[Q] Digitizer

[Sf3d0]

Hello,
I have cracked my Xperia SP digitizer and I'm currently searching for a replacement. I found many, although the thing is that there are some that have the logo costing about 20 to 30 EU and some without the logo costing under €10. Is there any difference between them? I really do not care about the logo, the only thing that concernes me is the quality, meaning sensitivity, accuracy and durability. Are the OEMs worth their money or is it the same quality on both? Can I post the links from the sites I found them, so you can check? Thanks a priori!

 

[smogf]

I changed once to nobname digitizer. After 5 minutes I bought used original one. Cheaper and much better quality. So I suggest to search for used one in good condition.
These with logo can be also not original sony digitizer.
Ive found original one in sony store (live in PL) It cost about 50eur.

 

[h4xw4r]

did you buy the digitizer ? if yes can you please tell me where did you buy it ?
I accidently cut the digitizer's cable/link, i think i have to buy the whole thing for that

 

[Iekuta]

For who want to know, i ordered digitizer for 4,5$ from Aliexpress. I applied that and everything's working fine and acceptable for 4$ money. I only have some responsiveness a little [not so much] . Rarely the touch speed is slowing down for 1-2 minutes, but it comes back then. And the light sensor isn't working for me ( it's not problem for me)

 

[iirisa]

I ordered a digitizer from Amazon, no issues whatsoever. But I think it was originally from China, because it was very cheap. Judging from my experience, a digitizer from eBay, Aliexpress might do the job just fine.

 

[h4xw4r]

Thanks for replying i got an original but used digitizer in some mobile shop for about 8$ and it works pretty fine

 

[Iekuta]

I bought a new black digitizer, and all is working fine.
The white one's sensors wasnt worked but black's works fine.

 

[TechnoSparks]

I bought a new black digitizer, and all is working fine.
The white one's sensors wasnt worked but black's works fine.

What do you specifically mean??

 

[Iekuta]

What do you specifically mean??

I just said that my white colored digitizer's sensors were not working. But the black colored one works just fine.

 

[TechnoSparks]

I just said that my white colored digitizer's sensors were not working. But the black colored one works just fine.

Oh okay

 

[h4xw4r]

I bought a new black digitizer, and all is working fine.
The white one's sensors wasnt worked but black's works fine.

i have a white one what should i do ?? phones screen goes off whenever i make a call

 

[Iekuta]

i have a white one what should i do ?? phones screen goes off whenever i make a call

No fix The only solution is changing digitizer again. :crying:

 

[h4xw4r]

No fix The only solution is changing digitizer again. :crying:

is it related to the holes of the sensors what is the difference between black and white ? ( already have a new black one but its doesn't work)

 

[Iekuta]

is it related to the holes of the sensors what is the difference between black and white ? ( already have a new black one but its doesn't work)

I don't think either that it's a color-based problem. I think it's digitizers problem because some digitizers chip's are different.Maybe their sensors also different.

---------- Post added at 02:44 AM ---------- Previous post was at 02:41 AM ----------

guys could you give me a link to a digitizer you bought which works on CM13-CM14 custom roms.

I bought 2 digitizers and 2 of them are only working on Jellybean. Not working on 4.1.2 + roms ...

 

[h4xw4r]

I don't think either that it's a color-based problem. I think it's digitizers problem because some digitizers chip's are different.Maybe their sensors also different.

---------- Post added at 02:44 AM ---------- Previous post was at 02:41 AM ----------

guys could you give me a link to a digitizer you bought which works on CM13-CM14 custom roms.

I bought 2 digitizers and 2 of them are only working on Jellybean. Not working on 4.1.2 + roms ...

sorry bro i got mine from a scraped phone the one i bought didnt work at all but make sure that u buy one specific for your phone model mine was c5303 and u might want to try different frimware if u bought it from china try a chinese frimware or something