[Q]i777: Firmware upgrade encoutered as issue...

[Nghiem]

Hi All,

I was playing with this PARTITION i777. then stuck at step #7. After a few times to repeat steps 1-7 again in order to move to step #8, now my i777 is saying " Firmware upgrade encoutered as issue. Please select recovery mode in kies & try again." whenever I plug the USB cable in.

Tried Kies, it keeps saying "connecting..."

Tried to flash original one (I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5, as step 1) in ODIN 3.09, I got the "FAIL" I tried 3 times I got "FAIL" 3 times although I got many "SUCCESS" at the same PC & USB cable.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I777UCMD8_I777ATTMD8_I777UCMD8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> factoryfs.img
<ID:0/003> zImage
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Please give me some ideals how to get over this. Thanks.

 

[Nghiem]

SOLVED

The issue is resolved by flashing I777 UCKH7 PIT.