
Sacramento
Hello All,

It has been sometime since I did my first post. I have not had much time to work on my deck as much I hope to. In my attempts to try to get the device to go into fastboot I bricked, it so I thought. After hours of trying to fix the issue I contacted the seller and they send me a download link for software and a video link on how to use the software. Well the software was LiveSuite and it contained an AllWinner image file. LiveSute and the AllWinner image file corrected my issue. But the most important thing to me was I now have an AllWinner image file that I can unpack to get the recovery.img, boot.img and system.img out of. Now I need to make the time to load software to retrieve the image files from the AllWinner image. But in the mean time I thought how could I get the recovery.img, boot.img and system.img file from the device it self. Well I did manage to get them with the help of other on the net.

Let me first say that I take no responsibility if you screw up your own device. The information I list is what worked on my device and it may not work on your device.

This is how I pulled recovery.img, boot.img and system.img from my device (tvbox "An android car deck") and onto my computer. The site that helped me do this is HERE .

::# system
::#--------------------------------------------------------------------------------
adb shell su -c "dd if=/dev/block/nandd of=/mnt/sdcard/system-backup.img"
adb pull /mnt/sdcard/system-backup.img d:\_roottvbox\Backups\system-backup.img
adb shell rm /mnt/sdcard/system-backup.img


::# recovery
::#--------------------------------------------------------------------------------
adb shell su -c "dd if=/dev/block/nandg of=/mnt/sdcard/recovery-backup.img"
adb pull /mnt/sdcard/recovery-backup.img d:\_roottvbox\Backups\recovery-backup.img
adb shell rm /mnt/sdcard/recovery-backup.img


::# boot
::#--------------------------------------------------------------------------------
adb shell su -c "dd if=/dev/block/nandc of=/mnt/sdcard/boot-backup.img"
adb pull /mnt/sdcard/boot-backup.img d:\_roottvbox\Backups\boot-backup.img
adb shell rm /mnt/sdcard/boot-backup.img

The recovery script on the site also works for me but I still can not get my car deck into recovery mode to use CWM. None of the keys on the deck respond to the android device inside the deck. To confirm that none of the key respond to the android device in the deck I used the following command "adb shell getevent -c 30". The "-c 30" is the number of key events before exiting getevent. Otherwise it will run for ever. After you execute "adb shell getevent -c 30" it will output the results to the screen whenever you press a button or the screen. After 30 event getevent will stop outputting the results.

So because none of the keys on the deck work for me I need to find another way to boot it in recovery mode. Every attempt I do to try to put the device into recovery mode only makes the device reboot. I have tried command line and there is an app out on the google play.

I am also able to get into fastboot. Using the site link above I was able to use the following commands.
adb shell
echo -n boot-fastboot | busybox dd of=/dev/block/nandf count=1 conv=sync; sync; reboot

When I do fastboot devices I get
???????????? fastboot
I think this is ok but not sure. I can do "fastboot reboot" and "fastboot reboot-bootloader" but the device only reboot. I believe I need to better understand how to use fastboot. There are many more commands that can allow me to flash and create. More research is needed.

Well this is all I have for know. My hope is to load CM10 but I need to find out where to get cm10 zip as well as getting CWM recovery working for an AllWinner A10 processor for my device. I did notice on another forum HERE that "Christian Troy" may have the solutions I need. I hope to contact him in the future.

2.jpg
 
Last edited:
Upvote 0 Downvote
S

serg090909

Member
Feb 8, 2011
28
9
iamspeedbump said:
Hello All,

It has been sometime since I did my first post. I have not had much time to work on my deck as much I hope to. In my attempts to try to get the device to go into fastboot I bricked, it so I thought. After hours of trying to fix the issue I contacted the seller and they send me a download link for software and a video link on how to use the software. Well the software was LiveSuite and it contained an AllWinner image file. LiveSute and the AllWinner image file corrected my issue. But the most important thing to me was I now have an AllWinner image file that I can unpack to get the recovery.img, boot.img and system.img out of. Now I need to make the time to load software to retrieve the image files from the AllWinner image. But in the mean time I thought how could I get the recovery.img, boot.img and system.img file from the device it self. Well I did manage to get them with the help of other on the net.

