[Q] AT&T vs Bell hardware

[TheScream]

I ordered via AmazonWireless's "Replacement Phone" option to get one to Australia and received is about 1.5 months ago and its been okay so far.

I'm on Telstra (Australia) which primarily uses 850MHz (UMTS/WCDMA/HSPA/HSPA+).

As there has been leaked Telstra ROM, I'm wondering if there is actually anything different between the devices other than the ROM, and if so, if I can flash the SBF from the Telstra/Bell devices onto my Atrix without causing issues.

 

[IrshaadH]

I ordered via AmazonWireless's "Replacement Phone" option to get one to Australia and received is about 1.5 months ago and its been okay so far.

I'm on Telstra (Australia) which primarily uses 850MHz (UMTS/WCDMA/HSPA/HSPA+).

As there has been leaked Telstra ROM, I'm wondering if there is actually anything different between the devices other than the ROM, and if so, if I can flash the SBF from the Telstra/Bell devices onto my Atrix without causing issues.

After reading some of these threads it seems that the Telstra SBF is incompatible with the AT&T atrix. After my own experience with flashing this to the Bell Atrix, I've come to the conclusion that there seems to be an American version of the Atrix as well as an international version. This is because the Atrix can either be recognized as NS Olympus or SE Olympus through RSD Lite. Since my Atrix, as well as other who have successfully flashed theirs with the Telstra SBF have the SE version, it seems that this may be the only one compatible with the Australian firmware.

If you ordered your phone through Amazon, it is likely that you have the NS version. You can verify by downloading RSD Lite, plugging in your phone while in RSD mode and seeing what shows up on your computer.