[Q] Finally i bricked my HTC SENSATION !!!!

[d3vilskid]

Did he ever mention if he can boot into ROM? Since he was not able to flash anything ICS related through hboot is he able to downgrade to gingerbread through pg58?

Sent from my HTC Sensation using xda premium

 

[specter16]

what next ???

hi every one, i'm back again with some news

i passed my device through the JTAG

now the getvar commande gives me this

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.45.401.3
(bootloader) serialno: (deleted by me)
(bootloader) imei: (deleted by me)
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: low
(bootloader) battery-voltage: 3555mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.509s

so, is my phone is unbricked now ???

what should i do now ?

 

[ganeshp]

awesome everything is proper now.

now you first flash a 3.33 universal fimrware... then 4EXT recovery from the bootloader...then go to recovery...download whatever rom you want ...mount sdcard in recovery ..copy the rom to it from PC ... in Recovery go to wipe/format -> do format all partitions except sdcard ...and then flash the rom ..all will be good

My preference go for latest JB sense roms ..they are smooth as hell (revelation or vipers 3.1.0 )

njoy

 

[specter16]

awesome everything is proper now.

now you first flash a 3.33 universal fimrware... then 4EXT recovery from the bootloader...then go to recovery...download whatever rom you want ...mount sdcard in recovery ..copy the rom to it from PC ... in Recovery go to wipe/format -> do format all partitions except sdcard ...and then flash the rom ..all will be good

My preference go for latest JB sense roms ..they are smooth as hell (revelation or vipers 3.1.0 )

njoy

okay i'm waiting for the battery to charge

by the way, what about these 3 lines in the getvar cmd ???

(bootloader) version-baseband: N/A (bootloader) version-cpld: None (bootloader) version-microp: None

 

[ganeshp]

okay i'm waiting for the battery to charge

by the way, what about these 3 lines in the getvar cmd ???

(bootloader) version-baseband: N/A (bootloader) version-cpld: None (bootloader) version-microp: None

Ignore them.. Probably you got empty radio slot.. Flashing firmware should fix this

Sent from my HTC Sensation 4G using xda premium

 

[specter16]

Ignore them.. Probably you got empty radio slot.. Flashing firmware should fix this

Sent from my HTC Sensation 4G using xda premium

okay got it

i'll waite for the battery to charge then flash the firmware and see what it gives

thanx

 

[specter16]

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!

well, i tried to flash universal firmware and the resault was the same Failed-PU

i tried to flash an other hboot (unlocked) and Failed-PU

stock rom also failed to boot to RUU

i think that my device is still giving the same problems before i JTAGed it !!!!!

here are the differences that i noticed before and after the JTAG stage

------------------------------------------------------------
BEFORE JTAG

*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34

version-bootloader 1.29.0000
version-main 9.99.999.999
modelid: PG58*****
cidnum: 11111111
security: off
------------------------------------------------------------

AFTER JTAG

*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34

version-bootloader 1.27.0000
version-main 1.45.401.3
modelid: PG5813000
cidnum: HTC__032
security: off
------------------------------------------------------------

and i'm still having the same problem Fail-PU when i try to flash anything radio, hboot, rom, recovery... nothing pass

 

[d3vilskid]

Try a gingerbread ruu or phIMG

Sent from my HTC Sensation 4G using xda premium

 

[specter16]

Try a gingerbread ruu or phIMG

Sent from my HTC Sensation 4G using xda premium

not working

 

[d3vilskid]

Don't know what to say, it worked for someone in the evo3d section.

Sent from my HTC Sensation 4G using xda premium

 

[scottspa74]

well, i tried to flash universal firmware and the resault was the same Failed-PU

i tried to flash an other hboot (unlocked) and Failed-PU

stock rom also failed to boot to RUU

i think that my device is still giving the same problems before i JTAGed it !!!!!

here are the differences that i noticed before and after the JTAG stage

------------------------------------------------------------
BEFORE JTAG

*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34

version-bootloader 1.29.0000
version-main 9.99.999.999
modelid: PG58*****
cidnum: 11111111
security: off
------------------------------------------------------------

AFTER JTAG

*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34

version-bootloader 1.27.0000
version-main 1.45.401.3
modelid: PG5813000
cidnum: HTC__032
security: off
------------------------------------------------------------

and i'm still having the same problem Fail-PU when i try to flash anything radio, hboot, rom, recovery... nothing pass

So JTAG downgraded your hboot and removed supercid?