Let me first say that I take no responsibility if you screw up your own device. The information I list is what worked on my device and it may not work on your device.

This is how I pulled recovery.img, boot.img and system.img from my device (tvbox "An android car deck") and onto my computer. The site that helped me do this is HERE .

::# system
::#--------------------------------------------------------------------------------
adb shell su -c "dd if=/dev/block/nandd of=/mnt/sdcard/system-backup.img"
adb pull /mnt/sdcard/system-backup.img d:\_roottvbox\Backups\system-backup.img
adb shell rm /mnt/sdcard/system-backup.img


::# recovery
::#--------------------------------------------------------------------------------
adb shell su -c "dd if=/dev/block/nandg of=/mnt/sdcard/recovery-backup.img"
adb pull /mnt/sdcard/recovery-backup.img d:\_roottvbox\Backups\recovery-backup.img
adb shell rm /mnt/sdcard/recovery-backup.img


::# boot
::#--------------------------------------------------------------------------------
adb shell su -c "dd if=/dev/block/nandc of=/mnt/sdcard/boot-backup.img"
adb pull /mnt/sdcard/boot-backup.img d:\_roottvbox\Backups\boot-backup.img
adb shell rm /mnt/sdcard/boot-backup.img

The recovery script on the site also works for me but I still can not get my car deck into recovery mode to use CWM. None of the keys on the deck respond to the android device inside the deck. To confirm that none of the key respond to the android device in the deck I used the following command "adb shell getevent -c 30". The "-c 30" is the number of key events before exiting getevent. Otherwise it will run for ever. After you execute "adb shell getevent -c 30" it will output the results to the screen whenever you press a button or the screen. After 30 event getevent will stop outputting the results.

So because none of the keys on the deck work for me I need to find another way to boot it in recovery mode. Every attempt I do to try to put the device into recovery mode only makes the device reboot. I have tried command line and there is an app out on the google play.

I am also able to get into fastboot. Using the site link above I was able to use the following commands.
adb shell
echo -n boot-fastboot | busybox dd of=/dev/block/nandf count=1 conv=sync; sync; reboot

When I do fastboot devices I get
???????????? fastboot
I think this is ok but not sure. I can do "fastboot reboot" and "fastboot reboot-bootloader" but the device only reboot. I believe I need to better understand how to use fastboot. There are many more commands that can allow me to flash and create. More research is needed.

Well this is all I have for know. My hope is to load CM10 but I need to find out where to get cm10 zip as well as getting CWM recovery working for an AllWinner A10 processor for my device. I did notice on another forum HERE that "Christian Troy" may have the solutions I need. I hope to contact him in the future.

2.jpg
Click to expand...
Click to collapse
hi. I have android 4.0 insertion. there are recovery in rom.только I can't move in the menu buttons. there it is possible to choose an insertion in zip.

---------- Post added at 04:21 PM ---------- Previous post was at 04:03 PM ----------
serg090909 said:
hi. I have android 4.0 insertion. there are recovery in rom.только I can't move in the menu buttons. there it is possible to choose an insertion in zip.
Click to expand...
Click to collapse

http://yadi.sk/d/j-FltiEz2Hnkf livesuite
http://yadi.sk/d/rQdJihEx2Hnrs rom android 4.0
http://yadi.sk/d/PIJIIn202Hnuy rom 4.0+loading in recovery from the android: (
 
Upvote 0 Downvote
P

Plumpy2007

Member
Dec 30, 2007
40
1
Great work and findings!

Could you please share the AllWinner image file and video that they sent you?

---------- Post added at 04:08 PM ---------- Previous post was at 04:04 PM ----------
serg090909 said:
hi. I have android 4.0 insertion. there are recovery in rom.только I can't move in the menu buttons. there it is possible to choose an insertion in zip.

---------- Post added at 04:21 PM ---------- Previous post was at 04:03 PM ----------



http://yadi.sk/d/j-FltiEz2Hnkf livesuite
http://yadi.sk/d/rQdJihEx2Hnrs rom android 4.0
http://yadi.sk/d/PIJIIn202Hnuy rom 4.0+loading in recovery from the android: (
Click to expand...
Click to collapse

What does it mean "rom 4.0+loading in recovery", what is the procedure that is needed to go into recovery?

