[Q] Failing Modum/Ril/Radio CM10.1?

[Factionwars]

hello,

I get the following errors after i compiled my own CM10.1 (their own nightly is working but when i built it myself it doesn't)

E/RILClient( 1903): Connect_RILD: Connecting failed. Connection refused(111)

And after some time it loops this:
D/RIL ( 3462): modem status [ 0x0 ]
E/RIL ( 3462): Modem boot timeout
D/RIL ( 3462): wait Modem boot ready

Full radio log: http://pastebin.com/6BGYGd5p

Thanks in advance.

PS: i differed my builded version to the official nightly and i am not missing any files.

 

[rusty88]

hello,

I get the following errors after i compiled my own CM10.1 (their own nightly is working but when i built it myself it doesn't)

E/RILClient( 1903): Connect_RILD: Connecting failed. Connection refused(111)

And after some time it loops this:
D/RIL ( 3462): modem status [ 0x0 ]
E/RIL ( 3462): Modem boot timeout
D/RIL ( 3462): wait Modem boot ready

Full radio log: http://pastebin.com/6BGYGd5p

Thanks in advance.

PS: i differed my builded version to the official nightly and i am not missing any files.

hey, I'm having the same issue now, did you ever find out what went wrong?

Thanks in advance

 

[Factionwars]

hey, I'm having the same issue now, did you ever find out what went wrong?

Thanks in advance

Yessir! The proprietary blobs which yo extract from your phone are not correct. Use these instead https://github.com/TheMuppets/proprietary_vendor_samsung

 

[rusty88]

Yessir! The proprietary blobs which yo extract from your phone are not correct. Use these instead https://github.com/TheMuppets/proprietary_vendor_samsung

Wow many thanks will do and hope it works

---------- Post added at 08:14 PM ---------- Previous post was at 08:10 PM ----------

Yessir! The proprietary blobs which yo extract from your phone are not correct. Use these instead https://github.com/TheMuppets/proprietary_vendor_samsung

btw I'm building a CM10.1 (because i'm trying out sailfish os) I should use the branch for CM10.1 right? are those blobs correct ?

---------- Post added at 08:29 PM ---------- Previous post was at 08:14 PM ----------

well just checked and the libsec-ril that I have matches the one in github (same md5sum) :\ any other ideas ?

 

[Factionwars]

Wow many thanks will do and hope it works

---------- Post added at 08:14 PM ---------- Previous post was at 08:10 PM ----------



btw I'm building a CM10.1 (because i'm trying out sailfish os) I should use the branch for CM10.1 right? are those blobs correct ?

---------- Post added at 08:29 PM ---------- Previous post was at 08:14 PM ----------

well just checked and the libsec-ril that I have matches the one in github (same md5sum) :\ any other ideas ?

Yes as far as my knowledge reaches it is only different on the android version.

 

[Factionwars]

Just try all the files in there and build. Also check if you efs files and partition is stil correct( the same as you used it in another install)

 

[rusty88]

Just try all the files in there and build. Also check if you efs files and partition is stil correct( the same as you used it in another install)

yup is working on cm11 and the original cm10.1 but when i flash sailfish it doesn't work...
anyway thanks though