Sent from my EVO using xda premium

 

[ganeshp]

Can you boot into recovery?
Using this command
fastboot boot recovery.img

Edit: also it would have been much better if you have pumped the radio via jtag

What all partitions were jtagged?
Man the only hope is booting to recovery! If that's not possible then we still stuck at initial stages!

Sent from my HTC Sensation 4G using xda premium

 

[specter16]

Can you boot into recovery?
Using this command
fastboot boot recovery.img

Edit: also it would have been much better if you have pumped the radio via jtag

What all partitions were jtagged?
Man the only hope is booting to recovery! If that's not possible then we still stuck at initial stages!

Sent from my HTC Sensation 4G using xda premium

there is no recovery in my phone and i can't flash one because of Fail-PU

and about the JTAG stage, the person who made it for me, don't know what he did ( he's just a begginer and he don't know much better about android phones) by the way, he told me that nothing was changed, and you can see that the main version and cid was changed. i didn't pay any thing to him (be cause he told me that nothing changed) but if something happend and the phone worked, it would be 40euros

any way, now i'm still in hboot, i have no recovery, no RUU and i can't flash nothing.

dos that means that i have eMMC problem ???

 

[ganeshp]

there is no recovery in my phone and i can't flash one because of Fail-PU

and about the JTAG stage, the person who made it for me, don't know what he did ( he's just a begginer and he don't know much better about android phones) by the way, he told me that nothing was changed, and you can see that the main version and cid was changed. i didn't pay any thing to him (be cause he told me that nothing changed) but if something happend and the phone worked, it would be 40euros

any way, now i'm still in hboot, i have no recovery, no RUU and i can't flash nothing.

dos that means that i have eMMC problem ???

It's all because of corrupted radio.. That's for sure as your problem actually started by flashing a corrupted radio. And it's preventing any fastboot flash by Fail-PU errors. And now you are still stuck with the locked bootloader and that corrupted radio. As of now I have no solution unless you can boot into recovery! Try asking dexter in unbricking project thread

Sent from my HTC Sensation 4G using xda premium

 

[onemanshow85]

hi every one

i was trying to match the RIL/basebande versions

i tried to flash some radio files and i dont know what it happend (i really forget what i did exactlly)

sudenlly i pressed the hard reset in the hboot (yes i remember i did this)

after that i tried to reflash a radio file via fastboot

i notices that in my hboot it's writen like this

*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34

now when i try to flash PG58IMG (radio) it says fail-PU

i thaught that i'm still s-on because that pink LOCKED which written above (even it's written s-off under it !!!!!!!!)

okay i was able to change between hboot version by just flashing the hboot zip file and that's all so i tried to do that like i was

now when i try to flash the hboot (PG58IMG) it says alsi fail-PU

and now i'm stuck into this screen

here is my getvar resault if some one could help me

(bootloader) version: 0.5
(bootloader) version-bootloader: 1.29.0000
(bootloader) version-baseband: N/A
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 9.99.999.999
(bootloader) serialno: (removed by me because it's not important)
(bootloader) imei: (removed by me because it's not important)
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG58*****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3831mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 705f86f6
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.509s

http://forum.xda-developers.com/showthread.php?t=2351115

 

[ravike14]

try to unlock your bootloader now?? With a new unlock.bin if you succeed flash the jbear hboot and then try to flash recovery.img through fastboot

Sent from my HTC_Amaze_4G using xda premium

 

[AndresSanzH]

Try this...

well, i tried to flash universal firmware and the resault was the same Failed-PU

i tried to flash an other hboot (unlocked) and Failed-PU

stock rom also failed to boot to RUU

i think that my device is still giving the same problems before i JTAGed it !!!!!

here are the differences that i noticed before and after the JTAG stage

------------------------------------------------------------
BEFORE JTAG

*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34

version-bootloader 1.29.0000
version-main 9.99.999.999
modelid: PG58*****
cidnum: 11111111
security: off
------------------------------------------------------------

