Problem SOLVED! Android 5.1 stock ROM revived it! Thank you, Motorola and XDA!
Sorry, not sure if it's proper to repeat my cry here. But I'm having a quite similar situation to this post: [SOLVED]Bootloader bricked, recovered, but fail when running firmware
Mine is a XT1058 from CA Rogers. I unlocked the bootloader and played with Brazil stock roms, a CM11 snapshot rom, having no problems.
After I tried RETAIL-GB_GHOST_KLA20.16-2.16_cid7_CFC_1FF_v2.xml (4.4.2, i guess), things went wrong. No signal as I expected, but I screwed up with OTA 4.4.4 installed so I got the same stuck at Fastboot mode:
I've tried mflash and RSD with 4.4.4 stock roms, but none of them worked, and all failed to write into the phone at Step 2 <step operation="flash" partition="partition" filename="gpt.bin":
XT1058_RCI-CA_4.4.4_KXA21.12-L1.26_59_cid14_CFC_1FF
XT1052_RETAIL-GB_4.4.4_KXA21.12-L1.26_56_cid7_CFC_1FF
XT1052_RETAIL-EU_4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF
ATT_XT1058_4.4.4-KXA21.12-L1.26_CFC_1FF
Editing XML to skip the step with error didn't work. It failed to flash at every step. Any help will be appreciated!
Sorry, not sure if it's proper to repeat my cry here. But I'm having a quite similar situation to this post: [SOLVED]Bootloader bricked, recovered, but fail when running firmware
Mine is a XT1058 from CA Rogers. I unlocked the bootloader and played with Brazil stock roms, a CM11 snapshot rom, having no problems.
After I tried RETAIL-GB_GHOST_KLA20.16-2.16_cid7_CFC_1FF_v2.xml (4.4.2, i guess), things went wrong. No signal as I expected, but I screwed up with OTA 4.4.4 installed so I got the same stuck at Fastboot mode:
Code:
BL version: 30.B7
Device is LOCKED.
downgraded security version
update gpt_main version failded
Failed to hab check for gpt_backup: 0x35
CID Read Failure
Invalid CID Status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP Partition found
Fastboot Reason: Invalid CID
XT1058_RCI-CA_4.4.4_KXA21.12-L1.26_59_cid14_CFC_1FF
XT1052_RETAIL-GB_4.4.4_KXA21.12-L1.26_56_cid7_CFC_1FF
XT1052_RETAIL-EU_4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF
ATT_XT1058_4.4.4-KXA21.12-L1.26_CFC_1FF
Editing XML to skip the step with error didn't work. It failed to flash at every step. Any help will be appreciated!
Last edited: