[Q] Bricked my Epic while trying to install Clockwork...

[metalblaster]

had my epic rooted for a while then went to install clockwork with the "all-in-one" epic.aio.v1.13 file. It successfully installed Clockwork but I couldnt not boot into clockwork. So in the vain effort to try and keep the files i have i tryed flashing the SPH-D700 kernal, bare-min and odin hung, Now im trying to get the full factory reset files to flash with odin. are their any other ways to do this other than going all the way back to SPH-D700-DG27-8GB file? BTW when i start now the phone comes up with a phone dash dash yellow ! dash dash Icon. Im guessing I completely trashed this thing. Some one help me?

 

[MysteryEmotionz]

had my epic rooted for a while then went to install clockwork with the "all-in-one" epic.aio.v1.13 file. It successfully installed Clockwork but I couldnt not boot into clockwork. So in the vain effort to try and keep the files i have i tryed flashing the SPH-D700 kernal, bare-min and odin hung, Now im trying to get the full factory reset files to flash with odin. are their any other ways to do this other than going all the way back to SPH-D700-DG27-8GB file? BTW when i start now the phone comes up with a phone dash dash yellow ! dash dash Icon. Im guessing I completely trashed this thing. Some one help me?

You can still get into download mode. There us a d18 tar floating around. Flash that the odin

Sent from my SPH-D700 using XDA App

 

[UnicronAlpha99]

If it powers on then you still have hope. Hold qwerty 1 and the power button to boot into download mode and use this thread to flash back to stock. http://forum.xda-developers.com/showthread.php?t=773032

Epic 4g/Rooted/Epic Experience 1.2.02/Phoenix 1.45/Androdena-Galassia Theme

 

[265ada]

No problem just do this

had my epic rooted for a while then went to install clockwork with the "all-in-one" epic.aio.v1.13 file. It successfully installed Clockwork but I couldnt not boot into clockwork. So in the vain effort to try and keep the files i have i tryed flashing the SPH-D700 kernal, bare-min and odin hung, Now im trying to get the full factory reset files to flash with odin. are their any other ways to do this other than going all the way back to SPH-D700-DG27-8GB file? BTW when i start now the phone comes up with a phone dash dash yellow ! dash dash Icon. Im guessing I completely trashed this thing. Some one help me?

I have had your same problem my friend just hold 1 while pressing power on and get in download mode then just do odin again
This nice yellow arrow has happened to me bunches of times so don't worry!

 

[DRockstar]

When you get the dash yellow icon situation, the only way to recover is to flash back to factory with Odin3.

In case you haven't gotten it yet, here's the download link for the di18 stock tar:

http://www.multiupload.com/X9AB1U56JV

You can get back into download mode by doing the following:

* Close the Odin program
* Pull the USB cable and battery out of the phone
* While pressing both the 1 key and power button with one hand, replace the battery with the other. Download mode should immediately appear.
* Open Odin first, then reconnect the USB cable
* Load the di18 stock tar into PDA, reboot should be the only thing ckecked. Press start.

I wrote the all in one script, and would like to know what happened when you installed the clockwork mod. Tell me what OS you were using and what messages came up. The script should have detected if the install wasn't successful.

Sent from my SPH-D700 using Tapatalk

 

[metalblaster]

thanks for the help

Being the resilient person that I am, (as well as the impatient one). I found a stock Tar for DG26 and Flashed it to my phone using odin... it fixed it. Then i manually updated it... Had i waited for a response i would have known there was a .tar file with the DI18 update floating about... Thanks for the help though. This is a good forum with a good community.

 

[DRockstar]

Being the resilient person that I am, (as well as the impatient one). I found a stock Tar for DG26 and Flashed it to my phone using odin... it fixed it. Then i manually updated it... Had i waited for a response i would have known there was a .tar file with the DI18 update floating about... Thanks for the help though. This is a good forum with a good community.

At least quite a few people came to your aid... glad you've gotten it sorted. Feel free to post again in the all in one if you still want to install clockwork mod, I do my best to help as long as I'm online. You know what to do now in case something doesn't work out... It's happened to us all.

 

[metalblaster]

Interesting enough, I don't think I actually bricked the phone when I first installed Clockwork. Seeing as this is my first smartphone and my first foray into the Android universe, I am a bit of a noob when it comes to how things are done. Not realizing that clockwork Mod used a different button to engage items than the normal Samsung recovery platform, I had thought I had some how overridden the start up files to eclair with the All in one program.. After re-upgrading the phone back to DI18, I rooted then installed clock work again using the "AIO" program. (great program BTW). I encountered a similar error to what I had before, When I was in clockwork I was unable to leave by using the home button or even removing the battery, but I hit the back button and then figured out that the camera button acted like the home button would in the native Samsung recovery client. I think this was the case from the start. Just keep this as a story of warning if you ever are in my position, ask people before you think you've completely "bricked" or screwed something up, because there may be a simple solution. Anyways thanks for the help, I'm still learning all of this, though I've been using linux platforms for years (no ubuntu or mint, more Red hat and Debian.) so you'd think id be ok at it....