[Q][HELP] Bricked?

[chiragmodi]

I was running the phone smoothly till yesterday night and then just thought of installing the lastest version of the CM9.0 (hephappy) I was running on bluepill. I then thought I had to update to TINYSTREAM for better performance. I went through a few forums and found out that it could be done without erasing the data or factory resetting. So i was just going through CWM 5.0.2.7 and by mistake i had pressed fix permission... And it started doing so. It took about ten min. ( I did not stop it as I had the fear of losing my phone). I then thought now I'm ready to Update my phone. I then downloaded all the required things(actually only the ROM). And then transferred it in to the memory card. I also had problems with recovery before. I could never directly boot into the recovery just by pressing the Vol Up + Power + Home, as mentioned in other threads. Thereby, I went in CWM and then rebooted through the option given there. And TADAAAAAA ... Phone got stuck in the LG logo.... This had already happened to me before so I did not panic cause i knew that i could recover my phone( I have gone through it once so had experience) I used the KDZ updater and the went to the emergency mode( That to my surprise worked) and started flashing the V20
And i got an error - The log read as:

12:43:04:379]  : =============================================
[12:43:04:379]  : Log is started on 08.07.2012, at 12:43:04:379, 
executable: C:\Users\Kunal Gaurav\Desktop\kdz\KDZ_FW_UPD.exe (ProcID: 0x00001510), 
compile time : Sep  8 2010 17:19:53
[12:43:04:379]  : Version : 
[12:43:04:382]  : strFilename1 = V20

[12:43:04:383]  : m_DlMode = 4, m_strBinaryPath = C:\ProgramData\LGMOBILEAX\Phone\DZ_GT540AT-00-V20c-IND-XX-DEC-03-2010.dz, m_nSelectedImages= 70787108

[12:43:42:053]  : Start Web Downloading
[12:43:42:053]  : Get Usb Port
[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM15)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM15)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM17)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM17)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM42)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM42)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM44)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM44)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM53)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM53)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM41)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM41)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM43)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM43)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM14)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM14)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM16)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM16)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM51)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM51)

[12:43:42:146]  : rsi.strFriendlyName=Standard Serial over Bluetooth link (COM50)

[12:43:42:146]  : Remove Standard Serial over Bluetooth link (COM50)

[12:43:42:146]  : rsi.strFriendlyName=Standard Modem over Bluetooth link #2

[12:43:42:146]  : Remove Standard Modem over Bluetooth link #2

[12:43:42:146]  : rsi.strFriendlyName=Nokia 2700 classic Bluetooth Modem

[12:43:42:146]  : Remove Nokia 2700 classic Bluetooth Modem

[12:43:42:146]  : rsi.strFriendlyName=Nokia 5130 XpressMusic Bluetooth Modem

[12:43:42:147]  : Remove Nokia 5130 XpressMusic Bluetooth Modem

[12:43:42:147]  : rsi.strFriendlyName=Nokia N8-00 Bluetooth Modem

[12:43:42:147]  : Remove Nokia N8-00 Bluetooth Modem

[12:43:42:147]  : rsi.strFriendlyName=Nokia C2-01 Bluetooth Modem

[12:43:42:147]  : Remove Nokia C2-01 Bluetooth Modem

[12:43:42:147]  : rsi.strFriendlyName=Standard Modem over Bluetooth link

[12:43:42:147]  : Remove Standard Modem over Bluetooth link

[12:43:42:147]  : rsi.strFriendlyName=LGE Bluetooth TransPort (COM46)

[12:43:42:147]  : Remove LGE Bluetooth TransPort (COM46)

[12:43:42:147]  : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM31)

