[Q]install Cm10 problem

[sandyfriend]

Hi, I just got my HD+ back ,
and wanted to put cm10 on it .
I follow the step

stuck at the last step .
I flash the cwm img to sdcard.
nd+ reboot with cwm but not Usb connection. win 7 64bit said it is invalid device, driver install is fail too.
so I turned to ubuntu . I browsered the developer thread
someone said in linux, only need is puting the cm zip to cm10sdcard partition for your sdcard.
I am not quite understand this part ?
in linux, I only saw one partition FAT 32 label : boot. size about 120Mb
the other is unallocated.

here is what i tryed.
1. create a sdcard parition :FAT 32 label sdcard
put sdcard back. the cwm said can not Mount sdcard.

2. since I can connect the hd+ to pc . I adb push the cm zip to sdcard on the devices.
but install zip for sdcard and internal memory still show can not Mount /sdcard and /emmc/

:crying: Can some one give me a hand ? thanks a lot
BTW, is it possible the problem of sd card my is sandisk 16gb class 4

[Update] it seem like my sdcard have problem. can not get cm10sdcard partition. so thanks.

 

[akramarshad]

install Cm10 problem

Use a larger(preferably 8 gb or larger) micro sd card.Follow instructions by Verygreen in original post.
When you burn image to the card ,it will creat 4 partitions,but you will see only first(boot) partition on Windows PC.
Now boot into Ubuntu,either from cd or installed on your pc.
Now insert the card into your pc.
Yowill be able to see all 4 partitions.
Transfer ROM zip file and G Apps zip to CM10 (last) partition.
Take out the card and isert into Nook HD and reboot into recovery(pressing power and N key when it is starting to power up.
Install zip files,ROM first then G Apps and reboot.
You have working CM10 on your card.
If you want to boot into B&N software pull the card out,withe card inserted it will always boot into CM10.