What is the ROM build and kernel (is it the same original TVBox)?

Are you able to install CWM recovery?

Thanks!
 
Upvote 0 Downvote
S

serg090909

Member
Feb 8, 2011
28
9
Plumpy2007 said:
Great work and findings!

Could you please share the AllWinner image file and video that they sent you?

---------- Post added at 04:08 PM ---------- Previous post was at 04:04 PM ----------



What does it mean "rom 4.0+loading in recovery", what is the procedure that is needed to go into recovery?

What is the ROM build and kernel (is it the same original TVBox)?

Are you able to install CWM recovery?

Thanks!
Click to expand...
Click to collapse
rom tvbox v.1.7 has built cmw. if you go to the (program's-settings-reset and reset) there is a point (in the Restart in recovery) but I can `t choose the buttons in the menu. You can enter the service mode in (WINCE-settings-on the control dial 1 3 5 7 9) it is possible to change the buttons to try zvuk.i cmw engine buttons (NAVI +) (eq-). I will upload photos to archive my tvbox. (program android system info) http://yadi.sk/d/-Bnl0p632IHod
 
Last edited:
Upvote 0 Downvote
P

Plumpy2007

Member
Dec 30, 2007
40
1
avishai0528 said:
Yeah, had no problem installing it... where exactly you are getting stuck at?
Click to expand...
Click to collapse


It said something about the SD card not having enough space.

I also tried swapping the internal with the Ext., but that did not help as well.

I believe the ROM is lousy, and once we can change the ROM and use recovery,
all problems will be solved.


On another note, I found that in the settings menu when you have GPS sound ON, it disables the subwoofer for music playing from Android, but when it is OFF, android music plays with subwoofer just fine.

I tried to run an FM app for Radio in Android, but it required earplugs, and would not run without it, so any idea on that would be great.

It would also be great is we can have bluetooth working in Android, so we don;t need the lame software that came with the headunit.
 
Upvote 0 Downvote
A

avishai0528

Senior Member
Feb 10, 2008
114
8
Holon
About waze, Make sure u have enough space on internal storage, use app2sd for easy moving. If that's not the issue then>>
I just had that error while trying to install xda on it, so I tried installing it with aptoide instead of google play store and it worked maybe this method will work for you..

About the gps, it is right what u wrote.. I found out about it couple of days after buying.
Youtube doesn't work for your testing? Why fm radio?

Sent from my tvbox using xda premium

---------- Post added at 10:18 PM ---------- Previous post was at 10:05 PM ----------

Just tried to install tunein radio and play store says my dvice is not supported, so I tried aptoide and managed to install it plus its running great!!

Sent from my tvbox using xda premium
 
Upvote 0 Downvote
A

avishai0528

Senior Member
Feb 10, 2008
114
8
Holon
Don't use app2sd ! :)
today when I went to work, the android started like I never installed anything.

---------------------

Edited:
Sorry for editing but I don't think the app2sd caused the problem, I think it happen because when I power off the engine of the car the android isn't turning off properly.
So I reinstalled everything, and now I'm using a 'Shutdown widget' before turning off the engine.
 
Last edited:
Upvote 0 Downvote
S

SSippi1973

New member
Mar 1, 2013
1
0
Help!

I have the this version(Android 4.0 Car Stereo DVD Player 3G WIFI GPS Navigation Double Din TouchScreen) it's on ebay but bought it from chinavasion and it's stuck in the bootloop for the android portion. Can someone please help me.. It's been stuck in the bootloop since I changed the wallpaper in android. I can't get it to go into the factory recovery mode.