[12:43:42:147]  : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port

[12:43:42:147]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM31
[12:43:42:147]  :    Port = COM31
[12:43:42:148]  : Clear
[12:43:42:148]  : Clear
[12:43:42:149]  : UNKNOWN : Req(12) -> Rsp(13)
[12:43:42:149]  : Clear
[12:43:42:150]  : UNKNOWN : Req(12) -> Rsp(13)
[12:43:42:150]  : Clear
[12:43:42:151]  : UNKNOWN : Req(12) -> Rsp(13)
[12:43:42:151]  : >> DIAG_STATUS_F FAILED
[12:43:42:156]  : >>Get Model Name [DIAG_VERNO_F]
[12:43:42:156]  : Clear
[12:43:42:157]  : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:157]  : Clear
[12:43:42:158]  : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:158]  : Clear
[12:43:42:159]  : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:159]  : Clear
[12:43:42:160]  : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:160]  : Clear
[12:43:42:161]  : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:161]  : Clear
[12:43:42:162]  : BAD CONN MODE : Req(0) -> Rsp(3)
[12:43:42:162]  :   FAIL (No Phone)
[12:43:42:162]  : GetModelName() Operation Failed Check Diag CMD
[12:43:42:162]  : EMERGENCY Booting Mode
[12:43:42:162]  : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[12:43:42:162]  : Clear
[12:43:42:162]  : Clear
[12:43:42:163]  :   BS/P500/7Derial over Bluetooth link (CO
[12:43:42:163]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[12:43:42:163]  : >>Get Mobile SW [DIAG_EXT_BUILD_ID_F]
[12:43:42:163]  : Clear
[12:43:42:163]  : Clear
[12:43:42:164]  :       DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[12:43:42:164]  : [ DLOAD ERROR ] : NAK_INVALID_CMD
[12:43:42:164]  : Clear
[12:43:42:165]  :       DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[12:43:42:165]  : [ DLOAD ERROR ] : NAK_INVALID_CMD
[12:43:42:165]  : Clear
[12:43:42:166]  :       DLOAD_NAK_F reason_msb = 6, reason_lsb = 6
[12:43:42:166]  : [ DLOAD ERROR ] : NAK_INVALID_CMD
[12:43:42:166]  :   FAIL
[12:43:42:166]  : Phone_Diag_Status = FALSE
[12:43:42:166]  : Clear
[12:43:42:166]  : Clear
[12:43:42:167]  :       DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[12:43:42:167]  : [ DLOAD ERROR ] : NAK_INVALID_LEN
[12:43:42:167]  : Clear
[12:43:42:168]  :       DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[12:43:42:168]  : [ DLOAD ERROR ] : NAK_INVALID_LEN
[12:43:42:168]  : Clear
[12:43:42:169]  :       DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[12:43:42:169]  : [ DLOAD ERROR ] : NAK_INVALID_LEN
[12:43:42:169]  :     NV Write Fail : NV ITEM 9028(9028)
[12:43:42:269]  : m_pPhoneCtrl->m_pDload->Dl_GetCommMode(&m_pPhoneCtrl->m_pDload->m_nCommMode)

[12:43:42:269]  : >> GET DLOAD COMM MODE
[12:43:42:269]  : Clear
[12:43:42:269]  : Clear
[12:43:42:270]  : [GetCommMode] Communication mode : 2
[12:43:42:270]  : Pre Nand Download
[12:43:42:270]  : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[12:43:42:270]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[12:43:42:270]  : Clear
[12:43:42:270]  : Clear
[12:43:42:271]  : [COM31] >>NandFlashInitWithFile(PARTITION TBL), BinType =8
[12:43:42:271]  : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = PARTITION TBL, BinType = 8
[12:43:42:271]  : NandFlashInitWithFile ::
[12:43:42:271]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[12:43:42:271]  : Clear
[12:43:42:271]  : Clear
[12:43:42:282]  : Clear
[12:43:42:282]  : Clear
[12:43:42:283]  : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[12:43:42:283]  : m_nSelectedImages= 70787108,Type= 3

[12:43:42:283]  : [COM14] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[12:43:42:283]  : [COM31] >>NandFlashInitWithFile(AMSS MODEM HEADER), BinType =14
[12:43:42:283]  : NandFlashInitWithFile :: LG3GBinaryList[BinType].szBinaryTypeName = AMSS MODEM HEADER, BinType = 14
[12:43:42:283]  : NandFlashInitWithFile ::
[12:43:42:285]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[12:43:42:285]  : Clear
[12:43:42:286]  : Clear
[12:43:42:297]  : >> AMSS FLASHING ...
[12:43:42:301]  : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[12:43:42:301]  : Sending Pkt Seq : 0
[12:43:42:301]  : Clear
[12:43:42:302]  : Sending Pkt Seq : 1
[12:43:42:302]  : Sending Pkt Seq : 2
[12:43:42:302]  : Sending Pkt Seq : 3
[12:43:42:302]  : Sending Pkt Seq : 4
[12:43:42:302]  : Sending Pkt Seq : 5
[12:43:42:302]  : Sending Pkt Seq : 6
[12:43:42:302]  : Sending Pkt Seq : 7
[12:43:42:303]  : Sending Pkt Seq : 8
[12:43:42:303]  : Sending Pkt Seq : 9
[12:43:42:303]  : Sending Pkt Seq : 10
[12:43:42:303]  : Sending Pkt Seq : 11
[12:43:42:303]  : Sending Pkt Seq : 12
[12:43:42:303]  : Sending Pkt Seq : 13
[12:43:42:303]  : Sending Pkt Seq : 14
[12:43:42:303]  : Sending Pkt Seq : 15
[12:43:42:303]  : Sending Pkt Seq : 16
[12:43:42:304]  : Sending Pkt Seq : 17
[12:43:42:304]  : Sending Pkt Seq : 18
[12:43:42:304]  : Sending Pkt Seq : 19
[12:43:42:304]  : Sending Pkt Seq : 20
[12:43:42:304]  : Sending Pkt Seq : 21
[12:43:42:304]  : Sending Pkt Seq : 22
[12:43:42:305]  : Sending Pkt Seq : 23
[12:43:42:305]  : Sending Pkt Seq : 24
[12:43:42:316]  : Dl_AsyncWrite - ErrNo(45), Addr(0x0000C000), NandErrNo(0x04)
[12:43:42:316]  : [COM14] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[12:43:42:316]  : Clear
[12:43:42:316]  : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[12:43:42:316]  : Close Port<<
[12:43:42:316]  : TYPE_WPARAM_UPGRADE_ERROR
[12:43:42:316]  : ¸Þ½ÃÁö º¸³¿ - TYPE_WPARAM_UPGRADE_ERROR Error Code = 4008
[12:43:42:382]  : Log finished

And then I thought that i should try in a different computer. So I Removed the battery and then put it back again. And the result:


My phone does not even switch on.

HELP HELP

PS: I've searched through... Found no solution. Please help me out! Anyone!

 

[vishurocks]

same happened with me. tell me what to do

 

[GobletSky31689]

Sorry bro but it looks like only lg service center can help you
I too bricked my phone by taking battery out when stuck in emergency mode
I tried many things but nothing worked for me.
At last i went to lg service and they replaced its mainboard for around Rs.1400 as my phone was not under warranty.
If your phone is under warranty then they will do it for free.Just tell them you were on froyo and just trying to update to gb using lg pc suite.Don't mention rooting or kdz or any such thing.

Though you could still try following things(imo just false hope):
1.Charge the phone for a night and see if it boots up.
2.Remove the battery and try to connect your phone to pc while pressing combo for emergency mode(BACK+VOLUME UP+POWER). Try only BACK+VOLUME UP too. If your phone enters emergency mode, then you are in luck:good: Use lgmdp to flash this time.
3.There is a method using RIFF JTAG or something which basically involves buying an expensive tool,opening your phone, soldering some wires to it and then "resurrect" it.

