[Q] How to recover Yureka from Qualcomm HS-USB QDLOADER 9008?

Search This thread

jalsamir

New member
May 23, 2014
4
0
Hi There,
I wonder if anyone can help to recover Yureka?
I was trying to update rom using fastboot rom on the phone and it has broken the phone.
I am now getting Qualcomm HS-USB QDLOADER 9008.
Can anyone please me to recover my phone?

Thanks in advance.

Samir
 

xx88

Member
Jul 19, 2014
5
0
if you can boot into the bootloader mode, do so.
to boot into the bootloader mode:
>switch off the phone
>press and hold the volume up button
>while pressing the volume up button, plug in the usb cable. (needless to say, the other end should be attached to your computer, and the required drivers should be installed)

prerequisites:
download the stock zip from here htt p:// builds.cyngn. c om/factory/tomato/cm-11.0-XNPH52O-tomato-signed-fastboot. zip
download the fastboot tools
make a *.bat file of the following code:
<code>
@ECHO off
echo Flashing kernel
fastboot -i 0x1ebf flash boot boot.img
echo Flashing system
fastboot -i 0x1ebf flash system system.img
echo Wiping Data
fastboot -i 0x1ebf flash userdata userdata.img
echo Flashing recovery
fastboot -i 0x1ebf flash recovery recovery.img
echo Flashing model
fastboot -i 0x1ebf flash modem NON-HLOS.bin
fastboot -i 0x1ebf flash rpm rpm.mbn
echo Flashing bootloader
fastboot -i 0x1ebf flash sbl1 sbl1.mbn
fastboot -i 0x1ebf flash tz tz.mbn
fastboot -i 0x1ebf flash aboot emmc_appsboot.mbn
echo Flashing complete. Disconnect device and reboot
</code>

extract both the zips in the same folder and run the bat file while your phone is plugged in in the bootloader mode.

cheers!
 

akki25rocks

Member
Mar 3, 2015
7
1
My Yu Yureka is Hard Bricked

My Yu Yureka is Hard Bricked .....can anyone help me to unbrick it
my phone is not start in Fastboot Mode and Normal Mode
In QPST it always shows download mode
please help me out
I want 8916_msm.mbn,MPRG8916.hex files