Do I hold the vol + button and the power button until the car logo comes on or until the android picture that comes up just before the bootloader?
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

KidCarter93
  • Sticky
General **What phone should I buy next?** -- Not sure what device to buy? Ask here!
Replies
14K
Views
1M
K
Kill Face
P
[Q] Mt65xx Android Phone Driver
Replies
52
Views
532K
N
ngzek
S
How to put cheat codes in Gta sanandreas for android??
Replies
131
Views
676K
Oswald Boelcke
Oswald Boelcke
immortalneo
  • Sticky
General [HELP THREAD] Ask ANY Question. Noob Friendly.
Replies
51K
Views
2M
Omar_62
Omar_62
C
Question [Q] How to stream Android audio output to UPnp/Airplay/DLNA ... whatever
Replies
166
Views
486K
S
Sunport

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 3
    iamspeedbump
    iamspeedbump
    Hello I purchased an android 4.0.4 car deck and I like to put cm10 on it. But I am having a few issue that I hope someone can help me with. The deck came already rooted. So here are some of my issue. Please help if you can. Thank you.

    1.) "adb devices" works but "fastboot devices" does not. I am guessing I have the wrong usb drivers but I can not find any that make fastboot to work. Does anyone have any ideas?

    2.) I need to get or create an image recovery file. I have CWM installed but unable to install recovery because the CWM says device is not supported. I have tried many key combination on the deck but unable to get it to reboot in recovery or boot loader. Rebooting in boot loader or recovery through adb or terminal emulator does not work. The device just reboots.

    3.) Is there an CM10 out there that will work on my device?

    ---------------------------------------------------------------------
    OS is Android 4.0.4 on an A10 1.0 ghz processor. It is a touch screen not a capacitive touch screen.

