[Q] Galaxy s3 mini SM-G730A Help Please?

[Snowwulfe]

Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...

Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though

have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

 

[assassinanex]

i have a odin recovery for recovery and boot just message me on aim: assassinanex or facebook: lane.wiscombe or yahoo: [email protected]] or [email][email protected]

 

[lgkahn]

Ok so i have a samsung galaxy s3 mini the model is sm-g730a it was running 4.2.2 and i was messing with an app called aniMOD and it asked me to reboot i did and it "soft bricked" my phone (i shut it off turn it on and it goes to the AT&T logo then freezes) i have tried multiple ways to fix it but it also has write protection enabled so i cant do anything with it can anyone help me please? if someone could tell me how to turn off write protection on the phone or how to unbrick it it would be greatly appreciated...

Oh And I Do Have Odin Mode And Recovery Mode that works on my phone that is all though

have also tried using odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery-clockwork-touch-6.0.2.7-golden.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

you are an idiot.. you brivjed your phone flashing a recovery that is not for this phone.. why don't people read before leaping.

Sent from my SGS 4

 

[tys0n]

@Snowwulfe Tried factory reset in recovery?

Sent through time and space from my s3mini/CM10.2

 

[[email protected]]

successful unbrick

I just unbricked my sm-g730a. you need a 2nd phone that is working, some downloads, and short 2 pins on motherboard.
Worked if your still interested...