AFTER JTAG

*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34

version-bootloader 1.27.0000
version-main 1.45.401.3
modelid: PG5813000
cidnum: HTC__032
security: off
------------------------------------------------------------

and i'm still having the same problem Fail-PU when i try to flash anything radio, hboot, rom, recovery... nothing pass

I think you have to do SuperCID so you can flash universal FW!!!. Because your CID is HTC__032 (not compatible with universal). After SuperCID try to flash FW 3.33 univ. by following the steps on this post: http://forum.xda-developers.com/showthread.php?t=1459767
After that, flash a Recovery (4ext) by putting it on SD card and flash a ROM...

 

[AndroidSupporter318]

I think you have to do SuperCID so you can flash universal FW!!!. Because your CID is HTC__032 (not compatible with universal). After SuperCID try to flash FW 3.33 univ. by following the steps on this post: http://forum.xda-developers.com/showthread.php?t=1459767
After that, flash a Recovery (4ext) by putting it on SD card and flash a ROM...

You don't need to have superCID to flash 3.33 universal firmware. You can flash 3.33 if you are s-off.

BTW, OP already said that he gets fail-PU error when flashing anything. SuperCID will not help, nor will firmware 3.33 because he will get fail-PU. RUU will not work, as stated by OP.

the only thing I can think of is HTC unbricking project. I know it's technically not bricked, but in your case, since you can't flash anything, and you have no recovery, you can only hope for unbricking project by getting a QHSUSB_DLOAD from PC.

Sent from my Ouya

 

[AndresSanzH]

well, i tried to flash universal firmware and the resault was the same Failed-PU

i tried to flash an other hboot (unlocked) and Failed-PU

stock rom also failed to boot to RUU

i think that my device is still giving the same problems before i JTAGed it !!!!!

here are the differences that i noticed before and after the JTAG stage

------------------------------------------------------------
BEFORE JTAG

*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.29.0000
eMMC-boot
Mar 2 2012, 18:14:34

version-bootloader 1.29.0000
version-main 9.99.999.999
modelid: PG58*****
cidnum: 11111111
security: off
------------------------------------------------------------

AFTER JTAG

*** LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012, 17:33:34

version-bootloader 1.27.0000
version-main 1.45.401.3
modelid: PG5813000
cidnum: HTC__032
security: off
------------------------------------------------------------

and i'm still having the same problem Fail-PU when i try to flash anything radio, hboot, rom, recovery... nothing pass

You don't need to have superCID to flash 3.33 universal firmware. You can flash 3.33 if you are s-off.

BTW, OP already said that he gets fail-PU error when flashing anything. SuperCID will not help, nor will firmware 3.33 because he will get fail-PU. RUU will not work, as stated by OP.

the only thing I can think of is HTC unbricking project. I know it's technically not bricked, but in your case, since you can't flash anything, and you have no recovery, you can only hope for unbricking project by getting a QHSUSB_DLOAD from PC.

Sent from my Ouya

well, in the FW post it is said that you need Super CID to flash. This guys sais that he JTAGed his device and the CIDNUM changed from super CID to HTC__032 (wich i think is not compatible). i think he needs to SuperCID again and then try to Flash firmware or at least try to unlock the bootloader...

Unbricking project dont work for Soft bricked devices. Only works for devices wich cant boot into bootloader.

 

[AndroidSupporter318]

well, in the FW post it is said that you need Super CID to flash. This guys sais that he JTAGed his device and the CIDNUM changed from super CID to HTC__032 (wich i think is not compatible). i think he needs to SuperCID again and then try to Flash firmware or at least try to unlock the bootloader...

Unbricking project dont work for Soft bricked devices. Only works for devices wich cant boot into bootloader.

Problem is, he 1. Doesn't have a recovery and 2. Has fail-PU error on everything he flashes.

So, he can't flash anything. You can actually make your phone be in a qhsusb_dload state by using a paperclip to tweak something in the back cover of the phone.

The only requirement for HTC unbricking project is getting your phone into qhsusb_dload state.

Sent from my Ouya