    Below is what I get when I do "adb shell getprop"
    ---------------------------------------------------------------------
    [audio.defCurve]: [false]
    [audio.routing]: [2]
    [dalvik.vm.heapgrowthlimit]: [48m]
    [dalvik.vm.heapsize]: [256m]
    [dalvik.vm.heapstartsize]: [5m]
    [dalvik.vm.stack-trace-file]: [/data/anr/traces.txt]
    [debug.egl.hw]: [1]
    [dev.bootcomplete]: [1]
    [dhcp..result]: [failed]
    [dhcp.wlan0.dns1]: [10.0.0.1]
    [dhcp.wlan0.dns2]: []
    [dhcp.wlan0.dns3]: []
    [dhcp.wlan0.dns4]: []
    [dhcp.wlan0.gateway]: [10.0.0.1]
    [dhcp.wlan0.ipaddress]: [10.0.0.10]
    [dhcp.wlan0.leasetime]: [86400]
    [dhcp.wlan0.mask]: [255.255.255.0]
    [dhcp.wlan0.pid]: [498]
    [dhcp.wlan0.reason]: [BOUND]
    [dhcp.wlan0.result]: [ok]
    [dhcp.wlan0.server]: [10.0.0.1]
    [gsm.current.phone-type]: [1]
    [gsm.operator.alpha]: []
    [gsm.operator.iso-country]: []
    [gsm.operator.isroaming]: [false]
    [gsm.operator.numeric]: []
    [gsm.sim.operator.alpha]: []
    [gsm.sim.operator.iso-country]: []
    [gsm.sim.operator.numeric]: []
    [gsm.sim.state]: [UNKNOWN]
    [gsm.version.ril-impl]: [aw-dataonly-ril-0.1]
    [hwui.render_dirty_regions]: [false]
    [init.svc.adbd]: [running]
    [init.svc.bootanim]: [stopped]
    [init.svc.console]: [running]
    [init.svc.custom_init]: [stopped]
    [init.svc.dbus]: [running]
    [init.svc.debuggerd]: [running]
    [init.svc.dhcpcd_eth]: [stopped]
    [init.svc.dhcpcd_wlan0]: [running]
    [init.svc.drm]: [running]
    [init.svc.installd]: [running]
    [init.svc.isomountmanager]: [running]
    [init.svc.keystore]: [running]
    [init.svc.media]: [running]
    [init.svc.netd]: [running]
    [init.svc.netshare]: [running]
    [init.svc.preinstall]: [stopped]
    [init.svc.ril-daemon]: [running]
    [init.svc.securefile]: [running]
    [init.svc.serial_touch]: [running]
    [init.svc.servicemanager]: [running]
    [init.svc.surfaceflinger]: [running]
    [init.svc.u3gmonitor]: [running]
    [init.svc.vold]: [running]
    [init.svc.wpa_supplicant]: [running]
    [init.svc.zygote]: [running]
    [keyguard.disable]: [true]
    [media.stagefright.maxsubfont]: [72]
    [net.bt.name]: [Android]
    [net.change]: [net.dnschange]
    [net.dns1]: [10.0.0.1]
    [net.dnschange]: [1]
    [net.hostname]: [android-703ca2a006686b8b]
    [net.qtaguid_enabled]: [1]
    [net.tcp.buffersize.default]: [4096,87380,110208,4096,16384,110208]
    [net.tcp.buffersize.edge]: [4093,26280,35040,4096,16384,35040]
    [net.tcp.buffersize.gprs]: [4092,8760,11680,4096,8760,11680]
    [net.tcp.buffersize.hspa]: [4094,87380,262144,4096,16384,262144]
    [net.tcp.buffersize.lte]: [524288,1048576,2097152,262144,524288,1048576]
    [net.tcp.buffersize.umts]: [4094,87380,110208,4096,16384,110208]
    [net.tcp.buffersize.wifi]: [524288,1048576,2097152,262144,524288,1048576]
    [net.wlan0.dns1]: [49.0.0.0]
    [net.wlan0.dns2]: []
    [persist.sys.country]: [US]
    [persist.sys.language]: [en]
    [persist.sys.localevar]: []
    [persist.sys.profiler_ms]: [0]
    [persist.sys.strictmode.disable]: [1]
    [persist.sys.strictmode.visual]: [0]
    [persist.sys.timezone]: [America/Los_Angeles]
    [persist.sys.usb.config]: [mass_storage,adb]
    [ro.allow.mock.location]: [1]
    [ro.baseband]: [unknown]
    [ro.board.platform]: [exDroid]
    [ro.bootloader]: [unknown]
    [ro.bootmode]: [unknown]
    [ro.build.characteristics]: [tablet]
    [ro.build.date.utc]: [1352280352]
    [ro.build.date]: [Wed Nov 7 17:25:52 CST 2012]
    [ro.build.description]: [apollo_tvbox-eng 4.0.4 IMM76D 20121107 test-keys]
    [ro.build.display.id]: [apollo_tvbox-eng 4.0.4 IMM76D 20121107 test-keys]
    [ro.build.fingerprint]: [softwinners/apollo_tvbox/apollo-tvbox:4.0.4/IMM76D/20121107:eng/test-keys]
    [ro.build.host]: [hz-wjh]
    [ro.build.id]: [IMM76D]
    [ro.build.product]: [apollo-tvbox]
    [ro.build.tags]: [test-keys]
    [ro.build.type]: [eng]
    [ro.build.user]: [hz]
    [ro.build.version.codename]: [REL]
    [ro.build.version.incremental]: [20121107]
    [ro.build.version.release]: [4.0.4]
    [ro.build.version.sdk]: [15]
    [ro.carrier]: [unknown]
    [ro.chip_type]: [a10]
    [ro.com.android.dateformat]: [MM-dd-yyyy]
    [ro.config.alarm_alert]: [Alarm_Classic.ogg]
    [ro.config.notification_sound]: [pixiedust.ogg]
    [ro.config.ringtone]: [Ring_Synth_04.ogg]
    [ro.crypto.fs_flags]: [0x00000406]
    [ro.crypto.fs_mnt_point]: [/data]
    [ro.crypto.fs_options]: [barrier=0]
    [ro.crypto.fs_real_blkdev]: [/dev/block/nande]
    [ro.crypto.fs_type]: [ext4]
    [ro.crypto.state]: [unencrypted]
    [ro.debuggable]: [1]
    [ro.display.switch]: [1]
    [ro.factorytest]: [0]
    [ro.hardware]: [sun4i]
    [ro.kernel.android.checkjni]: [0]
    [ro.machine.type]: [yho]
    [ro.opengles.version]: [131072]
    [ro.product.board]: [crane]
    [ro.product.brand]: [softwinners]
    [ro.product.cpu.abi2]: [armeabi]
    [ro.product.cpu.abi]: [armeabi-v7a]
    [ro.product.device]: [apollo-tvbox]
    [ro.product.firmware]: [2.1.4]
    [ro.product.locale.language]: [cs]
    [ro.product.locale.region]: [CZ]
    [ro.product.manufacturer]: [unknown]
    [ro.product.model]: [tvbox]
    [ro.product.name]: [apollo_tvbox]
    [ro.revision]: [0]
    [ro.runtime.firstboot]: [1357285145932]
    [ro.secure]: [0]
    [ro.serial.touch]: [1]
    [ro.serialno]: []
    [ro.setupwizard.mode]: [OPTIONAL]
    [ro.sf.lcd_density]: [160]
    [ro.softmouse.bottom.code]: [-1]
    [ro.softmouse.left.code]: [-1]
    [ro.softmouse.leftbtn.code]: [-1]
    [ro.softmouse.midbtn.code]: [-1]
    [ro.softmouse.right.code]: [-1]
    [ro.softmouse.rightbtn.code]: [-1]
    [ro.softmouse.top.code]: [-1]
    [ro.udisk.lable]: [tvbox]
    [ro.wifi.channels]: []
    [rw.bluetooth.status]: [0]
    [sys.boot_completed]: [1]
    [sys.settings_secure_version]: [1]
    [sys.usb.config]: [mass_storage,adb]
    [sys.usb.state]: [mass_storage,adb]
    [system_init.startsurfaceflinger]: [0]
    [wifi.interface]: [wlan0]
    [wifi.supplicant_scan_interval]: [15]
    [wlan.driver.status]: [ok]
    View
    1
    S
    serg090909
    rom android 4.0

