[Q] Botched Gingerbread install

pr621

Senior Member
Oct 7, 2010
68
8
0
Lancaster
So, I went to install gingerbread on my captivate, ripped from the nexus s, but I accidentally flashed the wrong thing. now my phone turns on to the att logo, then it goes away, then about 20 seconds later it comes back. I have been looking for hours on how to get to download mode, and I think that somehow I crippled my chances of using the 3 button combo. I know how to use abd to get to download mode, and my computer shows that my phone is connected when I plug it in at the att logo, but, my PC thinks its a nexus s and it can't find drivers for it. I updated my SDK but it still wont find drivers. is there anyway to install nexus s drivers or to get my phone into download mode without a jig?
 

pr621

Senior Member
Oct 7, 2010
68
8
0
Lancaster
that didn't do anything. if it matters, my phone wont even get to the battery charging screen with the usb cable plugged in, the spinning circle thing comes up for about 2 seconds, goes away, then comes back but its frozen the whole time, nothing else happens. My PC still sees that its plugged in, but, like I said, it thinks its a nexus s, and wont install drivers :/

PS: as to exactly what happened, I forgot to do the voodoo lagfix before trying to install the gingerbread dump from the nexus s, so I got into download mode and went back to 2.1. it was right after that when I realized that my three button combo wasnt working, so I was going to fix that by updating the bootloader, but accidentally loaded nsongs.tar instead of the tar that would fix my download mode combo, so in Odin, I had phone bootloader update checked when I flashed that
 
Last edited:

bames

Senior Member
Oct 24, 2010
989
83
0
Just take the battery out and plug in usb cable while holding volume up and down. (I had the same problem until someone suggested this)
i had a successful install.....but my problem came when trying to revert to stock.

PC wouldn't recognize device and for the first time ever i couldn't get into download mode using method above or a 3 button method that worked for me (a slight variation to method stated above).

Finally the following worked:

1. open odin 1-click JF6
2. remove battery (and any external sd) from phone
3. plug phone into pc via USB (without battery in phone)
4. Hold Vol + / - toggle down simultaneously.
5. While holding the buttons down insert the battery. When i did this my phone entered DL mode almost immediately and i was able to use odin to get back to stock.

build 1007
 

avgjoegeek

Senior Member
Sep 17, 2010
1,316
101
0
Junction City
I'd try the above method to get into DL mode.. if that doesn't work you can try the JIG and see if that works.

But a requirement before flashing was to verify that your buttons worked on your phone.
 

pr621

Senior Member
Oct 7, 2010
68
8
0
Lancaster
the buttons were working, but I didn't have a lagfix installed. I flashed back to stock and noticed that my buttons weren't working after that. I went to fix them but flashed nsongs.tar by accident, and I had the "phone bootloader update" box checked, so I'm thinking thats why my buttons aren't working now. I've tried that method above a couple times and nothings happened...
 
Last edited:

avgjoegeek

Senior Member
Sep 17, 2010
1,316
101
0
Junction City
Hmm.. you can try and update using the Nexus S USB drivers.. if they are different from ours that is .. go to that forum and poke around to look for them.

At this point.. can't hurt trying anything.
 

pr621

Senior Member
Oct 7, 2010
68
8
0
Lancaster
Where would I find the nexus s drivers? I installed the samsung mobile phone drivers, but my computer still says "found new hardware - nexus s" anytime I plug in, and it shows up in device manager with a big yellow question mark.
 

bames

Senior Member
Oct 24, 2010
989
83
0
I'd try the above method to get into DL mode.. if that doesn't work you can try the JIG and see if that works.

But a requirement before flashing was to verify that your buttons worked on your phone.
same as the poster

when i did my install my buttons were working as well....i have the 1007 build and never had any problem getting to recovery or dl using 2-button and 3-button combo's.

After the gingerbread flash was a different story though. Luckily for me the method i posted almost like jumpstarted me into DL mode....when i did that it went into DL faster than it ever had with the normal methods....the DL screen popped up almost the instant the battery connectors hit.
 

pr621

Senior Member
Oct 7, 2010
68
8
0
Lancaster
yea, none of the methods I've found have gotten me into download mode. Is there anyway to get the nexus s drivers so I can do this through adb? I don't have a car so getting to radioshack to buy resistors is kinda hard :/
 

pr621

Senior Member
Oct 7, 2010
68
8
0
Lancaster
ok, so I updated my sdk again and it now I have the drivers installed, I can use adb now, but whenever I do, adb reboot download, it reboots, but not to download mode, i goes right back to the boot loop. I was wondering if there was anyway to push a new bootloader onto my cappy using adb. that would be awesome