 

[chiragmodi]

Sorry bro but it looks like only lg service center can help you
I too bricked my phone by taking battery out when stuck in emergency mode
I tried many things but nothing worked for me.
At last i went to lg service and they replaced its mainboard for around Rs.1400 as my phone was not under warranty.
If your phone is under warranty then they will do it for free.Just tell them you were on froyo and just trying to update to gb using lg pc suite.Don't mention rooting or kdz or any such thing.

Though you could still try following things(imo just false hope):
1.Charge the phone for a night and see if it boots up.
2.Remove the battery and try to connect your phone to pc while pressing combo for emergency mode(BACK+VOLUME UP+POWER). Try only BACK+VOLUME UP too. If your phone enters emergency mode, then you are in luck:good: Use lgmdp to flash this time.
3.There is a method using RIFF JTAG or something which basically involves buying an expensive tool,opening your phone, soldering some wires to it and then "resurrect" it.

when did you repair it and where do you stay?? btw, i never knew that the phone can also boot up without a battery. Did you guys know? Try following:
1. Remove battery
2. Connect phone to PC.

Check!

and i tried all you suggestions... But none worked. I guess the motherboard is gone
:crying:

 

[vlt96]

Lol you need to wipe in CWMin mounts and storages)
Data
Cache
System
Boot

Flash
Reboot happy

Sent from my LG-P500

 

[chiragmodi]

I just arrived from the service centre. I'm sorry but my LG-P500 is no more... They are asking me to replace the board. Telling that a new one would cost Rs 9000. @GobletSky31689 : Can you tell me where you stay? Which service centre did you approach for getting it repaired?

 

[GobletSky31689]

I just arrived from the service centre. I'm sorry but my LG-P500 is no more... They are asking me to replace the board. Telling that a new one would cost Rs 9000. @GobletSky31689 : Can you tell me where you stay? Which service centre did you approach for getting it repaired?

Check your PM.
Also are you sure you approached official LG??
I got their address from this no 1800 180 9999 (they gave me another no. for lgmobile and then they gave me service center's no.).
Also is that service center present in this page:
http://www.lgmobiles.com/autosys/ascdetails.php?state=Tnd

P.S.
Sorry, but your comment slightly confused me:

btw, i never knew that the phone can also boot up without a battery. Did you guys know? Try following:
1. Remove battery
2. Connect phone to PC.

Check!

Is your PC(or even the charger) is detecting the phone ??

 

[chiragmodi]

Check your PM.
Also are you sure you approached official LG??
I got their address from this no 1800 180 9999 (they gave me another no. for lgmobile and then they gave me service center's no.).
Also is that service center present in this page:
http://www.lgmobiles.com/autosys/ascdetails.php?state=Tnd

P.S.
Sorry, but your comment slightly confused me:

Is your PC(or even the charger) is detecting the phone ??

Yes... I went to an official service centre... I now have given it to an electronic market shop famous in repairing mobiles here in chennai. Argh... missing my LG... and answering to you P.S. message... no... my phone is not even detected...

 

[chiragmodi]

Argh! guys.. i have successfully bricked my phone... I miss it! Loved it... Regret it! I murdered it! But it taught me a LOT!

 

[raunakrajvanshi]

yOU CAN SELL pARTS LIKE THE BATTERY BOODY SCREEN

 

[metal_head]

LG optimus one dead

i have searced this site for forums with solutions for bricked lg optimus one
my phone does not enter in emergency mode nor does it factory reset
tried connecting it in wall charger and to pc using usb cable with and without the battery but charging screen does not show up
i am on new baseband version and flashed CWM 5.0.2.0 as it is more stable than the new baseband version
i successfully flashed CM 7.2.0 (stable) four days ago and i loved it
yesterday after making a call from my phone with low battery (2 %) it automatically switched off. i charged it upto 60 % and switched it on. it worked for an hour and after that it just won't respond. my phone is not under warranty

 

[rr0yy]

It's an hardware issue.. i guess!! Try charging it for 3.. 4 hours Using Charger even if it doesnt respond!!