    serg090909 said:
    http://xdaforums.com/attachment.php?attachmentid=1692264&stc=1&d=1359646086
    http://xdaforums.com/attachment.php?attachmentid=1692265&stc=1&d=1359646086
    http://xdaforums.com/attachment.php?attachmentid=1692266&stc=1&d=1359646086
    http://xdaforums.com/attachment.php?attachmentid=1692267&stc=1&d=1359646086
    Click to expand...
    Click to collapse

    прошивку устанавливать через livesuite 1.07.
    мой email ustinov.81@mail.ru: Ковбой:
    https://www.dropbox.com/s/v2eiwmq3j9zhn54/sun4i_crane_3g_yho_car_778.img
    еше одну залью через час.
    View
    1
    S
    serg090909
    zschendh said:
    Can you let me have some more Details to that device, i want to purch. it and use it in a SEAT Exeo (Audi A4 base) but need to know some more Details. Thx in advance
    Click to expand...
    Click to collapse

    вот прошивка с работающим bluetooth usb
    https://www.dropbox.com/s/vulmnze1tm0jqlb/serg98@spb-bluetooth.img

    ---------- Post added at 12:21 PM ---------- Previous post was at 12:11 PM ----------
    ariandr said:
    you could just use this cwm to update, or use the built in one, which is almost on every china manufactured car audio system.
    Mine worked with the stock recovery after using adb bundle:
    Code: 
    adb reboot recovery
    i also tried script from the link above through the terminal emulator:
    Code: 
    sh reboot-recovery.sh
    or simply in "terminal emulator" apk use:
    Code: 
    echo -en "boot-recovery\0" > /dev/block/nandf; sync; reboot

    use usb-otg in your "knight rider" or analog to plug an ordinary usb keyboard before reboot to cwm recovery, it'll work - arrows and enter keys - simple as it can be. The keyboard should be plugged in before reboot in order to android "catch" it on boot.
    One problem - display will likely be shifted on cwm 6 for a10 (link above) as i had - almost on 7% to the left - you just need to guess menu items or use another android device to check them. And if trying to switch between wince and android part to fix it brought me to even more buggy view - half white flickering display. It probably should be fixed by script.bin copy from builtin cwm, but i had not tried yet.

    Suppose, in case of faulty firmware u can burn in new firmware by standart livesuit and try the builtin recovery to restore your extsd (simple sdcard, not nandk partition) cwm-image backup.

    I had one unresolved bug: If enabling "google's location service" and "location and google search" in "location" menu - system hangs and reboots. Same when i enable it, reboot quickly (saving preferences before crash) and use any of gps applications (navigation, maps, and so on). Any ideas how to fix it?

