[Q] CM9 Install

[sactownsav]

So Ive been using EOS for a while, but was ready to hop onto the CM9 train as it was looking stable enough from what I had been reading.....
So I boot into recovery, wipe date, cache, and dalvik, and proceed to flash the latest CM9 cm-9-20120521-NIGHTLY-stingray (ive tried 3 different builds) ....

Everything goes fine. Flash Gapss and reboot. All good. Let it sit for 10 minutes, then connect to wifi and set up my google account. As soon as thats done I reboot.....and thats the end of it. It will boot loop every time. But ONLY on second boot. Ive tried changing recoveries...same result..... GO back, flash latest EOS, and everything is working fine...

Am I missing something because this is driving me crazy??

Thanks.

 

[daley stephenson]

try this - after clearing caches and wiping data - install cm9 as normal - once this is done run the fix permissions option inside cwm and reboot

let us know if this worked - good luck

 

[sactownsav]

try this - after clearing caches and wiping data - install cm9 as normal - once this is done run the fix permissions option inside cwm and reboot

let us know if this worked - good luck

OK im gonna try this. Thanks


Ive used rogue and EOX rcovery and same result, should I try CWM or does it matter?

 

[daley stephenson]

OK im gonna try this. Thanks


Ive used rogue and EOX rcovery and same result, should I try CWM or does it matter?

i recommend using the latest rogue recovery found here http://goo.gl/OW1k4 - good luck