[Q] Bricked, I cannot flash my TS

[luisgsaiz]

Good morning everybody,

Yesterday I was trying to root my TS using the TrueSmart_Root_Tool_1.2.1 when I applied the root, recovery and patch my omate got stuck in Omates logo, after that I decided to flash it to the official firmware using SP flash tool, and following the guide [GUIDE] How to "UnBrick/Return to Stock" your Omate TrueSmart Watch x201, I clicked download and I got the error Enable DRAM failed (4032) so I selected firmware upgrade and managed to download the official firmware, after that my omate wont start. So I tried to flash it again, in order to find the right version for it. I tried in two different computers and in both have the same problem Enable DRAM failed (4032). Could you please help me to solve this DRAM problem? Any Ideas?

My omate is EU 2100 version and its official firmware was from may 2014.

 

[kuronosan]

Good morning everybody,

Yesterday I was trying to root my TS using the TrueSmart_Root_Tool_1.2.1 when I applied the root, recovery and patch my omate got stuck in Omates logo, after that I decided to flash it to the official firmware using SP flash tool, and following the guide [GUIDE] How to "UnBrick/Return to Stock" your Omate TrueSmart Watch x201, I clicked download and I got the error Enable DRAM failed (4032) so I selected firmware upgrade and managed to download the official firmware, after that my omate wont start. So I tried to flash it again, in order to find the right version for it. I tried in two different computers and in both have the same problem Enable DRAM failed (4032). Could you please help me to solve this DRAM problem? Any Ideas?

My omate is EU 2100 version and its official firmware was from may 2014.

Use this, and use the EMMC scatter.

 

[palstyo]

Hi I have exactly same error message.
My TS is new one.
After flash with 20140328 firmware become like this coz. my ts was stack while booting when I try to rooted.
Any idea to resolve this problem.
Pls some one help.

 

[kuronosan]

Need more info about your unit.

 

[palstyo]

Thank you for your reply.
my TS is 1/8/2100, firmware 20140513(when it's arrived)
Aluminum Version

 

[kuronosan]

Use this:

https://docs.google.com/file/d/0Bz7sBdJpIWEgbVhHczYtTkhVbG8/edit?usp=docslist_api

---------- Post added at 10:10 AM ---------- Previous post was at 10:10 AM ----------

And don't flash older firmware. I have firmware and tools in the development forum.

 

[palstyo]

Thanks a lot I'll try with this

 

[palstyo]

Hi

I try it but seems zip file is corrupted.
I can't extract any tools.
Seems system.img has crc error.
Would you kindly pls resend it to me?

 

[kuronosan]

I didn't send it. I'll get you another link.

 

[palstyo]

Thanks again
Yes please!!!
Coz. you are the last hope.

 

[kuronosan]

Give this a go:

https://docs.google.com/file/d/0Bz7sBdJpIWEgbkNpbzFqdnpQODA/edit?usp=docslist_api

Make sure you use the emmc scatter.

 

[palstyo]

Thank you for your quick reply.
Yes you means use emmc scatter in this zip right?

 

[kuronosan]

It should be in there, yes.

 

[palstyo]

Hi

I got different message when I use this.
pls advice

 

[kuronosan]

Which scatter file did you select? I need the full file name.

 

[palstyo]

I use this MT6572_Android_scatter_emmc.txt
Which is contained within zip file

 

[kuronosan]

Okay, we need to start over. You said you have an EU unit that had the 2100 firmware, right? Make sure you've selected format + download.

 

[palstyo]

Yes exactly I have 1GB 8GB 2100MHz unit
I just select download so means should I select format all+download?
am I correct?

 

[kuronosan]

The PMT error happens when you flashed the wrong partition layout.

Select the emmc file, flash only the preloader. Let's avoid formatting for now.

 

[palstyo]

I didn't send it. I'll get you another link.

The PMT error happens when you flashed the wrong partition layout.

Select the emmc file, flash only the preloader. Let's avoid formatting for now.

Great it's done.:good:
Thanks a lot seems progress.
So what is the next step?
Pls advice.