    The post from serg090909 can be translated in google translate from russian. He managed to burn in system image twrp touch recovery and support for bluetooth devices.
    У меня только один вопрос, Серёга, ты twrp собирал сам или взял где готовый? ткни пальцем в ссылку, плз.
    Click to expand...
    Click to collapse
    я пересобирал twrp))
    View
    1
    S
    serg090909
    мне удалось перенести андроид на SDCARD. теперь андроид запускается с карты памяти а не с NAND.
    вот ссылка на образ android_sd_8g.img образ нужно записать на microSD не менее 8G. програмой Win32DiskImager.exe.
    после записи android на карту microSD вставить в слот gps/navi.
    вот небольшое видео как работает ANDROID_SD_8G с microSD 8G http://yadi.sk/d/icXH-c7vCefCU
    вот сам образ ANDROID_SD 8G http://yadi.sk/d/4Z6SjGjqC5Suq
    ИНСТРУКЦИЯ ПО УСТАНОВКЕ.
    1.установите программу Win32DiskImager.exe
    2.запустите Win32DiskImager.exe и выберите букву диска вашей microSD (microSD должна быть не менее 8 гигабайт!!!!!)
    3.выберите образ android_sd_8g.img
    4.нажмите внизу программы (Write)
    5.дождитесь записи образа на катру microSD.
    6.вставить карту в слот gps или navi. включить магнитолу.:laugh:
    View
    1
    D
    drogert
    jamesuhl said:
    I'm looking at buying the CVVE-C180-2GEN - Road Veles 2. Does anyone know if Android can control USB devices running through the Road Veles 2 rear USB port? I don't need BT support, as the device I want to include is an OBD2 USB cable that will use Torque to view on-board data from my PCM.
    Click to expand...
    Click to collapse

    Hi jamesuhl.

    I am running USB devices thru the rear USB-port. My radio now has a USB-HUB with a wifi dongle and a bluetooth dongle. I also connected a keyboard but then it went buggy. I think the radio doesn't have enough USB-power to control more then 3 items or so. I think I am going to make a external power supply to my USB-hub. I think that will solve the problem. The only thing is I am a bit of a Android noob but with the help of some very nice people I was able to mod my radio to the extent I wanted. So my guess is that the drivers for the USB to OSB2 plug you want to buy arent loaded into the firmware... Furthermore, I've checked torque free AND torque pro and both only connect to wifi and/or bluetooth.

    But with the help of Serge090909 and his image I now have a very nice radio with a better android version then ever before. My next challenge is going to be to hook up a PS3 bluetooth controller to play some racing games, or GTA for that matter :laugh::victory: I can see the police pull me over and ask me why I have a controller in my hand... gnagnagna

    serg090909 said:
    чтобы расширить раздел с 8g до 32g. вот инструкция в фото. и программа MiniTool Partition Wizard Professional Edition
    http://yadi.sk/d/dSYPYtKZCq4At
    gps test удалите с папки system/app и клавиатуру Smart keyboard тоже удалите в system/app. потом поставте свою клавиатуру например с play market
    Click to expand...
    Click to collapse

    Serge090909,

    It has worked again! I have made the partition bigger and it now has the full 32GB. Thanks! I first wanted to download the english version of minitool because I actually dont speak russian. I am dutch and with the help of google translate I figured out what to do with your instructions. That didn't work so I've used your russian version and thanks to the pictures you send with the download I was able to fix the SD-card. :laugh:

    I will delete the apps that do not work when I can get back into my car. I am now babysitting my little boy because my girlfriend is off to work.

    Serge090909,

    Он работал снова! Я сделал раздел большего размера и теперь она имеет полное 32GB. Спасибо! Я сначала хотел скачать английская версия MiniTool, потому что я на самом деле не говорит на русском языке. Я голландский и с помощью Google Translate, я понял, что делать с вашим указаниям. Это не сработало, так что я использовал вашу версию и России благодаря изображениям вы посылаете с загрузкой я смог исправить SD-карту. :laugh:

    Я буду удалять приложения, которые не работают, когда я могу вернуться в свою машину. Я теперь няня моего маленького мальчика, потому что моя подруга на работу.
    View

New posts