[Q] "No command." error while trying to access recovery?

TheParanoidPickaxe

New member
Mar 15, 2014
4
0
0
I have unlocked the bootloader on my Moto G.
I have also flashed ClockworkMod Touch sucsessfully, but it did not boot after the first reboot, even when I said yes to "Disabling the stock recovery reflashing".
Now, whenever I enter fastboot mode (POWER + VOLDOWN) and select RECOVERY, it comes up with "No command." and a picture of an android lying down, with its front open, with warning symbol. (See attached)
I have tried reflashing the recovery using fastboot, but the same problem happens.
Any help?
 

Attachments

Phenom2

Senior Member
Feb 28, 2010
283
18
0
Nope, not working. Nothing coming on the screen.

Get the same issue after flashing a recovery with fastboot...

how i fixed it :

Flashed another one (CWM swipe on the cm11 thread) through fastboot mode

once recovery flash is done, go in the recovery RIGHT NOW (volume down to scroll, volume up to select ; don't touch power button)

once in the recovery, flash supersu if it has to be done, then reboot



Worked for me
 

rogeriorp

Senior Member
Dec 11, 2013
541
146
0
That new step above is the thing to do: hold Vol Up for like 15 seconds and then just tap power. It should work, but kinda tricky to get the first times.
 

kliu888

Senior Member
Feb 20, 2013
132
24
38
I got the same "No Command" screen when I flashed TWRP recovery. Then I went back to bootloader mode and flashed it again. This time I noticed a "Mismatched partition size" error (it's probably there before but I didn't pay attention). Then I flashed CWM recovery & got the same mismatched partition size error. Then I flash TWRP again & again got the mismatched partition size error. At that point I searched xda forum & found someone said it's OK. That error message just means the new recovery size is different from the old one. So I tried going to recovery (vol down then vol up) and magically it worked!
 

serophia

Senior Member
Feb 8, 2013
330
97
0
California
That said, it has been unbricked.
Whenever I flash a recovery, I still get "No command.", Phenom.

Thanks
If your flashing CWM, flash it then select recovery and press volume up, if it ask for something choose yes, if it still shows no command press UP + POWER button if nothing happens just keep pressing up + power until it boots into recovery.
 

nexus_87

New member
Apr 26, 2014
1
0
0
That new step above is the thing to do: hold Vol Up for like 15 seconds and then just tap power. It should work, but kinda tricky to get the first times.
What is this supposed to do? It gives me some commands but doesn't look like clockworkmod recovery. I think it is default android recovery but I thought cwm was supposed to replace that?

When I first flashed CWM and booted into recovery it worked fine. Then I chose 'Reboot Now' and selected 'Disable system recovery' and 'Enable root'. However now when I reboot into recovery CWM doesn't work and I can't tell if I have root.
 

rogeriorp

Senior Member
Dec 11, 2013
541
146
0
What is this supposed to do? It gives me some commands but doesn't look like clockworkmod recovery. I think it is default android recovery but I thought cwm was supposed to replace that?

When I first flashed CWM and booted into recovery it worked fine. Then I chose 'Reboot Now' and selected 'Disable system recovery' and 'Enable root'. However now when I reboot into recovery CWM doesn't work and I can't tell if I have root.
That's for the stock recovery indeed, try reflashing CWM.
 

remo0073

Senior Member
May 28, 2014
507
186
0
ITALY
Hey there I ran in to the same issue as you... How did you "Erase recovery from fastboot"?
Code:
fastboot erase recovery
to erase the stock recovery

then

Code:
fastboot flash recovery recoveryname.img
to flash a custom recovery, where recoveryname is the name of the file of your custom recovery

If it doesn't work try flashing twice
 

Thugness

Member
Jun 29, 2014
6
1
0
1506

Code:
fastboot erase recovery
to erase the stock recovery

then

Code:
fastboot flash recovery recoveryname.img
to flash a custom recovery, where recoveryname is the name of the file of your custom recovery

If it doesn't work try flashing twice

I'm assuming you mean to do this through CMD prompt? when I try to put that in it just says < waiting for device > and it sits there. (regarding to the fastboot erase recovery part)

Edit: Okay so It was saying waiting because I wasnt in fastboot mode... (Im an idoit but learning) so I beleive I got done with the fastboot erase part but now when Im trying fastboot flash my CWM (recovery-clockwork-6.0.4.7-falcon.img) its saying "Unknown Partition" and "Error: cannot determine image filename for"

---------- Post added at 03:21 PM ---------- Previous post was at 02:45 PM ----------

Okay after messing around with CMD and your previous instructions I got it! (I think) Im in CWM recovery and trying to install my Supersu from zip. which is already on my phone but when I pick choose zip from /sdcard it says "e: can't mount /sdcard" I', useing a moto g that does not have a external sd card
 
Last edited:

remo0073

Senior Member
May 28, 2014
507
186
0
ITALY
I'm assuming you mean to do this through CMD prompt? when I try to put that in it just says < waiting for device > and it sits there. (regarding to the fastboot erase recovery part)

Edit: Okay so It was saying waiting because I wasnt in fastboot mode... (Im an idoit but learning) so I beleive I got done with the fastboot erase part but now when Im trying fastboot flash my CWM (recovery-clockwork-6.0.4.7-falcon.img) its saying "Unknown Partition" and "Error: cannot determine image filename for"

---------- Post added at 03:21 PM ---------- Previous post was at 02:45 PM ----------

Okay after messing around with CMD and your previous instructions I got it! (I think) Im in CWM recovery and trying to install my Supersu from zip. which is already on my phone but when I pick choose zip from /sdcard it says "e: can't mount /sdcard" I', useing a moto g that does not have a external sd card
If your phone is XT1032 try to install this TWRP instead of CWM using the same procedure (of course in fastboot mode)

Code:
fastboot erase recovery
fastboot flash recovery recoveryname.img
Replace your zip with this SuperSU zip and copy it in SD Card

Then
- go in recovery mode
- INSTALL
- select SuperSU zip
- swipe

I think it should work
 
Last edited:
  • Like
Reactions: ocvo

rayosx

Senior Member
May 29, 2009
113
5
0
If your flashing CWM, flash it then select recovery and press volume up, if it ask for something choose yes, if it still shows no command press UP + POWER button if nothing happens just keep pressing up + power until it boots into recovery.
Your solution it worked for me, thanks a lot :)
 

vishnuchandh

Member
Jan 5, 2013
18
1
0
same problem here. tried install twrp recovery in fastboot without unlock the bootloader. error.. no command in recovery.. cant do anything.. tried all flash recovery method.. anyone pls help

---------- Post added at 03:50 AM ---------- Previous post was at 03:09 AM ----------

Thanks, this worked!
thanks worked for me.. after flash recovery suddenly go to recovery option in bootloader menu. dont reboot the phone.. thanks all :eek::eek::eek::D;)