[Q] Issue flashing back to stock

[Raptorial]

Hi all!

I ran a version of Android (don't remember which).
Last HSPL I installed was with the HSPL 3

So what have I done so far:
1. Flash it to the SPL-2.08.000
2. Download image of NL Vodafone and general NL image
3. Extracted the RUU_signed.nbh
4. Renamed it to LEOIMG.NBH
5. Formatted 2GB (tried 8GB as well)
6. Put LEOIMG.NBH on it (only when not trying CustomRUU.exe)
7. Booted with volume down
8. It shows the color screen

What happens:

When using SD:
If I use the Vodafone NL image it shows a gray loading screen, nothing happens.
If I use an general NL image I get the color screen, one short black flash and the color screen again.

What happens using CustomRUU.exe:
If I use CostumRUU.exe it starts the HTC screen and stays at 0%.
Can't get it to connect to Windows Mobile Device Center either


I must be doing something wrong or in the wrong sequence, but I can't find out what is is.


Enybody any advice?
I need to flash it back, because my touchscreen stopped working.

Edit:
I tried hard resets, several SD cards, different USB ports

 

[samsamuel]

Use hspl2 instead and set 1.66.0000

2.08.0000 is not a stock spl for regular hd2, only tmous, and it causes problems flashing to lower versions.

What I'd do next...
Hspl2.exe
Set 1.66.0000
Flash the rom over USB from bootloader screen. Forget about no active sync, it isn't important.

 

[Raptorial]

Thanks, solved it in 2min what took me 5 days .

Sometimes it is hard to find the details of stock specs.

Thanks!

Sent from my HTC Sensation XE with Beats Audio Z715e using XDA App

 

[samsamuel]

hehe, simple once you know.